評判のAlcatel-Lucent 4A0-101認定試験の問題集

IT-Passports.comを通してAlcatel-Lucent 4A0-101試験に合格することがやすくて、Alcatel-Lucent 4A0-101試験をはじめて受ける方はIT-Passports.comの商品を選んで無料なサンプル（例年の試験問題集と解析）をダウンロードしてから、楽に試験の現場の雰囲気を体験することができます。オンラインにいろいろなAlcatel-Lucent 4A0-101試験集があるですけれども、弊社の商品は一番高品質で低価額で、試験の問題が絶えず切れない更新でテストの内容ともっとも真実と近づいてお客様の合格が保証いたします。それほかに、弊社の商品を選んで、勉強の時間も長くではありません。できるだけ早くAlcatel-Lucent 4A0-101認定試験を通ろう。

近年、IT技術の急速な発展に伴って、IT技術を勉強し始める人がますます多くなっています。そこで、IT業界で働く人も多くなっています。このように、IT業界の競争が一層激しくなります。同様にIT業界で働いていて、IT夢を持っているあなたは、きっと他の人にキャッチアップされ、追い抜かれることを望まないでしょう。それでは、ずっと自分自身のスキルをアップグレードすることが必要になり、他の人に自分の強さを証明する必要があります。では、どうやって自分の能力を証明するのですか。多くの人々はIT認定試験を受験して認証資格を取ることを通して彼らの強さを証明します。あなたもIT認証資格を取りたいですか。まずAlcatel-Lucentの4A0-101認定試験に合格しましょう。これはAlcatel-Lucentの最も重要な試験の一つで、業界全体に認証された資格です。

試験番号：4A0-101問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Interior Routing Protocols and High Availability」
問題と解答：全177問

現在のネットワークの全盛期で、Alcatel-Lucentの4A0-101の認証試験を準備するのにいろいろな方法があります。IT-Passports.comが提供した最も依頼できるトレーニングの問題と解答はあなたが気楽にAlcatel-Lucentの4A0-101の認証試験を受かることに助けを差し上げます。IT-Passports.comにAlcatel-Lucentの4A0-101の試験に関する問題はいくつかの種類がありますから、すべてのIT認証試験の要求を満たすことができます。

Alcatel-Lucentの4A0-101認定試験に受かることを悩んでいたら、IT-Passports.comを選びましょう。IT-Passports.comのAlcatel-Lucentの4A0-101試験トレーニング資料は間違いなく最高のトレーニング資料ですから、それを選ぶことはあなたにとって最高の選択です。IT専門家になりたいですか。そうだったら、IT-Passports.comを利用したください。

IT-Passports.comはIT認定試験を受験した多くの人々を助けました。また、受験生からいろいろな良い評価を得ています。IT-Passports.comの4A0-101問題集の合格率が100%に達することも数え切れない受験生に証明された事実です。もし試験の準備をするために大変を感じているとしたら、ぜひIT-Passports.comの4A0-101問題集を見逃さないでください。これは試験の準備をするために非常に効率的なツールですから。この問題集はあなたが少ない労力で最高の結果を取得することができます。

弊社は君の試験に合格させるとともにまた一年の無料の更新のサービスも提供し、もし試験に失敗したら全額で返金いたします。しかしその可能性はほとんどありません。弊社は100%合格率を保証し、購入前にネットでダウンロードしてください。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-101.html

NO.1 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D

Alcatel-Lucent   4A0-101   4A0-101認定試験   4A0-101

NO.2 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach
the network behind router R2?
A. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2 / 24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/ 24 next-hop 139.120.121.2
Answer: A

Alcatel-Lucent   4A0-101   4A0-101認定試験

NO.3 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B

Alcatel-Lucent認定試験   4A0-101認定資格   4A0-101   4A0-101認証試験   4A0-101

NO.4 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D

Alcatel-Lucent   4A0-101過去問   4A0-101問題集

NO.5 Which of the following statements apply to link state protocol behavior? Choose three
answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C,E

Alcatel-Lucent過去問   4A0-101   4A0-101   4A0-101   4A0-101

NO.6 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2
goes down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of
Hello timeouts. At this point, both routers R1 and R2 re-compute their link state database and send
updates to their adjacent routers. Once the process is complete for all routers, the networks have
converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At
this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information.
At this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link
is down. At this point, both routers R1 and R2 re-compute their link state database and sendupdates
to their adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A

Alcatel-Lucent認定試験   4A0-101   4A0-101認証試験   4A0-101   4A0-101

NO.7 Click the exhibit button.
A static route is created on router R1, using the "static-route 0.0.0.0/ 0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/ 0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C

Alcatel-Lucent   4A0-101   4A0-101認証試験   4A0-101

NO.8 Which of the following commands can be used to display the number of SPF computations
that have been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A

Alcatel-Lucent認定証   4A0-101   4A0-101認証試験   4A0-101

NO.9 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure
router static-route 10.2.3.0/ 24 next-hop 10.1.2.1" command. What is the correct traceroute
command to test this static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A

Alcatel-Lucent問題集   4A0-101過去問   4A0-101   4A0-101認証試験
15. What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B

Alcatel-Lucent   4A0-101認定証   4A0-101   4A0-101認定資格   4A0-101参考書
16. Which of the following statements regarding distance vectors protocols are true? (Choose
two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted
beyond the immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant
routers and how they interconnect
Answer: A,C

Alcatel-Lucent   4A0-101   4A0-101認定試験   4A0-101問題集

NO.10 Static routing will be used in a network between a corporate head office, with many
connected networks, and a branch office, with one connection to the head office. Which of the
following best describes the likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more
specific static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office
router will have a default route.
Answer: D

Alcatel-Lucent認定資格   4A0-101   4A0-101問題集

NO.11 When a router receives an IP packet, but does not find a match in the routing table for the
destination IP address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B

Alcatel-Lucent   4A0-101認定資格   4A0-101   4A0-101練習問題

NO.12 Click the exhibit button.
Routers R1, R2, and R3 are running a classful routing protocol between them. Assuming that router
R1 advertises all directly connected networks, how will these networks be represented in router
R3's routing table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/ 24 and one entry for 10.1.2.0/ 24.
C. The networks will be represented with one entry of 10.0.0.0/ 8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/ 24 in router R3's route table.
Answer: C

