IT-Passports.comはIT試験問題集を提供するウエブダイトで、ここによく分かります。最もよくて最新で資料を提供いたします。こうして、君は安心で試験の準備を行ってください。弊社の資料を使って、１００％に合格を保証いたします。もし合格しないと、われは全額で返金いたします。
この人材があちこちいる社会で、多くのプレッシャーを感じませんか。学歴はどんなに高くても実力を代表できません。学歴はただ踏み台だけで、あなたの地位を確保できる礎は実力です。Microsoftの070-504認定試験は人気がある認証で、その認証を持ちたい人がたくさんいます。この試験に受かったら自分のキャリアを固定することができます。IT-Passports.comのMicrosoftの070-504試験トレーニング資料はとても良いトレーニングツールで、あなたが首尾よく試験に合格ことを助けられます。試験に合格したら、あなたは国際的に認可され、解雇される心配する必要はありません。
全てのIT職員はMicrosoftの070-504試験をよく知っています。これは一般的に認められている最高級の認証で、あなたのキャリアにヘルプを与えられます。あなたはその認証を持っているのですか。Microsoftの070-504試験は非常に難しい試験ですが、IT-Passports.comのMicrosoftの070-504試験トレーニング資料を手に入れたら大丈夫です。試験が難しいと感じるのは良い方法を選択しないからです。IT-Passports.comを選んだら、成功の手を握ることがきるようになります。
IT-Passports.comが提供する真実と全面的なMicrosoft認証試験について資料で100%で君の試験に合格させてまたあなたに1年無料のサービスを更新し、今はIT-Passports.comのインターネットで無料のMicrosoftの070-504認証試験問題集のソフトウェアがダウンロード することができます。
IT-Passports.comのMicrosoftの070-504試験トレーニング資料は現在で一番人気があるダウンロードのフォーマットを提供します。PDFとソフトのフォーマットで、ダウンロードするのは易いです。IT-Passports.comが提供した製品がIT専門家は実際の経験を活かして作った最も良い製品で、あなたが自分の目標を達成するようにずっと一生懸命頑張っています。
試験番号：070-504問題集
試験科目：Microsoft 「TS: Microsoft .NET Framework 3.5 -C Windows Workflow Foundation」
問題と解答：全176問
あなたはまだ何を待っているのですか。機会が一回だけありますよ。いまMicrosoftの070-504試験問題のフルバージョンを取ることができます。IT-Passports.comというサイトをクッリクしたらあなたの願いを果たせます。あなたが最も良いMicrosoftの070-504試験トレーニング資料を見つけましたから、IT-Passports.comの問題と解答を安心に利用してください。きっと試験に合格しますよ。
IT-Passports.comが提供したMicrosoftの070-504トレーニング資料はあなたが自分の夢を実現することを助けられます。 IT-Passports.comはすべてのMicrosoftの070-504試験に受かるための資料に含まれていますから。IT-Passports.comを手にすると、あなたは安心に試験の準備に身を投げられるようになります。IT-Passports.comは高品質なトレーニング資料を提供して、あなたが試験に合格することを保証します。明るい未来を準備してあげます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/070-504.html
NO.1 Question
You use a built-in tracking service to track specific workflow parameters.
You need to check whether the workflow parameters have been stored in the tracking database.
What should you do? (Each correct answer presents part of a solution. Choose two.)
A. Display the contents of the WorkflowInstance table of the tracking database.
B. Include the SqlTrackingQuery class in a code segment to retrieve tracked workflows and
SqlTrackingWorkflowInstance class to inspect them.
C. Use the ActivityTrackingLocation class to determine if the value has been set to a database.
D. Display the contents of the TrackingDataItem table of the tracking database.
Answer: B AND D
Microsoft 070-504 070-504練習問題 070-504
NO.2 Question
A custom activity defined in an assembly named LitwareActivities is defined as follows:
namespace LitwareActivities
{
public class WriteLineActivity : Activity
{
protected override ActivityExecutionStatus Execute(ActivityExecutionContext executionContext)
{
Console.WriteLine(Message);
return ActivityExecutionStatus.Closed;
}
private string _message;
public string Message
{
get { return _message; }
set { _message = value; }
}
...
