JuniperのJN0-331試験に受かるために一所懸命頑張って勉強していれば、あなたは間違っているのです。もちろん頑張って勉強するのは試験に合格することができますが、望ましい効果を達成できないかもしれません。現在はインターネットの時代で、試験に合格する ショートカットがたくさんあります。IT-Passports.comのJuniperのJN0-331試験トレーニング資料はとても良いトレーニング資料で、あなたが試験に合格することを保証します。この資料は値段が手頃だけでなく、あなたの時間を大量に節約できます。そうしたら、半分の労力で二倍の効果を得ることができます。
IT認定試験の中でどんな試験を受けても、IT-Passports.comのJN0-331試験参考資料はあなたに大きなヘルプを与えることができます。それは IT-Passports.comのJN0-331問題集には実際の試験に出題される可能性がある問題をすべて含んでいて、しかもあなたをよりよく問題を理解させるように詳しい解析を与えますから。真剣にIT-Passports.comのJuniper JN0-331問題集を勉強する限り、受験したい試験に楽に合格することができるということです。
試験番号：JN0-331問題集
試験科目：Juniper 「SEC,Specialist(JNCIS-SEC)」
問題と解答：全131問
IT-Passports.comはあなたが完全に信頼できるウェブサイトです。受験生の皆さんをもっと効率的な参考資料を勉強させるように、IT-Passports.comのIT技術者はずっとさまざまなIT認定試験の研究に取り組んでいますから、もっと多くの素晴らしい資料を開発し出します。一度IT-Passports.comのJN0-331問題集を使用すると、きっと二度目を使用したいです。IT-Passports.comは最高のJN0-331資料を提供するだけでなく、高品質のサービスも提供します。私達の資料についてどんなアドバイスがあってもお気軽に言ってください。受験生の皆さんを試験に合格させることを旨とするだけでなく、皆さんに最高のサービスを提供することも目標としています。
他のたくさんのトレーニング資料より、IT-Passports.comのJuniperのJN0-331試験トレーニング資料は一番良いものです。IT認証のトレーニング資料が必要としたら、IT-Passports.comのJuniperのJN0-331試験トレーニング資料を利用しなければ絶対後悔しますよ。IT-Passports.comのトレーニング資料を選んだら、あなたは一生で利益を受けることができます。
もしあなたはまだJuniperのJN0-331試験に合格するのために悩まればIT-Passports.comは今あなたを助けることができます。IT-Passports.comは高品質の学習資料をあなたを助けて優秀なJuniperのJN0-331会員の認証を得て、もしあなたはJuniper JN0-331の認証試験を通して自分を高めるの選択を下ろして、IT-Passports.comはとてもよい選択だと思います。
IT-Passports.comはきみのIT夢に向かって力になりますよ。JuniperのJN0-331の認証そんなに人気があって、IT-Passports.comも君の試験に合格するために全力で助けてあげて、またあなたを一年の無料なサービスの更新を提供します。明日の成功のためにIT-Passports.comを選らばましょう。
Juniperの認定試験は現在とても人気がある試験ですね。この重要な認証資格をもうすでに手に入れましたか。例えば、もう既にJN0-331認定試験を受験したのですか。もしまだ受験していないなら、はやく行動する必要がありますよ。こんなに大切な資格を取らなくてはいけないです。ここで言いたいのは、どのようにすれば効率的にJN0-331認定試験の準備をして一回で試験に合格できるのかということです。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/JN0-331.html
NO.1 Which two statements about JUNOS Software packet handling are correct? (Choose two.)
A. JUNOS Software applies service ALGs only for the first packet of a flow.
B. JUNOS Software uses fast-path processing only for the first packet of a flow.
C. JUNOS Software performs route and policy lookup only for the first packet of a flow.
D. JUNOS Software applies SCREEN options for both first and consecutive packets of a flow.
Answer: CD
Juniper認定証 JN0-331 JN0-331 JN0-331
NO.2 What are two components of the JUNOS Software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC
Juniper JN0-331 JN0-331
NO.3 Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D
Juniper認定試験 JN0-331 JN0-331 JN0-331 JN0-331
NO.4 Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is
enabled.