Alcatel-Lucent問題集   4A0-101   4A0-101   4A0-101問題集   4A0-101

NO.13 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming
that there are no stub networks, which of the following statements regarding type 4 LSA generation
is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA
that is flooded to area 2.
Answer: D

Alcatel-Lucent   4A0-101   4A0-101認定資格   4A0-101

NO.14 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B

Alcatel-Lucent過去問   4A0-101問題集   4A0-101認定証   4A0-101認定資格

IT-Passports.com のAlcatel-Lucentの4A0-101問題集は１００パーセント検証とテストを通過したもので、認定試験に合格する専門的な指導者です。IT-Passports.com のAlcatel-Lucentの4A0-101練習問題集と解答は実践の検査に合格したソフトウェアで、最も受験生に合うトレーニングツールです。 IT-Passports.comで、あなたは一番良い準備資料を見つけられます。その資料は練習問題と解答に含まれています。弊社の資料があなたに練習を実践に移すチャンスを差し上げ、あなたはぜひAlcatel-Lucentの4A0-101試験に合格して自分の目標を達成できます。

IT-Passports.comはAlcatel-Lucent 4A0-M02試験の実践訓練を提供する

インターネットで高品質かつ最新のAlcatel-Lucentの4A0-M02の試験の資料を提供していると言うサイトがたくさんあります。が、サイトに相関する依頼できる保証が何一つありません。ここで私が言いたいのはIT-Passports.comのコアバリューです。すべてのAlcatel-Lucentの4A0-M02試験は非常に重要ですが、こんな情報技術が急速に発展している時代に、IT-Passports.comはただその中の一つです。では、なぜ受験生たちはほとんどIT-Passports.comを選んだのですか。それはIT-Passports.comが提供した試験問題資料は絶対あなたが試験に合格することを保証しますから。なんでそうやって言ったのはIT-Passports.comが提供した試験問題資料は最新な資料ですから。それも受験生たちが実践を通して証明したことです。

あなたはこのような人々の一人ですか。さまざまな資料とトレーニング授業を前にして、どれを選ぶか本当に困っているのです。もしそうだったら、これ以上困ることはないです。IT-Passports.comはあなたにとって最も正確な選択ですから。我々はあなたに試験問題と解答に含まれている全面的な試験資料を提供することができます。IT-Passports.comの解答は最も正確な解釈ですから、あなたがより良い知識を身につけることに助けになれます。IT-Passports.comを利用したら、Alcatel-Lucentの4A0-M02認定試験に受かることを信じています。それも我々が全てのお客様に対する約束です。

IT認証試験に合格したい受験生の皆さんはきっと試験の準備をするために大変悩んでいるでしょう。しかし準備しなければならないのですから、落ち着かない心理になりました。しかし、IT-Passports.comのAlcatel-Lucentの4A0-M02トレーニング資料を利用してから、その落ち着かない心はなくなった人がたくさんいます。IT-Passports.comのAlcatel-Lucentの4A0-M02トレーニング資料を持っていたら、自信を持つようになります。試験に合格しない心配する必要がないですから、気楽に試験を受けることができます。これは心のヘルプだけではなく、試験に合格することで、明るい明日を持つこともできるようになります。

Alcatel-Lucentの4A0-M02認定試験は現在で本当に人気がある試験ですね。まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。では、まだ試験に合格するショートカットがわからないあなたは、受験のテクニックを知りたいですか。今教えてあげますよ。IT-Passports.comの4A0-M02問題集を利用することです。

IT-Passports.comは高品質の製品を提供するだけではなく、完全なアフターサービスも提供します。当社の製品を利用したら、一年間の無料更新サービスを提供します。しかも、速いスピードで受験生の皆様に提供して差し上げます。あなたがいつでも最新の試験資料を持っていることを保証します。

試験番号：4A0-M02問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Mobile Gateways for the LTE Evolved Packet Core 」
問題と解答：全140問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-M02.html

NO.1 A UE needs to get an IP address before it can communicate to any PDN over the LTE network. Which of
the following statements are FALSE regarding the process of the IP address allocation? (Choose two)
A. A PGW may obtain an IP address from a RADIUS server and assign it to the UE.
B. A PGW may assign the IP address from its local address pools.
C. An SGW may obtain a static IP address from the HSS server and assign it to the UE.
D. An SGW may obtain an IP address from a RADIUS server and assign it to the UE.
E. A PGW may obtain an IP address from a DHCP server and assign it to the UE.
Answer: C,D

Alcatel-Lucent参考書   4A0-M02認定試験   4A0-M02   4A0-M02問題集

NO.2 Which of the following statements is FALSE regarding the S1-MME interface?
A. It is the control plane interface between the E-UTRAN and the MME.
B. It is used to signal the TEIDs for the S1 bearers between the eNodeB and the SGW.
C. The eNodeB receives the Paging messages over the S1-MME interface.
D. It is used for the management of the Radio Access Bearers.
E. It is based on the IP/UDP protocols.
Answer: E

Alcatel-Lucent   4A0-M02認定資格   4A0-M02認定試験

NO.3 Based on the information shown in the exhibit, when the SGW receives an IP packet from the UE,
which of the following is the GTP TEID value expected to be received in the GTP packet header?
A. 0xd05025
B. 0x4b00805
C. 0x21
D. 0x4b00825
E. None of the above answers are correct.
Answer: D

Alcatel-Lucent認定試験   4A0-M02練習問題   4A0-M02認定資格   4A0-M02

NO.4 Which of the following statements is FALSE regarding the Tracking Area (TA)?
A. A TA is a set of eNodeBs that are defined by a UE itself.
B. A TA is the smallest geographical area in which a UE can roam without performing a Tracking Area
Update (TAU) other than periodic TAU as required.
C. A Tracking Area Identity (TAI) is used to identify each tracking area.
D. The Tracking Area Identity (TAI) is assigned by the service provider.
E. One TA may be served by one or more than one MME.
Answer: A