}
}
You need to create a sequential workflow where the execution path can be generated on the fly by an
application.
Which XML code segment should you use?
A. <SequentialWorkflowActivity
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
B. <Workflow
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
C. <Workflow
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
D. <SequentialWorkflowActivity
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
Answer: A
Microsoft 070-504 070-504 070-504
NO.3 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
The application is exposed as a Web service. You use WebServiceInputActivity activities in your workflow.
You need to ensure that the following requirements are met:
All exceptions are caught at runtime.
The exceptions are thrown as SOAP exceptions back to the client application without changing the course
of the workflow.
What should you do?
A. Add the ThrowActivity activity after the WebServiceInputActivity activity.
B. Add the ThrowActivity activity before the WebServiceInputActivity activity.
C. Add the WebServiceFaultActivity activity after the WebServiceInputActivity activity.
D. Add the WebServiceFaultActivity activity before the WebServiceInputActivity activity.
Answer: C
Microsoft問題集 070-504 070-504練習問題 070-504
NO.4 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
The application uses a markup-only workflow.
The workflow will also require the use of a code-beside file.
The following code fragment is implemented in XAML.
<SequentialWorkflowActivity
x:Class="ProcessNewCustomer" Name="ProcessCustomer" xmlns=
"http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
</SequentialWorkflowActivity>
You need to create a class declaration to implement the custom code.
Which code segment should you use?
A. Partial Public Class ProcessNewCustomer
??Inherits SequentialWorkflowActivity
??' Class implementation code appears here.
End Class
B. Public Class ProcessNewCustomer
??Inherits SequentialWorkflowActivity
??' Class implementation code appears here.
End Class
C. Public Class ProcessNewCustomerCode
??Inherits ProcessNewCustomer
??' Class implementation code appears here.
End Class
D. Partial Public Class ProcessCustomer
??Inherits SequentialWorkflowActivity
??' Class implementation code appears here.
End Class
Answer: A
Microsoft 070-504認証試験 070-504参考書 070-504練習問題 070-504練習問題
NO.5 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
A Windows Forms application functions as the workflow host by using the
DefaultWorkflowSchedulerService.
You create a WorkflowRuntime instance in the Load event of the forms. You also subscribe to the
WorkflowCompleted event.
You need to ensure that the application displays the message in the Label control named lblStatus when
the WorkflowCompleted event is raised.
Which code segment should you use?
A. Private Sub UpdateInstances(ByVal id As Guid)
??If Me.InvokeRequired Then
????lblStatus.Text = id.ToString & " completed"
??End If
End Sub
B. Private Sub UpdateInstances(ByVal id As Guid)
??If (Not Me.InvokeRequired) Then
????lblStatus.Text = id.ToString & " completed"
??End If
End Sub
C. Private Delegate Sub UpdateInstancesDelegate(ByVal id As Guid)
Private Sub UpdateInstances(ByVal id As Guid)
??If Me.InvokeRequired Then
????Me.Invoke(New _
?????UpdateInstancesDelegate(AddressOf UpdateInstances), _
?????New Object() {id})
??Else
????lblStatus.Text = id.ToString & " completed"
??End If
End Sub
D. Private Delegate Sub UpdateInstancesDelegate(ByVal id As Guid)
Private Sub UpdateInstances(ByVal id As Guid)
??If Not Me.InvokeRequired Then
????Me.Invoke(New _
????UpdateInstancesDelegate(AddressOf UpdateInstances), _
????New Object() {id})
??Else
????lblStatus.Text = id.ToString & " completed"
??End If
End Sub
Answer: C
Microsoft 070-504認定資格 070-504認定資格 070-504 070-504
NO.6 Question
You are creating a Windows Workflow Foundation custom activity by using Microsoft .NET Framework
3.5.
