Microsoftの70-562認定試験を受けて70-562認証資格を取得したいですか。IT-Passports.comはあなたの成功を保証することができます。もちろん、試験の準備をするときに試験に関連する知識を学ぶのは必要です。なお大切なのは、自分に相応しい効率的なツールを選択することです。IT-Passports.comの70-562問題集はあなたに合う最善の勉強法です。この高品質の問題集は信じられないほどの結果を見せることができます。自分が試験に合格できない心配があれば、はやくIT-Passports.comのウェブサイトをクリックしてもっと多くの情報を読んでください。
70-562認定試験はずっと人気があるのです。最近IT試験を受けて認証資格を取ることは一層重要になりました。たとえばMicrosoft、IBM、Cisco、VMware、SAPなどのいろいろな試験は今では全部非常に重要な試験です。より多くの人々は複数の資格を取得するために多くの70-562試験を受験したいと思っています。もちろん、このようにすればあなたがすごい技能を身につけていることが証明されることができます。しかし、仕事しながら試験の準備をすることはもともと大変で、複数の試験を受験すれば非常に多くの時間が必要です。いまこのようなことで悩んいるのでしょうか。それは問題ではないですよ。IT-Passports.comあなたを時間を節約させことができますから。IT-Passports.comのさまざまなIT試験の問題集はあなたを受験したい任意の試験に合格させることができます。70-562認定試験などの様々な認定試験で、受験したいなら躊躇わずに申し込んでください。心配する必要はないです。
試験番号：70-562問題集
試験科目：Microsoft 「TS: Microsoft .NET Framework 3.5, ASP.NET Application Development」
問題と解答：全133問
ただ一つの試験の準備をするだけで時間をたくさん無駄にすることをやめてください。はやくIT-Passports.comの70-562問題集を入手しましょう。この問題集を持っていたら、どうやって効率的に試験の準備をすべきなのかをよく知るようになります。この70-562問題集はあなたを楽に試験に合格させる素晴らしいツールですから、この成功できチャンスを見逃せば絶対後悔になりますから、尻込みしないで急いで行動しましょう。
今の競争の激しいのIT業界の中にMicrosoft 70-562認定試験に合格して、自分の社会地位を高めることができます。弊社のIT業で経験豊富な専門家たちが正確で、合理的なMicrosoft 70-562認証問題集を作り上げました。 弊社の勉強の商品を選んで、多くの時間とエネルギーを節約こともできます。
IT-Passports.com Microsoftの70-562試験問題集は完全な無制限のダンプが含まれていますから、IT-Passports.comを利用したら気楽に試験に受かることができます。製品検定合格の証明書あるいは他の人気がある身分検定によって、IT-Passports.com Microsoftの70-562試験トレーニング資料の長所を完璧に見せることができます。依頼だけでなく、指導のことも最高です。IT-Passports.com Microsoftの70-562試験トレーニング資料に含まれている問題と解答を利用して、Microsoftの70-562認定試験に合格することができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/70-562.html
NO.1 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named enterName.aspx. The Web page contains a TextBox control named
txtName. The Web page cross posts to a page named displayName.aspx that contains a Label control
named lblName.
You need to ensure that the lblName Label control displays the text that was entered in the txtName
TextBox control.
Which code segment should you use?
A. lblName.Text = Request.QueryString["txtName"];
B. TextBox txtName = FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
C. TextBox txtName = Parent.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
D. TextBox txtName = PreviousPage.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
Answer: D
Microsoft 70-562 70-562 70-562 70-562
NO.2 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application has a Web form file named MovieReviews.aspx.
The MovieReviews.aspx file connects to a LinqDataSource DataSource named LinqDataSource1 that
has a primary key named MovieID.
The application has a DetailsView control named DetailsView1.
The MovieReviews.aspx file contains the following code fragment. (Line numbers are included for
reference only.)
01 <asp:DetailsView ID="DetailsView1" runat="server" DataSourceID="LinqDataSource1"
02
03 />
04 <Fields>
05 <asp:BoundField DataField="MovieID" HeaderText="MovieID" InsertVisible="False"
ReadOnly="True" SortExpression="MovieID" />
06 <asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" />
07 <asp:BoundField DataField="Theater" HeaderText="Theater" SortExpression="Theater" />
08 <asp:CommandField ShowDeleteButton="false" ShowEditButton="True"
ShowInsertButton="True" />
09 </Fields>
10 </asp:DetailsView>
You need to ensure that the users can insert and update content in the DetailsView1 control.