Alcatel-Lucent   4A0-M02   4A0-M02認定証   4A0-M02認証試験

NO.5 Which of the following most accurately describes the messages used to manage a Diameter
connection path?
A. The Capabilities-Exchange message
B. The Device-Watchdog message
C. The Credit-Control message
D. The Disconnect-Peer message
E. All of the above answers are correct
F. Only answers A, B and D are correct
Answer: F

Alcatel-Lucent   4A0-M02   4A0-M02

NO.6 Which of the following LTE interfaces are used for the communication of user data? (Choose one best
answer)
A. The S1-MME interface and the S11 interface.
B. The S1-U interface.
C. The S5 interface.
D. The S1-U interface, the S5 interface and the LTE-Uu interface.
E. Only answers A, B and C are correct.
F. Only answers B and C are correct.
Answer: D

Alcatel-Lucent   4A0-M02問題集   4A0-M02練習問題   4A0-M02   4A0-M02問題集

NO.7 Which of the following statements is TRUE regarding the IP connectivity between a UE and a PDN?
A. A UE gets an IPv4 address and/or an IPv6 prefix per APN.
B. A PGW forwards the UE's IP packets to the PDN based on the address of the PDN server.
C. When a UE sends an IP packet to a PDN over the EPC core, the eNodeB forwards
theencapsulatedpacket to the SGW by looking into its IP routing table to determine how to reach the PDN
server.
D. The SGW forwards the UE's IP packets to the PGW based on the address of the PDN server.
E. Only answers C and D are correct.
F. Only answers A and B are correct.
Answer: F

Alcatel-Lucent参考書   4A0-M02   4A0-M02

NO.8 There is an active GTP path between an Alcatel-Lucent SGW and an Alcatel-Lucent PGW, On the
SGW. Which of the following CLI commands is used to check the "Restart Count" value of the PGW?
A. show mobile-gateway serving ref-point-peers s5
B. show mobile-gateway serving ref-point-stats s5
C. show mobile-gateway serving bearer-stats s5
D. show mobile-gateway serving path-mgmt-stats s5
E. None of the above answers are correct.
Answer: D

Alcatel-Lucent認定証   4A0-M02   4A0-M02認証試験   4A0-M02参考書

NO.9 Which of the following statements is FALSE regarding the UE network attachment procedure?
A. The UE is served by an eNodeB.
B. The eNodeB selects one MME to serve the UE.
C. The MME selects one SGW to serve the UE.
D. The SGW selects one PGW to serve the UE
E. The PGW selects one PCRF server if required.
Answer: D

Alcatel-Lucent   4A0-M02   4A0-M02認定証   4A0-M02認定試験   4A0-M02認定資格

NO.10 Which of the following statements is FALSE regarding the UE paging process?
A. The SGW performs downlink data buffering while the S1 bearer is being established.
B. The SGW initiates the paging messages towards the UE.
C. The PGW is not aware of the paging process.
D. The UE initiates the service request procedure once it receives the paging message.
E. The paging procedure is controlled by the MME.
Answer: B

Alcatel-Lucent   4A0-M02認証試験   4A0-M02   4A0-M02   4A0-M02認定試験   4A0-M02

NO.11 Based on the information shown in the exhibit, which of the following is the PLMN ID?
A. 302
B. 720
C. 123456789
D. 9876543
E. 30201613
F. 302720
Answer: F

Alcatel-Lucent練習問題   4A0-M02   4A0-M02認証試験   4A0-M02   4A0-M02

NO.12 Which of the following statements is FALSE regarding the eNodeB?
A. The eNodeBs maybeinterconnectTEIDwith each other via anX2 interface.
B. The eNodeB is an element of the EPC core.
C. The eNodeBs areconnectedto the EPC core via the S1 interface.
D. During an IMSI attach, the eNodeB selects an MME to service the UE.
E. The eNodeB performs the compression and encryption of the user data stream.
Answer: B

Alcatel-Lucent認定試験   4A0-M02練習問題   4A0-M02   4A0-M02過去問   4A0-M02認定証

NO.13 Which of the following most accurately identifies a GTP tunnel on the Alcatel-Lucent 7750 MG by
default?
A. ATEID
B. The System IP address
C. A UDP port number
D. ATEIDand the System IP address
E. ATEID, the System IP address and a UDP port number
Answer: E

Alcatel-Lucent認定証   4A0-M02認定試験   4A0-M02認定資格

NO.14 Which of the following statements most accurately describes the MME?
A. The MME selects the SGW and the PGW for a given UE.
B. The MME is responsible for the bearer management.
C. The MME communicates with both the E-UTRAN and the EPC via GTP-C tunnels.
D. The MME performs the user authentication and authorization using the information provided by the
HSS
E. All of the above answers are correct.
F. Only answers A, B and D are correct.
Answer: F

Alcatel-Lucent   4A0-M02   4A0-M02認定試験   4A0-M02

NO.15 An Alcatel-Lucent SGW is only connected to an Alcatel-Lucent PGW. Based on the information shown
in the exhibit, how many GTP-C tunnels are established between the SGW and the PGW?
A. 1
B. 2
C. 3
D. 4
E. 6
Answer: E

Alcatel-Lucent参考書   4A0-M02   4A0-M02   4A0-M02認証試験   4A0-M02問題集

NO.16 Which of the following statements is FALSE regarding the EPS bearers?
A. The default bearer isinitiatedby either the UE or the PCRF.
B. The default bearer is always the first bearer established to an APN.
C. An AF server may initiate adedicatedbearer to a UE.
D. EPS bearers that connect a given UE to a single PGW may use different IP subnets.
E. The default bearer remains active throughout the lifetime of the APN connection.
Answer: A

Alcatel-Lucent認証試験   4A0-M02過去問   4A0-M02

NO.17 Which of the following statements most accurately describes the Diameter protocol?
A. The Diameter is a peer-to-peer protocol that uses the TCP or SCTP as the transport protocol.
B. A Diameter peer could act as a Diameter client or a Diameter server to its remote peer.
C. The Alcatel-Lucent 7750 PGW acts as a Diameter client to the PCRF server via the Gx interface.
D. The Diameter protocol uses TCP and SCTP port number 3868.
E. All of the above answers are correct.
F. Only answers A and B are correct.
Answer: E