The custom activity has the following features:
It uses a voting process.
It completes execution after the receipt of a Yes or a No vote from an end user.
The voting process is managed by a local service of type VotingService. The voting process can take 15
to 20 days.
You need to ensure that the VotingService service informs the custom activity when a vote is receiveD.
What should you do?
A. Implement the VotingService service to invoke a method in the custom activity and pass the voting data
as a workflow parameter.
B. Implement the VotingService service to schedule the custom activity to execute and pass the voting
data as a workflow parameter.
C. Implement the VotingService service to enqueue the voting data in a workflow queue that was
configured by the custom activity.
D. Create a dependency property in the custom activity for the voting data. Implement the VotingService
service to configure the dependency property when data is received.
Answer: C
Microsoft 070-504 070-504参考書
NO.7 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. You use
the state machine workflow in the application.
You plan to implement a mechanism that allows a host application to query a state machine workflow
instance that is currently executing.
You write the following code segment. (Line numbers are included for reference only.)
01 WorkflowRuntime runtime = new WorkflowRuntime();
02 WorkflowInstance instance =
03 ?runtime.CreateWorkflow(typeof(Workflow1));
04 instance.Start();
05
You need to identify the current state of the workflow.
Which code segment should you insert at line 05?
A. string currentstate =
?instance.GetWorkflowDefinition().ToString();
B. string currentstate =
?instance.GetWorkflowDefinition().ExecutionStatus.ToString();
C. StateMachineWorkflowInstance smwi =
?new StateMachineWorkflowInstance(runtime, instance.InstanceId);
string currentstate = smwi.StateHistory[0];
D. StateMachineWorkflowInstance smwi =
?new StateMachineWorkflowInstance(runtime, instance.InstanceId);
string currentstate = smwi.CurrentStateName;
Answer: D
Microsoft 070-504 070-504認定試験 070-504 070-504 070-504練習問題
NO.8 Question
A custom activity defined in an assembly named LitwareActivities is defined as follows:
Namespace LitwareActivities
Public Class WriteLineActivity
Inherits Activity
Protected Overrides Function Execute(ByVal executionContext As
System.Workflow.ComponentModel.ActivityExecutionContext) _ As
System.Workflow.ComponentModel.ActivityExecutionStatus
Console.WriteLine(Message)
Return ActivityExecutionStatus.Closed
End Function
Private aMessage As String
Public Property Message() As String
Get
Return aMessage
End Get
Set(ByVal value As String)
aMessage = value
End Set
End Property
End Class
End Namespace
You need to create a sequential workflow where the execution path can be generated on the fly by an
application.
Which XML code segment should you use?
A. <SequentialWorkflowActivity
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
B. <Workflow
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
C. <Workflow
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
D. <SequentialWorkflowActivity
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
Answer: A
Microsoft 070-504 070-504練習問題 070-504練習問題 070-504
NO.9 You are writing a sequential console workflow that consists of a delay activity and a code activity, as
shown in the exhibit. (Click the Exhibit button for the sequential console workflow image)
In the execution code of the second activity, you try to modify the workflow as follows:
private void codeActivity_ExecuteCode(object sender, EventArgs e)
{
CodeActivity delay = sender as CodeActivity;
Console.WriteLine(delay.Name);
WorkflowChanges workflowChanges = new WorkflowChanges(this);
CodeActivity codeActivity = new CodeActivity();
codeActivity.Name = "codeActivity2";
codeActivity.ExecuteCode += new EventHandler(codeActivity2_ExecuteCode);
workflowChanges.TransientWorkflow.Activities.Add(codeActivity);
this.ApplyWorkflowChanges(workflowChanges);
}
private void codeActivity2_ExecuteCode(object sender, EventArgs e)
{
CodeActivity codeActivity = sender as CodeActivity;
Console.WriteLine(codeActivity.Name);
Console.ReadLine();
}
You also have set the modifiability of the workflow to a code condition that is set to the following function:
private void UpdateCondition(object sender, ConditionalEventArgs e)
{
if (TimeSpan.Compare(this.delayActivity.TimeoutDuration, new TimeSpan(0, 0, 5)) > 0) {
e.Result = false;
}
else {
e.Result = true;
}
}
Which code segment should you use to handle the exception?