You also need to prevent duplication of the link button controls for the Edit and New operations.
Which code segment should you insert at line 02?
A. AllowPaging="false"
AutoGenerateRows="false"
B. AllowPaging="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
C. AllowPaging="true"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
D. AllowPaging="false"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
Answer: B
Microsoft 70-562練習問題 70-562認定資格 70-562認定試験 70-562 70-562認定証
NO.3 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named Default.aspx in the root of the application. You add an
ImageResources.resx resource file in the App_GlobalResources folder. The ImageResources.resx file
contains a localized resource named LogoImageUrl.
You need to retrieve the value of LogoImageUrl.
Which code segment should you use?
A. string logoImageUrl = (string)GetLocalResourceObject("LogoImageUrl");
B. string logoImageUrl = (string)GetGlobalResourceObject("Default", "LogoImageUrl");
C. string logoImageUrl = (string)GetGlobalResourceObject("ImageResources", "LogoImageUrl");
D. string logoImageUrl = (string)GetLocalResourceObject("ImageResources.LogoImageUrl");
Answer: C
Microsoft 70-562問題集 70-562 70-562 70-562認証試験 70-562認定証
NO.4 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. You
create a Web page that contains the following two XML fragments. (Line numbers are included for
reference only.)
01 <script runat="server">
02
03 </script>
04 <asp:ListView ID="ListView1" runat="server"
05 DataSourceID="SqlDataSource1"
06
07 >
08 <ItemTemplate>
09 <td>
10 <asp:Label ID="LineTotalLabel" runat="server" Text='<%# Eval("LineTotal") %>' />
11 </td>
12 </ItemTemplate>
The SqlDataSource1 object retrieves the data from a Microsoft SQL Server 2005 database table. The
database table has a column named LineTotal.
You need to ensure that when the size of the LineTotal column value is greater than seven characters, the
column is displayed in red color.
What should you do?
A. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotalLabel");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
B. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotal");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
C. Insert the following code segment at line 06.
OnDataBinding="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotal";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
D. Insert the following code segment at line 06.
OnDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotalLabel";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
Answer: A
Microsoft参考書 70-562 70-562 70-562
NO.5 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application has a mobile Web form that contains the following ObjectList control.
<mobile:ObjectList ID="ObjectListCtrl" OnItemCommand="ObjectListCtrl_ItemCommand"
Runat="server">
<Command Name="CmdDisplayDetails" Text="Details" />
<Command Name="CmdRemove" Text="Remove" />
</mobile:ObjectList>
You create an event handler named ObjectListCtrl_ItemCommand.
You need to ensure that the ObjectListCtrl_ItemCommand handler detects the selection of the
CmdDisplayDetails item.
Which code segment should you write?
A. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandName == "CmdDisplayDetails") {
}
}
B. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandArgument.ToString() == "CmdDisplayDetails") {
}
}
C. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = sender as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
D. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = e.CommandSource as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
Answer: A
Microsoft 70-562 70-562認定試験
NO.6 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a custom Web user control named SharedControl. The control will be compiled as a library.
You write the following code segment for the SharedControl control. (Line numbers are included for
reference only.)
01 protected override void OnInit(EventArgs e)
02 {
03 base.OnInit(e);
04
05 }
All the master pages in the ASP.NET application contain the following directive.
<%@ Master Language="C#" EnableViewState="false" %>
You need to ensure that the state of the SharedControl control can persist on the pages that reference a
master page.
Which code segment should you insert at line 04?
A. Page.RegisterRequiresPostBack(this);
B. Page.RegisterRequiresControlState(this);
C. Page.UnregisterRequiresControlState(this);
D. Page.RegisterStartupScript("SharedControl","server");
Answer: B
Microsoft 70-562 70-562過去問 70-562
NO.7 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The application contains the following device filter element in the Web.config file.
<filter name="isHtml" compare="PreferredRenderingType"argument="html32" />
The application contains a Web page that has the following image control. (Line numbers are included for
reference only.)
01 <mobile:Image ID="imgCtrl" Runat="server">
03 </mobile:Image>
You need to ensure that the following conditions are met:
The imgCtrl Image control displays he highRes.jpg file if the Web browser supports html.