Alcatel-Lucent認定試験   4A0-M02練習問題   4A0-M02

NO.18 The S5 is the interface used for the communication between the SGW and the PGW. Which of the
following transport protocols is used by this interface?
A. GTP/TCP
B. GTP/UDP
C. GTP/IP
D. GTP/SCTP
E. None of the above answers are correct
Answer: B

Alcatel-Lucent認定証   4A0-M02   4A0-M02   4A0-M02

NO.19 In a 3G network, which of the following is used to build a PDP context between a UE and the GGSN
when a direct tunnel is not used?
A. An end-to-end GTP tunnel between the UE and the GGSN.
B. A Radio Access Bearer between the UE and the NodeB and a GTP tunnel between the NodeB and the
GGSN.
C. A Radio Access Bearer between the UE and the SGSN and a GTP tunnel between the SGSN and the
GGSN.
D. A Radio Access Bearer between the UE and the SGSN.
E. None of the above answers are correct.
Answer: C

Alcatel-Lucent   4A0-M02過去問   4A0-M02   4A0-M02認証試験   4A0-M02練習問題

NO.20 Which of the following interfaces is not using the GTP-C protocol?
A. The X2 interface.
B. The S1-U interface.
C. The S4 interface.
D. The S5 interface.
E. The SGi interface.
Answer: E

Alcatel-Lucent認定証   4A0-M02   4A0-M02認証試験   4A0-M02

Alcatel-Lucentの4A0-M02認証試験のために少ないお金でよい成果を取られるのIT-Passports.comのは最良の選択でございます。IT-Passports.comは例年試験内容を提供したあなたに後悔しないように価値があるサイトだけではなく、無料の一年更新サービスも提供するに最も賢明な選択でございます。

Alcatel-Lucentの4A0-107認定試験の一番新しい問題集の登場

Alcatel-Lucentの4A0-107は専門知識と情報技術の検査として認証試験で、IT-Passports.comはあなたに一日早くAlcatel-Lucentの認証試験に合格させて、多くの人が大量の時間とエネルギーを費やしても無駄になりました。IT-Passports.comにその問題が心配でなく、わずか20時間と少ないお金をを使って楽に試験に合格することができます。IT-Passports.comは君に対して特別の訓練を提供しています。

IT-Passports.comは専門的な、受験生の皆さんを対象とした最も先進的なAlcatel-Lucentの4A0-107試験の認証資料を提供しているサイトです。IT-Passports.comを利用したら、Alcatel-Lucentの4A0-107試験に合格するのを心配することはないです。

今の多士済々な社会の中で、IT専門人士はとても人気がありますが、競争も大きいです。だからいろいろな方は試験を借って、自分の社会の地位を固めたいです。4A0-107認定試験はAlcatel-Lucentの中に重要な認証試験の一つですが、IT-Passports.comにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってAlcatel-Lucent 4A0-107認証試験に参加する方に対して問題集を研究続けています。　

試験番号：4A0-107問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Quality of Service」
問題と解答：全100問

今の競争の激しいIT業界ではAlcatel-Lucentの4A0-107試験にパスした方はメリットがおおくなります。給料もほかの人と比べて高くて仕事の内容も豊富です。でも、この試験はそれほど簡単ではありません。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-107.html

NO.1 Which of the following are characteristics of 802.1p? (Choose two)
A. 802.1p adds 16 bits to the Layer 2 header,
B. 802.1p adds 16 bits to the Layer 3 header.
C. 802.1p specifies 64 different priority levels.
D. 802.1p uses a field in the 802.1Q header.
E. 802.1p uses a field in the Layer 3 IP header
F. 802.1p defines a 3-bit Class of Service field.
Answer: D,F

Alcatel-Lucent   4A0-107   4A0-107認定資格   4A0-107問題集

NO.2 Click the exhibit button below.
Based on the configuration shown below, name the forwarding class to be associated with a TCP packet
encapsulated inside an Ethernet frame that arrives on SAP 1/1/5 with the following characteristics:
Destination IP address = 120.110.1.1
TCP port number = 23
DSCP value = nc1
Dot1pvalue = 3
A. H2
B. NC
C. L2
D. EF
E. H1
F. BE
Answer: C

Alcatel-Lucent認定資格   4A0-107   4A0-107   4A0-107参考書   4A0-107過去問   4A0-107過去問

NO.3 Which of the following BEST describes a SAP when regarding QoS?
A. A point in the network where EXP bits can be mapped to one of eight predefined FCs, each one with its
own queue.
B. A logical point in a service tunnel where all of customer traffic is aggregated.
C. A point at which the initial classification of customer traffic occurs.
D. A point in the network where QoS parameters are discarded in favor of lower-level hardware queuing
functions, such as LLI (Link Layer Interleave).
E. A point in the network where traffic flows from multiple different services are queued together, based on
forwarding class.
Answer: C

Alcatel-Lucent   4A0-107問題集   4A0-107   4A0-107練習問題

NO.4 What is an SLA? (Choose two)
A. An SLA is used to provide automated, real-time testing and alarming for throughput, latency, and jitter
across a provider's network.
B. An SLA is an agreement between a customer and a provider that dictates the treatment of customer
traffic across the provider's network.
C. An SLA allows customers to control all traffic within the service provider's network by prioritizing their
traffic over others as desired.
D. An SLA allows a customer to pre-mark traffic and ensure that traffic is treated as per the agreement
within the provider's network.
E. An SLA is a standard set of network QoS policies that a provider shares to all its customers, allowing
them to better understand the treatment of traffic within the provider's network.
Answer: B,D

Alcatel-Lucent   4A0-107   4A0-107

NO.5 Which of the following are characteristics of DSCP? (Choose two)
A. DSCP is part of the Layer 3 header.
B. DSCP is a 6-bit field.
C. DSCP specifies eight different priorities.
D. DSCP specifies four precedence levels.
E. DSCP is part of the Layer 2 header
F. DSCP specifies 128 different per-hop behaviors.
Answer: A,B