A. workflowChanges.TransientWorkflow.Activities.Add(codeActivity);
try {
this.ApplyWorkflowChanges(workflowChanges);
}
catch (ArgumentOutOfRangeException ex) {
Console.WriteLine(ex.GetType().ToString());
Console.ReadLine();
}
B. workflowChanges.TransientWorkflow.Activities.Add(codeActivity);
try {
this.ApplyWorkflowChanges(workflowChanges);
}
catch (InvalidProgramException ex) {
Console.WriteLine(ex.GetType().ToString());
Console.ReadLine();
}
C. workflowChanges.TransientWorkflow.Activities.Add(codeActivity);
try {
this.ApplyWorkflowChanges(workflowChanges);
}
catch (InvalidOperationException ex) {
Console.WriteLine(ex.GetType().ToString());
Console.ReadLine();
}
D. workflowChanges.TransientWorkflow.Activities.Add(codeActivity);
try {
this.ApplyWorkflowChanges(workflowChanges);
}
catch (OverflowException ex) {
Console.WriteLine(ex.GetType().ToString());
Console.ReadLine();
}
Answer: C
Microsoft 070-504認定試験 070-504認定試験 070-504問題集 070-504認定試験
NO.10 Question
You are creating a Windows Workflow Foundation custom activity by using Microsoft .NET Framework
3.5.
You need to ensure that the following requirements are met:
The custom activity communicates with a local service hosted in the workflow runtime.
The local service receives data from the custom activity.
What should you do?
A. Define a method for the local service. Use the custom activity to invoke the method and pass data as a
method parameter.
B. Define a new event for the custom activity. Use the local service to subscribe to the event and receive
the data in the event arguments.
C. Place the data in the UserData property of the custom activity. Use the local service to read the data
directly from the UserData property.
D. Create and configure a workflow queue when the custom activity initializes. Use the custom activity to
write data to the workflow queue. Use the local service to read data from the workflow queue when the
data arrives.
Answer: A
Microsoft 070-504認定試験 070-504 070-504 070-504認証試験
NO.11 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
The application uses a markup-only workflow.
The workflow will also require the use of a code-beside file.
The following code fragment is implemented in XAML.
<SequentialWorkflowActivity
x:Class="ProcessNewCustomer" Name="ProcessCustomer" xmlns=
"http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
</SequentialWorkflowActivity>
You need to create a class declaration to implement the custom code.
Which code segment should you use?
A. public partial class ProcessNewCustomer
? : SequentialWorkflowActivity
{
??// Class implementation code appears here.
}
B. public class ProcessNewCustomer
? : SequentialWorkflowActivity
{
??// Class implementation code appears here.
}
C. public class ProcessNewCustomerCode
? : ProcessNewCustomer
{
??// Class implementation code appears here.
}
D. public partial class ProcessCustomer
? : SequentialWorkflowActivity
{
??// Class implementation code appears here.
}
Answer: A
Microsoft 070-504 070-504問題集
NO.12 Question
You create an application in which users design simple sequential workflows. The designs are stored as
XOML in a SQL database. You need to start one of these sequential workflows from within your own
workflow.
What should you do?
A. Include a custom activity with a code segment that includes an invocation to the CreateWorkflow
method of the WorkflowRuntime class and then starts the workflow. The signature of the CreateWorkflow
method invoked uses only the workflowType parameter.