Answer: BD
Juniper認証試験 JN0-331認定試験 JN0-331練習問題 JN0-331認定証 JN0-331認定資格
NO.5 By default, which condition would cause a session to be removed from the session table?
A. Route entry for the session changed.
B. Security policy for the session changed.
C. The ARP table entry for the source IP address timed out.
D. No traffic matched the session during the timeout period.
Answer: D
Juniper JN0-331認証試験 JN0-331認定証 JN0-331過去問 JN0-331
NO.6 Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at
the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of
the devices.
Answer: D
Juniper JN0-331認証試験 JN0-331認定証 JN0-331 JN0-331認定証 JN0-331
NO.7 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards
traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router
performs route lookup only for the first packet.
Answer: BC
Juniper過去問 JN0-331 JN0-331参考書
NO.8 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the device itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC
Juniper認定試験 JN0-331 JN0-331
NO.9 Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday
and Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C
Juniper問題集 JN0-331過去問 JN0-331 JN0-331練習問題 JN0-331認定資格
NO.10 Which two functions of JUNOS Software are handled by the data plane? (Choose two.)
A. NAT
B. OSPF
C. SNMP
D. SCREEN options
Answer: AD
Juniper過去問 JN0-331問題集 JN0-331認定試験 JN0-331参考書 JN0-331問題集 JN0-331
NO.11 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections.
How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D
Juniper JN0-331認定証 JN0-331
NO.12 In JUNOS Software, which three packet elements can be inspected to determine if a session already
exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer: ACE
Juniper JN0-331参考書 JN0-331 JN0-331練習問題
NO.13 Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer: ADE
Juniper JN0-331参考書 JN0-331認定証
NO.14 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B
Juniper参考書 JN0-331 JN0-331 JN0-331
NO.15 What is the default session timeout for UDP sessions?
A. 30 seconds
B. 1 minute
C. 5 minutes
D. 30 minutes
Answer: C
Juniper問題集 JN0-331認定証 JN0-331認定資格 JN0-331 JN0-331 JN0-331認定証
NO.16 What is the purpose of a zone in JUNOS Software?
A. A zone defines a group of security devices with a common management.
B. A zone defines the geographic region in which the security device is deployed.
C. A zone defines a group of network segments with similar security requirements.
D. A zone defines a group of network segments with similar class-of-service requirements.
Answer: C
Juniper過去問 JN0-331問題集 JN0-331参考書 JN0-331 JN0-331過去問
NO.17 Which two configurations are valid? (Choose two.)
A. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
security-zone blue {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}
}
B. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
}
security-zone blue {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
C. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}
D. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}
Answer: AD
Juniper認定証 JN0-331認証試験 JN0-331過去問 JN0-331
NO.18 For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer: A
Juniper JN0-331参考書 JN0-331認定証 JN0-331
NO.19 Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D
Juniper JN0-331 JN0-331問題集 JN0-331問題集 JN0-331過去問 JN0-331問題集
NO.20 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure
traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not
separate broadcast domains.
Answer: BC
Juniper認定試験 JN0-331 JN0-331問題集
受験生の皆様にもっと多くの助けを差し上げるために、IT-Passports.com のJuniperのJN0-331トレーニング資料はインターネットであなたの緊張を解消することができます。JN0-331 勉強資料は公式JuniperのJN0-331試験トレーニング授業 、JuniperのJN0-331 自習ガイド、JuniperのJN0-331 の試験と実践やJuniperのJN0-331オンラインテストなどに含まれています。IT-Passports.com がデザインしたJuniperのJN0-331模擬トレーニングパッケージはあなたが楽に試験に合格することを助けます。IT-Passports.comの勉強資料を手に入れたら、指示に従えば JN0-331認定試験に受かることはたやすくなります。
没有评论:
发表评论