Alcatel-Lucent練習問題   4A0-107過去問   4A0-107練習問題

NO.6 Which of the following statements regarding DSCP bits are TRUE? (Choose three)
A. The three most significant (first) bits define 8 forwarding classes.
B. The three least significant (last) bits of the DSCP specify the drop probability.
C. The full 8 bits of the TOS field are used for DSCP.
D. To convert DSCP to IP precedence, the three most significant (first) bits are matched.
E. DSCP provides for eight drop probabilities.
Answer: A,B,D

Alcatel-Lucent   4A0-107練習問題   4A0-107認定試験   4A0-107練習問題

NO.7 Which of the following are possible criteria for classifying packets at the network port ingress on the
Alcatel-Lucent 7750 SR? (Choose three)
A. The EXP bits in the MPLS header.
B. The packet's source and destination IP addresses.
C. The packet's DSCP bits.
D. The dot1p bits in the frame header.
E. The ID of an SDP that is transporting the packet.
Answer: A,C,D

Alcatel-Lucent参考書   4A0-107   4A0-107認定試験   4A0-107認証試験   4A0-107参考書

NO.8 Which of the following are examples of metrics for QoS.?
A. Signal degradation, attenuation, line loss
B. Latency, FIFO, WRED
C. Delay, jitter, packet loss
D. SNR, queue depth, latency
E. Attenuation, dispersion, latency
Answer: C

Alcatel-Lucent   4A0-107   4A0-107認定試験

NO.9 Individual application streams are considered microflows, whereas __________ are considered
macroflows.
A. SAPs
B. SDPs
C. Services
D. Queues
E. Schedulers
F. Forwarding classes
Answer: F

Alcatel-Lucent   4A0-107認証試験   4A0-107過去問   4A0-107   4A0-107   4A0-107

NO.10 Which of the following are major components of QoS functionality on the Alcatel-Lucent 7750 SR?
(Choose three)
A. Microflow reservations using RSVP
B. DSCP to EXP translation
C. Traffic classification
D. Automatic profiling and policy configuration
E. Buffer memory management
F. Traffic scheduling
Answer: C,E,F

Alcatel-Lucent   4A0-107認定資格   4A0-107   4A0-107

NO.11 What is the 6-bit binary representation of DSCP value AF21?
A. 010011
B. 100010
C. 010001
D. 001100
E. 010010
Answer: E

Alcatel-Lucent過去問   4A0-107練習問題   4A0-107認定試験

NO.12 What is the maximum number of SAP-ingress policies that can be applied on a SAP?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 8
Answer: A

Alcatel-Lucent   4A0-107   4A0-107練習問題   4A0-107   4A0-107

NO.13 The IP ToS field consists of ________ bits, of which ________are used. The _________most significant
(first) bits define precedence.
A. 8, 6, 3
B. 8, 8, 6
C. 16, 8, 4
D. 8, 6, 4
E. 24, 16, 8
Answer: A

Alcatel-Lucent問題集   4A0-107問題集   4A0-107認定資格   4A0-107練習問題   4A0-107認定試験

NO.14 How many bits does DSCP use to provide QoS marking options?
A. 8
B. 16
C. 6
D. 4
E. 3
Answer: C

Alcatel-Lucent練習問題   4A0-107認定証   4A0-107認証試験

NO.15 Which of the following can be used as classifiers of customer traffic? (Choose three)
A. DSCP value
B. 802.1p value
C. IP DF bit
D. TCP/UDP port numbers
E. HTML version number
Answer: A,B,D

Alcatel-Lucent   4A0-107   4A0-107参考書

IT-Passports.comを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。IT-Passports.comはAlcatel-Lucent 4A0-107認証試験を助けって通じての最良の選択で、１００％のAlcatel-Lucent 4A0-107認証試験合格率のはIT-Passports.com最高の保証でございます。君が選んだのはIT-Passports.com、成功を選択したのに等しいです。

Alcatel-Lucent 4A0-M01認定試験を受験したければコレを選べ

あなたのAlcatel-Lucentの4A0-M01認証試験に合格させるのはIT-Passports.comが賢明な選択で購入する前にインターネットで無料な問題集をダウンロードしてください。そうしたらあなたがAlcatel-Lucentの4A0-M01認定試験にもっと自信を増加して、もし失敗したら、全額で返金いたします。

IT-Passports.comは最高な品質で最速なスピードでAlcatel-Lucentの4A0-M01認定試験の資料を更新するサイトでございます。もしかすると君はほかのサイトもAlcatel-Lucentの4A0-M01認証試験に関する資料があるのを見つけた、比較したらIT-Passports.comが提供したのがいちばん全面的で品質が最高なことがわかりました。

Alcatel-Lucentの4A0-M01認証試験のために少ないお金でよい成果を取られるのIT-Passports.comのは最良の選択でございます。IT-Passports.comは例年試験内容を提供したあなたに後悔しないように価値があるサイトだけではなく、無料の一年更新サービスも提供するに最も賢明な選択でございます。

適切なトレーニングを選ぶのは成功の保証になれますが、何を選ぶのは非常に重要なことです。IT-Passports.comはとても人気がありますから、それを選ばない理由はないです。もちろん、完璧なトレーニング資料を差し上げましたが、もしあなたに向いていないのなら無用になりますから、IT-Passports.comを利用する前に、一部の問題と解答を無料にダウンロードしてみることができます。そうしたら、完全な試験準備をして、気楽に試験を受かることができるようになります。それも何千何万の受験生がIT-Passports.comを選んだ重要な理由です。IT-Passports.comは一番よい、一番実用的な、一番完全な試験トレーニング資料を提供していますから、受験生たちが試験を準備することに意重要な助けになります。

試験番号：4A0-M01問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent IP/MPLS Mobile Backhaul Transport」
問題と解答：全150問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-M01.html

NO.1 Which synchronization technique supports time of day and phase synchronization?
A. IEEE 1588 v2/Precision Time Protocol (PTP)v2
B. Adaptive Clock Recovery (ACR)
C. Time Division Multiplexing (TDM) line timing
D. Synchronization Ethernet (SyncE)/Synchronization Status Message (SSM)
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01認証試験   4A0-M01   4A0-M01