B. Include a custom activity with a code segment that includes an invocation to the CreateWorkflow
method of WorkflowRuntime class and then starts the workflow. The signature of the CreateWorkflow
method invoked uses only the XmlReader and workflowDefinitionReader parameters.
C. Include a custom activity with a code segment that includes an invocation to the CreateWorkflow
method of the WorkflowRuntime class and then starts the workflow. The signature of the CreateWorkflow
method invoked uses only the workflowType, Dictionary<string,Object> namedArgumentValues, and Guid
instanceId parameters.
D. Include and configure an InvokeWorkflow activity
Answer: B
Microsoft認定証 070-504認定証 070-504認定資格 070-504過去問 070-504 070-504
NO.13 Question
You are writing a sequential console workflow that consists of a delay activity and a code activity, as
shown in the exhibit. (Click the Exhibit button for the sequential console workflow image.)
In the execution code of the second activity, you try to modify the workflow as follows:
Private Sub delayActivity_InitializeTimeoutDuration(ByVal sender As System.Object, ByVal e As
System.EventArgs)
Console.Title = "Modifiability of a Workflow"
Console.WriteLine("Wait ...")
End Sub
Private Sub codeActivity_ExecuteCode(ByVal sender As System.Object, ByVal e As System.EventArgs)
Dim delay As DelayActivity = CType(sender, DelayActivity)
Console.WriteLine(delay.Name)
Dim workflowChanges As New WorkflowChanges(Me)
Dim codeActivity As New CodeActivity()
codeActivity.Name = "codeActivity2"
AddHandler codeActivity.ExecuteCode, AddressOf Me.codeActivity2_ExecuteCode
workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Me.ApplyWorkflowChanges(workflowChanges)
End Sub
Private Sub codeActivity2_ExecuteCode(ByVal sender As System.Object, ByVal e As System.EventArgs)
Dim codeActivity As CodeActivity = CType(sender, CodeActivity)
Console.WriteLine(codeActivity.Name)
Console.ReadLine()
End Sub
You also have set the modifiability of the workflow to a code condition that is set to the following function:
Private Sub UpdateCondition(ByVal sender As System.Object, ByVal e As ConditionalEventArgs)
If (TimeSpan.Compare(Me.delayActivity.TimeoutDuration, New TimeSpan(0, 0, 5)) > 0) Then
e.Result = False
Else
e.Result = True
End If
End Sub
Which code segment should you use to handle the exception?
A. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As ArgumentOutOfRangeException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
B. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As InvalidProgramException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
C. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As InvalidOperationException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
D. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As OverflowException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
Answer: C
Microsoft認定資格 070-504 070-504
NO.14 Question
You create a workflow host application by using Microsoft .NET Framework 3.5. You use Windows
Workflow Foundation to create the application.
You need to configure the workflow runtime to ensure that all the workflow instances run asynchronously.
Which code segment should you use?
A. Dim runtime As New WorkflowRuntime()
runtime.StartRuntime()
Dim instance As WorkflowInstance = _
?runtime.CreateWorkflow(GetType(CustomerWorkflow))
instance.Start()
B. Dim runtime As New WorkflowRuntime()
runtime.StartRuntime()
Dim scheduler As ManualWorkflowSchedulerService = _
?runtime.GetService(Of ManualWorkflowSchedulerService)()
Dim instance As WorkflowInstance = _
?runtime.CreateWorkflow(GetType(CustomerWorkflow))
scheduler.RunWorkflow(instance.InstanceId)
C. Dim runtime As New WorkflowRuntime()
Dim scheduler As New ManualWorkflowSchedulerService()
runtime.AddService(scheduler)
runtime.StartRuntime()
Dim instance As WorkflowInstance = _
?runtime.CreateWorkflow(GetType(CustomerWorkflow))
instance.Start()
D. Dim runtime As New WorkflowRuntime()
runtime.StartRuntime()
Dim scheduler As New DefaultWorkflowSchedulerService()
runtime.AddService(scheduler)
Dim instance As WorkflowInstance = _
?runtime.CreateWorkflow(GetType(CustomerWorkflow))
instance.Start()
Answer: A
Microsoft認定試験 070-504参考書 070-504練習問題 070-504 070-504 070-504参考書
NO.15 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application uses a sequential workflow.