The imgCtrl Image control displays lowRes.gif if the Web browser does not support html
Which DeviceSpecific element should you insert at line 02?
A. <DeviceSpecific>
<Choice Filter="isHtml" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
B. <DeviceSpecific>
<Choice Filter="isHtml" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="isHtml" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
C. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
D. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="PreferredRenderingType" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
Answer: A
Microsoft問題集 70-562 70-562参考書 70-562問題集
NO.8 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add an XmlDataSource control named XmlDataSource1 to the Web page. XmlDataSource1 is bound
to an XML document with the following structure.
<?xml version="1.0" encoding="utf-8" ?>
<clients>
<client ID="1" Name="John Evans" />
<client ID="2" Name="Mike Miller"/>
...
</clients>
You also write the following code segment in the code-behind file of the Web page.
protected void BulletedList1_Click(object sender, BulletedListEventArgs e) {
//...
}
You need to add a BulletedList control named BulletedList1 to the Web page that is bound to
XmlDataSource1.
Which code fragment should you use?
A. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSource="XmlDataSource1"
DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
B. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="Name" DataMember="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
C. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSourceID="XmlDataSource1" DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
D. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="ID" DataValueField="Name"
onclick="BulletedList1_Click">
</asp:BulletedList>
Answer: C
Microsoft練習問題 70-562認定試験 70-562 70-562 70-562
NO.9 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code segment to create a class named MultimediaDownloader that implements
the IHttpHandler interface.
namespace Contoso.Web.UI {
public class MultimediaDownloader : IHttpHandler {
...
}
}
The MultimediaDownloader class performs the following tasks:
It returns the content of the multimedia files from the Web server
It processes requests for the files that have the .media file extension
The .media file extension is mapped to the aspnet_isapi.dll file in Microsoft IIS 6.0.
You need to configure the MultimediaDownloader class in the Web.config file of the application.
Which code fragment should you use?
A. <httpHandlers>
<add verb="*.media" path="*" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
B. <httpHandlers>
<add verb="HEAD" path="*.media" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
C. <httpHandlers>
<add verb="*" path="*.media" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
D. <httpHandlers>
<add verb="GET,POST" path="*" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
Answer: C
Microsoft認定証 70-562 70-562 70-562認証試験 70-562認定資格
NO.10 You modify an existing Microsoft ASP.NET application by using the Microsoft .NET Framework version
3.5.
You add a theme to the ASP.NET application.
You need to apply the theme to override any settings of individual controls.
What should you do?
A. In the Web.config file of the application, set the Theme attribute of the pages element to the name of
the theme.
B. In the Web.config file of the application, set the StyleSheetTheme attribute of the pages element to the
name of the theme.
C. Add a master page to the application. In the @Master directive, set the Theme attribute to the name of
the theme.
D. Add a master page to the application. In the @Master directive, set the StyleSheetTheme attribute to
the name of the theme.
Answer: A
Microsoft問題集 70-562 70-562参考書 70-562練習問題
NO.11 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The Web site uses C# as the programming language. You plan to add a code file written in Microsoft
VB.NET to the application. This code segment will not be converted to C#.
You add the following code fragment to the Web.config file of the application.
<compilation debug="false">
<codeSubDirectories>
<add directoryName="VBCode"/>
</codeSubDirectories>
</compilation>
You need to ensure that the following requirements are met:
The existing VB.NET file can be used in the Web application
The file can be modified and compiled at run time
What should you do?
A. Create a new class library that uses VB.NET as the programming language.
Add the VB.NET code file to the class library. Add a reference to the class library in the application.
B. Create a new folder named VBCode at the root of the application. Place the VB.NET code file in this
new folder.
C. Create a new Microsoft Windows Communication Foundation (WCF) service project that uses VB.NET
as the programming language. Expose the VB.NET code functionality through the WCF service. Add a
service reference to the WCF service project in the application.
D. Create a new folder named VBCode inside the App_Code folder of the application. Place the VB.NET
code file in this new folder.
Answer: D
Microsoft 70-562 70-562
NO.12 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application runs on Microsoft IIS 6.0.
You create a page named oldPage.aspx.
You need to ensure that the following requirements are met when a user attempts to access the page:
The browser diplays the URL of the oldPage.aspx page.
The browser displays the page named newPage.aspx
Which code segment should you use?