NO.2 An SROS router obtains its timing exclusively from its BITS input port. The router sets Quality Level
(QL) SONET Traceability Unknown (STU) on this Superframe (SF) framed DS1 BITS reference.
What must you configure on this master router to pass the best clock quality level to the downstream
Synchronous Ethernet (SyncE) slave nodes while maintaining traceability to the DS1 source?
A. Enable "ql-override prs" on the BITS reference
B. Enable "ql-override prs" on the master's SyncE ports
C. Enable "ql-selection prs" on the BITS reference
D. Set the master router to choose its source by quality level
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01認定証   4A0-M01

NO.3 Which is a characteristic of the IEEE 802.3 Slow Protocol?
A. There are a maximum of 10 frames transmitted per second
B. There are a maximum of 20 slow protocol subtypes per interface
C. The maximum slow protocol frame size is 64 bytes
D. The slow protocol header carries the clock quality level
Answer: A

Alcatel-Lucent   4A0-M01認定証   4A0-M01   4A0-M01認定証   4A0-M01

NO.4 Click on the exhibit.
On the OC-3 port, each provisioned channel group contains all available timeslots
The command result illustrates which OC-3 port characteristic?
A. On STS1-1,the second VT1.5 in the second VTG is set for IPCP encapsulation
B. On STS1-1,the second DS1 channel group in the second VTG isoperationallyup
C. On STS1-1, the second E1 channel group in the second TUG-2 is operationally up
D. On STS1-1, the second VT2 in the second TUG-2 is set for IPCP encapsulation
Answer: C

Alcatel-Lucent   4A0-M01   4A0-M01認定資格   4A0-M01

NO.5 In the Alcatel-Lucent SROS, which payload type set in a SDH-framed OC-12 port creates individual E1
containers?
A. Virtual Tributary (VT) 1.5
B. VT2
C. Virtual Container (VC)-11
D. VC-12
Answer: B

Alcatel-Lucent過去問   4A0-M01練習問題   4A0-M01   4A0-M01

NO.6 Click on the exhibit.
Given the following:
On the OC-3 port, each provisioned channel group contains all available timeslots.
The command result illustrates which circuit status?
A. The E1 channel group is administratively turned down
B. The DS1 circuit physical link is operationally down
C. The IMA bundle has no operational member links
D. The associated Layer 3 interface is operationallydown
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01認定資格

NO.7 If an IEEE 1588v2/Precision Time Protocol (PTP) v2 slave times out announce messages with the
master, to which state does the slave port transition to choose another potential master?
A. Initial
B. Listening
C. Passive
D. Un-calibrated
Answer: B

Alcatel-Lucent認定試験   4A0-M01認定試験   4A0-M01   4A0-M01過去問

NO.8 In the Alcatel-Lucent SROS, which command creates the OC-3 path's Administrative Unit (AU)-4 Virtual
Container (VC) capacity?
A. configure port 3/1/2 sonet-sdh path au-4
B. configure port 3/1/2 sonet-sdh path sts3
C. configure port 3/1/2 sonet-sdh path tug-3
D. configure port 3/1/2 sonet-sdh path vc-4
Answer: B

Alcatel-Lucent過去問   4A0-M01参考書   4A0-M01過去問   4A0-M01   4A0-M01

NO.9 Which timing technique can deliver time of day and phase synchronization information to the base
station without concern for Packet Delay Variation (PDV)?
A. Building Integrated Timing Supply (BITS)
B. Global Positioning System (GPS)
C. Adaptive Clock Recovery (ACR)
D. IEEE 1588v2/Precision Time Protocol (PTP)
Answer: B

Alcatel-Lucent認定資格   4A0-M01   4A0-M01問題集   4A0-M01

NO.10 When researching carrier-class Ethernet standards to support the mobile backhaul Ethernet transport,
which standards body would you consult?
A. IEEE
B. MEF
C. ITU-T
D. NGMN
Answer: B

Alcatel-Lucent認定資格   4A0-M01認証試験   4A0-M01   4A0-M01練習問題   4A0-M01認定証

NO.11 Click on the exhibit.
Given the configuration shown and the following conditions:
* The external reference is offline
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
Which quality level will the SAR router advertise to its Synchronous Ethernet (SyncE) peers?
A. QL-DNU
B. QL-EEC1
C. QL-SSU-A
D. QL-PRC
E. QL-UNC
Answer: B

Alcatel-Lucent練習問題   4A0-M01   4A0-M01   4A0-M01認定資格

NO.12 Which messages, periodically sent between an IEEE 1588v2/Precision Time Protocol (PTP) v2 master
and slave, serve as hellos to help the slave choose the best available master?
A. Announce
B. Announce_grant
C. Sync
D. Delay_response
Answer: A

Alcatel-Lucent過去問   4A0-M01参考書   4A0-M01   4A0-M01問題集

NO.13 Which statement correctly describes the Point-to-Point (PPP) Multilink Protocol (MP) negotiation
process?
A. At least one link must complete Link Control Protocol (LCP) negotiations before the bundle can
initialize
B. The endpoints indicate their desire to implement MP in the link Network Control Protocol (NCP) phase
C. The bundle must complete LCP negotiations before it can enter the NCP negotiation phase
D. Internet Protocol-Control Protocol (IPCP) negotiations must succeed for the bundle links to initialize
Answer: A

Alcatel-Lucent参考書   4A0-M01   4A0-M01認定資格

NO.14 Which statement best describes adaptive timing techniques?
A. Adaptive timing calculates the time of day from time stamped packets
B. Adaptive timing calculates the time of day from the arriving packet rate
C. Adaptive timing only supports frequency synchronization
D. Adaptive timing only operates on point-to-point links
Answer: A

Alcatel-Lucent   4A0-M01認定試験   4A0-M01

NO.15 The IETF is know for which standardization effort.?
A. It develops recommendations for core network functionality, broadband service delivery and next
generation services
B. It maintains Requests for Comment (RFC) that describe technical solutions to Internet challenges
C. It creates single, integrated network design guidelines to support mobile broadband services
D. It develops radio access services and systems for high capacity mobile networks
Answer: B