The host application creates a workflow instance and stores it in a variable named instance. When the
workflow is executed, a business requirement requires the workflow execution to pause for a few minutes.
The host uses the following code segment.
WorkflowRuntime runtime = new WorkflowRuntime();
WorkflowInstance instance =
?runtime.CreateWorkflow( typeof(Workflow1));
instance.Start();
You need to ensure that the following requirements are met:
The workflow execution is temporarily pauseD. The workflow state is preserved in memory.
Which line of code should you use?
A. instance.Unload();
B. instance.TryUnload();
C. instance.Suspend(null);
D. instance.Terminate(null);
Answer: C
Microsoft 070-504 070-504認証試験 070-504 070-504
NO.16 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application contains a state workflow.
You write the following code segment.
WorkflowRuntime runtime = new WorkflowRuntime();
WorkflowInstance instance = runtime.CreateWorkflow(
?typeof(DynamicUpdateWorkflow));
instance.Start();
StateMachineWorkflowInstance smwi =
?new StateMachineWorkflowInstance(runtime,
?instance.InstanceId);
A dependency property named Status is defined in this workflow.
The value of a variable named amount is used to set the state of the workflow.
You need to ensure that the host application changes the state of the workflow on the basis of the value of
the amount variable.
What are the two possible code segments that you can use to achieve this goal? (Each correct answer
presents a complete solution. Choose two.)
A. if (amount >= 1000)
?smwi.SetState("HighValueState");
else
?smwi.SetState("LowValueState");
B. if (amount >= 1000)
?smwi.StateMachineWorkflow.SetValue
?(DynamicUpdateWorkflow.StatusProperty,"HighValueState")
else
?smwi.StateMachineWorkflow.SetValue
?(DynamicUpdateWorkflow.StatusProperty, "LowValueState");
C. if (amount >= 1000)
?instance.GetWorkflowDefinition().SetValue
?(DynamicUpdateWorkflow.StatusProperty,"HighValueState");
else
?instance.GetWorkflowDefinition().SetValue
?(DynamicUpdateWorkflow.StatusProperty,"LowValueState");
D. if (amount >= 1000)
{
??StateActivity high = (StateActivity)
???smwi.StateMachineWorkflow.Activities["HighValueState"];
??smwi.SetState(high);
}
else
{
??StateActivity low = (StateActivity)
???smwi.StateMachineWorkflow.Activities["LowValueState"];
??smwi.SetState(low);
}
Answer: A AND D
Microsoft練習問題 070-504練習問題 070-504
NO.17 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
A Windows Forms application functions as the workflow host by using the
DefaultWorkflowSchedulerService.
You create a WorkflowRuntime instance in the Load event of the forms. You also subscribe to the
WorkflowCompleted event.
You need to ensure that the application displays the message in the Label control named lblStatus when
the WorkflowCompleted event is raised.
Which code segment should you use?
A. private void UpdateInstances(Guid id) {
??if (this.InvokeRequired) {
????lblStatus.Text = id + " completed";
??}
}
B. private void UpdateInstances(Guid id) {
??if (!this.InvokeRequired) {
????lblStatus.Text = id + " completed";
??}
}
C. delegate void UpdateInstancesDelegate(Guid id);
private void UpdateInstances(Guid id) {
??if (this.InvokeRequired) {
????this.Invoke(
?????new UpdateInstancesDelegate(UpdateInstances),
?????new object[] { id });
??} else {
????lblStatus.Text = id + " completed";
??}
}
D. delegate void UpdateInstancesDelegate(Guid id);
private void UpdateInstances(Guid id) {
??if (!this.InvokeRequired) {
????this.Invoke(
?????new UpdateInstancesDelegate(UpdateInstances),
?????new object[] { id });
??} else {
????lblStatus.Text = id + " completed";
??}
}
Answer: C
Microsoft認定資格 070-504 070-504 070-504
NO.18 Question
You are creating a Windows Workflow Foundation custom activity by using Microsoft .NET Framework
3.5.