A. Server.Transfer("newPage.aspx");
B. Response.Redirect("newPage.aspx");
C. if (Request.Url.UserEscaped) {
Server.TransferRequest("newPage.aspx");
}
else {
Response.Redirect("newPage.aspx", true);
}
D. if (Request.Url.UserEscaped) {
Response.RedirectLocation = "oldPage.aspx";
Response.Redirect("newPage.aspx", true);
}
else {
Response.Redirect("newPage.aspx");
}
Answer: A
Microsoft練習問題 70-562認定試験 70-562 70-562 70-562
NO.13 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create two user controls named UserCtrlA.ascx and UserCtrlB.ascx. The user controls postback to
the server.
You create a new Web page that has the following ASPX code.
<asp:CheckBox ID="Chk" runat="server" oncheckedchanged="Chk_CheckedChanged"
AutoPostBack="true" />
<asp:PlaceHolder ID="PlHolder" runat="server"></asp:PlaceHolder>
To dynamically create the user controls, you write the following code segment for the Web page.
public void LoadControls() {
if (ViewState["CtrlA"] != null) {
Control c;
if ((bool)ViewState["CtrlA"] == true) {
c = LoadControl("UserCtrlA.ascx"); }
else {
c = LoadControl("UserCtrlB.ascx");
}
ID = "Ctrl";
PlHolder.Controls.Add(c);
}
}
protected void Chk_CheckedChanged(object sender, EventArgs e) {
ViewState["CtrlA"] = Chk.Checked;
PlHolder.Controls.Clear();
LoadControls();
}
You need to ensure that the user control that is displayed meets the following requirements:
It is recreated during postback
It retains its state.
Which method should you add to the Web page?
A. protected override object SaveViewState()
{
LoadControls();
return base.SaveViewState();
}
B. protected override void Render(HtmlTextWriter writer) {
LoadControls();
base.Render(writer);
}
C. protected override void OnLoadComplete(EventArgs e) {
base.OnLoadComplete(e);
LoadControls();
}
D. protected override void LoadViewState(object savedState) {
base.LoadViewState(savedState);
LoadControls();
}
Answer: D
Microsoft 70-562参考書 70-562 70-562認定資格
NO.14 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment. (Line numbers are included for reference only.)
01 <asp:RequiredFieldValidator
02 ID="rfValidator1" runat="server"
03 Display="Dynamic" ControlToValidate="TextBox1"
04
05 >
06
07 </asp:RequiredFieldValidator>
08
09 <asp:ValidationSummary DisplayMode="List"
10 ID="ValidationSummary1" runat="server" />
You need to ensure that the error message displayed in the validation control is also displayed in the
validation summary list.
What should you do.?
A. Add the following code segment to line 06.
Required text in TextBox1
B. Add the following code segment to line 04.
Text="Required text in TextBox1"
C. Add the following code segment to line 04.
ErrorMessage="Required text in TextBox1"
D. Add the following code segment to line 04.
Text="Required text in TextBox1" ErrorMessage="ValidationSummary1"
Answer: C
Microsoft認定資格 70-562認定試験 70-562 70-562 70-562認証試験
NO.15 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create the following controls:
A composite custom control named MyControl.
A templated custom control named OrderFormData.
You write the following code segment to override the method named CreateChildControls() in the
MyControl class. (Line numbers are included for reference only.)
01 protected override void CreateChildControls() {
02 Controls.Clear();
03 OrderFormData oFData = new OrderFormData("OrderForm");
04
05 }
You need to add the OrderFormData control to the MyControl control.
Which code segment should you insert at line 04?
A. Controls.Add(oFData);
B. Template.InstantiateIn(this);
Template.InstantiateIn(oFData);
C. Controls.Add(oFData);
this.Controls.Add(oFData);
D. this.TemplateControl = (TemplateControl)Template;
oFData.TemplateControl = (TemplateControl)Template;
Controls.Add(oFData);
Answer: B
Microsoft練習問題 70-562 70-562認定証
NO.16 You create a Microsoft ASP.NET application by using the Microsoft .NET
Framework version 3.5.
You add a TextBox control named TextBox1.
You write the following code segment for validation.
protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args) {
DateTime dt = String.IsNullOrEmpty(args.Value) ? DateTime.Now :
Convert.ToDateTime(args.Value);
args.IsValid = (DateTime.Now - dt).Days < 10;
}
You need to validate the value of TextBox1.
Which code fragment should you add to the Web page?
A. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
EnableClientScript="false" InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
B. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" ValueToCompare="<%= DateTime.Now; %>">
</asp:CompareValidator>
C. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
D. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" Operator="DataTypeCheck" >
</asp:CompareValidator>
Answer: B
Microsoft認定試験 70-562認定試験 70-562 70-562 70-562練習問題
NO.17 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
When you review the application performance counters, you discover that there is an unexpected
increase in the value of the Application Restarts counter.
You need to identify the reasons for this increase.
What are three possible reasons that could cause this increase? (Each correct answer presents a
complete solution. Choose three.)
A. Restart of the Microsoft IIS 6.0 host.
B. Restart of the Microsoft Windows Server 2003 that hosts the Web application.
C. Addition of a new assembly in the Bin directory of the application.
D. Addition of a code segment that requires recompilation to the ASP.NET Web application.
E. Enabling of HTTP compression in the Microsoft IIS 6.0 manager for the application.
F. Modification to the Web.config file in the system.web section for debugging the application.
Answer: CDF
Microsoft認定資格 70-562 70-562
NO.18 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application must redirect the original URL to a different ASPX page.
You need to ensure that the users cannot view the original URL after the page is executed.
You also need to ensure that each page execution requires only one request from the client browser.
What should you do?
A. Use the Server.Transfer method to transfer execution to the correct ASPX page.
B. Use the Response.Redirect method to transfer execution to the correct ASPX page.
C. Use the HttpContext.Current.RewritePath method to transfer execution to the correct ASPX page.
D. Add the Location: new URL value to the Response.Headers collection. Call the Response.End()
statement. Send the header to the client computer to transfer execution to the correct ASPX page.
Answer: C
Microsoft 70-562問題集 70-562過去問 70-562過去問
NO.19 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment.
<asp:DropDownList AutoPostBack="true" ID="DropDownList1" runat="server"
onselectedindexchanged="DropDownList1_SelectedIndexChanged">
<asp:ListItem>1</asp:ListItem>
<asp:ListItem>2</asp:ListItem>
<asp:ListItem>3</asp:ListItem>
</asp:DropDownList>
You also add a MultiView control named MultiView1 to the Web page. MultiView1 has three child View
controls.
You need to ensure that you can select the View controls by using the DropDownList1 DropDownList
control.
Which code segment should you use?
A. int idx = DropDownList1.SelectedIndex;
MultiView1.ActiveViewIndex = idx;
B. int idx = DropDownList1.SelectedIndex;
MultiView1.Views[idx].Visible = true;
C. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.ActiveViewIndex = idx;
D. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.Views[idx].Visible = true;
Answer: A
Microsoft認定証 70-562 70-562
NO.20 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add the following code fragment to the Web.config file of the application (Line numbers are
includedfor reference only).
01 <healthMonitoring>
02 <providers>
03 <add name="EventLogProvider"
type="System.Web.Management.EventLogWebEventProvider />
04 <add name="WmiWebEventProvider"
type="System.Web.Management.WmiWebEventProvider />
05 </providers>
06 <eventMappings>
07
08 </eventMappings>
09 <rules>
10 <add name="Security Rule" eventName="Security Event" provider="WmiWebEventProvider"
/>
11 <add name="AppError Rule" eventName="AppError Event" provider="EventLogProvider" />
12 </rules>
13 </healthMonitoring>
You need to configure Web Events to meet the following requirements:
Security-related Web Events are mapped to Microsoft Windows Management Instrumentation (WMI)
events.
Web Events caused by problems with configuration or application code are logged into the Windows
Application Event Log.
Which code fragment should you insert at line 07?
A. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
B. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
C. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
D. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
Answer: B
Microsoft 70-562 70-562 70-562練習問題 70-562認定証 70-562練習問題
IT-Passports.comはIT認定試験に関連する資料の専門の提供者として、受験生の皆さんに最も優秀な試験70-562参考書を提供することを目標としています。他のサイトと比較して、IT-Passports.comは皆さんにもっと信頼されています。なぜでしょうか。それはIT-Passports.comは長年の経験を持っていて、ずっとIT認定試験の研究に取り組んでいて、試験についての多くの規則を総括しましたから。そうすると、IT-Passports.comの70-562教材は高い的中率を持つことができます。これはまた試験の合格率を保証します。従って、IT-Passports.comは皆の信頼を得ました。
没有评论:
发表评论