Alcatel-Lucent   4A0-M01問題集   4A0-M01   4A0-M01   4A0-M01   4A0-M01参考書

NO.16 Click on the exhibit.
The command result indicates which condition on the Inverse Multiplexing over ATM (IMA) bundle?
A. The number of active links has dropped belowthe minimum threshold
B. The associated Layer 3 interface is administratively down
C. The remote IMA bundle is administrativelydown
D. The parent OC-3 is operationally down
Answer: C

Alcatel-Lucent認証試験   4A0-M01練習問題   4A0-M01認定証

NO.17 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
-MLS1 delivers the PRC traceable clock to the network
-Reference 1 receives Quality Level (QL) - ST3
-Reference 2 receives QL - DUS
-BITS sets QL-STU
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC2
B. QL-PRS
C. QL-ST3
D. QL-STU
Answer: C

Alcatel-Lucent認定証   4A0-M01問題集   4A0-M01   4A0-M01

NO.18 Click on the exhibit.
Given the show command results shown:
Which IEEE 1588v2/Precision Time Protocol (PTP) v2 parent clock value does the slave first consider
when choosing its master?
A. GM Clock Priority1
B. GM Clock ID
C. GM Clock Priority2
D. GM Clock Class
Answer: D

Alcatel-Lucent過去問   4A0-M01   4A0-M01参考書   4A0-M01

NO.19 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
* MLS1 delivers the PRC traceable clock to the network
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
* BITS sets QL-SSU-B
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC1
B. QL-PRC
C. QL-SSU-A
D. QL-STU
Answer: B

Alcatel-Lucent練習問題   4A0-M01認定試験   4A0-M01   4A0-M01問題集

NO.20 Click on the exhibit.
Given the show command results shown:
With what IEEE 1588v2/Precision Time Protocol (PTP) v2 message did the slave node set the Unicast
message rates used by the master?
A. Announce granted
B. Announce request
C. Sync granted
D. Sync request
Answer: B

Alcatel-Lucent認定試験   4A0-M01   4A0-M01認定試験   4A0-M01過去問

IT-Passports.comは実環境であなたの本当のAlcatel-Lucent 4A0-M01試験に準備するプロセスを見つけられます。もしあなたが初心者だったら、または自分の知識や専門的なスキルを高めたいのなら、IT-Passports.comのAlcatel-Lucentの4A0-M01問題集があなたを助けることができ、一歩一歩でその念願を実現することにヘルプを差し上げます。IT-Passports.comのAlcatel-Lucentの4A0-M01は試験に関する全ての質問が解決して差し上げられます。それに一年間の無料更新サービスを提供しますから、IT-Passports.comのウェブサイトをご覧ください。

高い評価を持つAlcatel-Lucent 4A0-103認定試験に関連する問題集

IT-Passports.comがもっと早くAlcatel-Lucentの4A0-103認証試験に合格させるサイトで、Alcatel-Lucentの4A0-103認証試験についての問題集が市場にどんどん湧いてきます。IT-Passports.comを選択したら、成功をとりましょう。

チャンスは常に準備ができあがった者に属します。しかし、我々に属する成功の機会が来たとき、それをつかむことができましたか。Alcatel-Lucentの4A0-103認定試験を受験するために準備をしているあなたは、IT-Passports.comという成功できるチャンスを掴みましたか。IT-Passports.comの4A0-103問題集はあなたが楽に試験に合格する保障です。この問題集は大量な時間を節約させ、効率的に試験に準備させることができます。IT-Passports.comの練習資料を利用すれば、あなたはこの資料の特別と素晴らしさをはっきり感じることができます。この問題集は間違いなくあなたの成功への近道で、あなたが十分に4A0-103試験を準備させます。

IT-Passports.comのAlcatel-Lucentの4A0-103試験トレーニング資料の知名度が非常に高いことを皆はよく知っています。IT-Passports.com は世界的によく知られているサイトです。どうしてこのような大きな連鎖反応になりましたか。それはIT-Passports.comのAlcatel-Lucentの4A0-103試験トレーニング資料は適用性が高いもので、本当にみなさんが良い成績を取ることを助けられるからです。

当面の実際のテストを一致させるために、IT-Passports.comのAlcatel-Lucentの4A0-103問題集の技術者はずべての変化によって常に問題と解答をアップデートしています。それに我々はいつもユーザーからのフィードバックを受け付け、アドバイスの一部をフルに活用していますから、完璧なIT-Passports.comのAlcatel-Lucentの4A0-103問題集を取得しました。IT-Passports.comはそれを通じていつまでも最高の品質を持っています。

試験番号：4A0-103問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Multiprotocol Label Switching」
問題と解答：全98問

IT-Passports.comはIT認定試験の4A0-103問題集を提供して皆さんを助けるウエブサイトです。IT-Passports.comは先輩の経験を生かして暦年の試験の材料を編集することを通して、最高の4A0-103問題集を作成しました。問題集に含まれているものは実際試験の問題を全部カバーすることができますから、あなたが一回で成功することを保証できます。

IT-Passports.comのIT専門家たちは彼らの豊富な知識と経験を活かして最新の短期で成果を取るトレーニング方法を研究しました。このトレーニング方法は受験生の皆さんに短い時間で予期の成果を取らせます。特に仕事しながら勉強している受験生たちにとって不可欠なツールです。IT-Passports.comトレーニング資料を選んだら、あなたは自分の夢を実現できます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-103.html

NO.1 What is the significance of receiving a packet with the bottom MPLS label S bit set to 1?
A. It results in forwarding based on the next packet header.
B. It indicates that the label is the bottom of the MPLS label stack.
C. It indicates that the label is the top of the MPLS label stack.
D. Any LSR that receives an S bit set to 1 must discard the packet.
Answer: B

Alcatel-Lucent   4A0-103   4A0-103

NO.2 Which of the following statements best describes downstream unsolicited label distribution?
A. An LER may answer requests for label mappings immediately, without waiting for a label mapping from
the next-hop.
B. An LER may advertise label mappings to all peers for which it might be a next-hop for a given FEC.
C. An LER propagates a label mapping downstream for a FEC. only if it has a label mapping for the FEC
next-hop.
D. An LER will only distribute a label for a FEC when it has been requested to do so.
Answer: B