The workflow has an event-based activity that waits for an item to arrive in a workflow queue.
You need to ensure that the workflow queue is available for local services before the custom activity is
executed.
What should you do?
A. Provide a default constructor for the custom activity. Create and register the queue in the
implementation of the constructor.
B. Override the Initialize method. Create and register the queue in the implementation of the Initialize
method.
C. Override the InitializeProperties method. Create and register the queue in the implementation of the
InitializeProperties method.
D. Override the OnWorkflowChangesCompleted method. Create and register the queue in the
implementation of the OnWorkflowChangesCompleted method.
Answer: B
Microsoft 070-504認証試験 070-504 070-504過去問 070-504認定試験
NO.19 Question
You create a workflow host application by using Microsoft .NET Framework 3.5. You use Windows
Workflow Foundation to create the application.
You need to configure the workflow runtime to ensure that all the workflow instances run asynchronously.
Which code segment should you use?
A. WorkflowRuntime runtime = new WorkflowRuntime();
runtime.StartRuntime();
WorkflowInstance instance =
?runtime.CreateWorkflow(typeof(CustomerWorkflow));
instance.Start();
B. WorkflowRuntime runtime = new WorkflowRuntime();
runtime.StartRuntime();
ManualWorkflowSchedulerService scheduler =
?runtime.GetService<ManualWorkflowSchedulerService>();
WorkflowInstance instance =
?runtime.CreateWorkflow(typeof(CustomerWorkflow));
scheduler.RunWorkflow(instance.InstanceId);
C. WorkflowRuntime runtime = new WorkflowRuntime();
ManualWorkflowSchedulerService scheduler =
?new ManualWorkflowSchedulerService();
runtime.AddService(scheduler);
runtime.StartRuntime();
WorkflowInstance instance =
?runtime.CreateWorkflow(typeof(CustomerWorkflow));
instance.Start();
D. WorkflowRuntime runtime = new WorkflowRuntime();
runtime.StartRuntime();
DefaultWorkflowSchedulerService scheduler =
?new DefaultWorkflowSchedulerService();
runtime.AddService(scheduler);
WorkflowInstance instance =
?runtime.CreateWorkflow(typeof(CustomerWorkflow));
instance.Start();
Answer: A
Microsoft 070-504 070-504
NO.20 Question
You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application uses a sequential workflow.
The host application creates a workflow instance and stores it in a variable named instance. When the
workflow is executed, a business requirement requires the workflow execution to pause for a few minutes.
The host uses the following code segment.
Dim runtime As New WorkflowRuntime()
Dim instance As WorkflowInstance = _
?runtime.CreateWorkflow(GetType(MyWorkflow))
instance.Start()
You need to ensure that the following requirements are met:
The workflow execution is temporarily pauseD. The workflow state is preserved in memory.
Which line of code should you use?
A. instance.Unload()
B. instance.TryUnload()
C. instance.Suspend(Nothing)
D. instance.Terminate(Nothing)
Answer: C
Microsoft 070-504 070-504 070-504問題集 070-504 070-504認定資格
IT-Passports.comのIT専門家たちは彼らの豊富な知識と経験を活かして最新の短期で成果を取るトレーニング方法を研究しました。このトレーニング方法は受験生の皆さんに短い時間で予期の成果を取らせます。特に仕事しながら勉強している受験生たちにとって不可欠なツールです。IT-Passports.comトレーニング資料を選んだら、あなたは自分の夢を実現できます。
没有评论:
发表评论