Alcatel-Lucent   4A0-103認証試験   4A0-103   4A0-103参考書   4A0-103認定資格

NO.3 Router R3 signals an LSP, reserving 1Gbps bandwidth on a 10Gbps link. RSVP configuration limits
reservable bandwidth to 20 percent on the egress interface. Which of the following statements is true?
A. The egress RSVP interface has 80 percent bandwidth unreserved.
B. LSPs can reserve an additional 9.9 Gbps bandwidth on this RSVP interface.
C. The head end reserves 100Mbps for the LSP
D. The egress RSVP interface has 1 Gbps bandwidth unreserved.
Answer: D

Alcatel-Lucent   4A0-103認証試験   4A0-103

NO.4 Click on the exhibit button below.
Given the output below, which of the following statements are true? (Choose three)
A. A packet arriving with label 131066 and destined for prefix 10.10.10.243/32 will be forwarded out
interface 1/1/4, with label 131070.
B. LDP ECMP is enabled.
C. The router ¯ s sys t e m add r ess i s 10 . 10 . 10 . 242 / 32 .
D. There are multiple LSPs to reach FEC 10.10.10.244/32.
E. The router cannot receive any unlabeled packets destined for prefix 10.10.10 223/32.
Answer: A,B,D

Alcatel-Lucent認定証   4A0-103   4A0-103参考書   4A0-103練習問題

NO.5 During node protection signaling, the PLR knows the address of the MP from which of the following
methods?
A. The PLR issues a RSVP path message to the destination router to request the address of the MP.
B. The PLR learns the address of the MP from the ERO.
C. The PLR learns the address of the MP from the RRO
D. The PLR learns the address of the MP from the targeted RSVP hello message.
E. The PLR does not need to know the address of the MP.
Answer: C

Alcatel-Lucent参考書   4A0-103   4A0-103

NO.6 Which of the following statements regarding LSP path configuration are true? (Choose three)
A. The path must include at least one hop.
B. The path may be used multiple times in a single LSP.
C. The path may comprise loose hop entries only.
D. The path must define the LSP's tail end.
E. The path may be used for multiple LSPs.
Answer: C,E

Alcatel-Lucent   4A0-103練習問題   4A0-103認定試験   4A0-103

NO.7 Click on the exhibit button below.
With fast reroute enabled, and given the following:
-Two protected LSPs with the path R1-R2-R3
-Both LSPs enable facility bypass and link protection.
When router R1 is the PLR, which router becomes the MP?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Answer: B

Alcatel-Lucent   4A0-103認定証   4A0-103認定証   4A0-103認証試験   4A0-103参考書

NO.8 Which of the following indicates the path over which an LSP's tail end router will return an RSVP RESV
message?
A. The IGP FIB.
B. The Reservation State Block (RSB)
C. The Path State Block (PSB)
D. The opaque database.
Answer: C

Alcatel-Lucent   4A0-103過去問   4A0-103   4A0-103練習問題   4A0-103参考書

NO.9 You wish to advertise LDP labels for all local networks; which is the most effective policy statement to
use?
A. from prefix-list direct
B. match local
C. from protocol direct
D. match protocol direct
E. from protocol local
Answer: C

Alcatel-Lucent認証試験   4A0-103   4A0-103問題集   4A0-103認定試験   4A0-103   4A0-103

NO.10 In MPLS, labels are distributed in the opposite direction of the data flow.
A. TRUE
B. FALSE
Answer: A

Alcatel-Lucent認定証   4A0-103   4A0-103認証試験   4A0-103練習問題   4A0-103問題集

NO.11 Click on the exhibit button below.
With fast reroute enabled, and given the following:
-The protected LSP path is R1-R2-R3.
-All links are of equal cost.
Which of the following statements is true? (Choose two)
A. Router R1 is the LSP originator and is also a PLR.
B. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R2-R3.
C. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R3.
D. If the R2-R3 link fails, router R3 becomes a PLR
E. None of the nodes can be protected with FRR.
Answer: A,C

Alcatel-Lucent認定証   4A0-103   4A0-103   4A0-103

NO.12 Which of the following message types does RSVP use to set up an LSP? (Choose two)
A. Path message
B. iLER message
C. Resv message
D. LSP setup call request
E. eLER message
Answer: A,C

Alcatel-Lucent過去問   4A0-103認証試験   4A0-103参考書   4A0-103   4A0-103参考書

NO.13 What is the common usage of the MPLS EXP bits?
A. Each implementation can use them as they see fit.
B. They are used to carry the Ethertype value.
C. They are used to carry the TTL value.
D. They are used to carry QoS classification.
E. They are used to carry fragmentation flag information
Answer: D

Alcatel-Lucent過去問   4A0-103認定証   4A0-103過去問   4A0-103参考書

NO.14 Which command can be used to verify the LDP settings for label distribution and retention?
A. show router ldp default
B. show router ldp parameters
C. show router ldp settings
D. show router mpls settings
E. show router mpls label-options
Answer: B

Alcatel-Lucent   4A0-103   4A0-103

NO.15 Click on the exhibit button below.
Given the configuration below, what is the system ID of the destination node?
A. 10.32.1.2
B. 10.1.478
C. 1048.1.1
D. Cannot tell from this configuration
E. 10.1.2.2
Answer: B

Alcatel-Lucent   4A0-103   4A0-103   4A0-103練習問題   4A0-103

NO.16 Which of the following is defined by the following statement? All label mappings received from all peer
LSRs are saved.
A. Conservative label retention
B. Liberal label retention.
C. Downstream on demand.
D. Downstream unsolicited.
Answer: B

Alcatel-Lucent   4A0-103   4A0-103認定証   4A0-103

NO.17 Assume that, on the Alcatel-Lucent 7750 SR, an LSP is configured with one-to-one FRR and node
protection. Which of the following statements are FALSE? (Choose two)
A. Each PLR signals a detour LSP that avoids the downstream node. If the downstream node cannot be
avoided, a detour LSP that avoids the downstream link is signaled.
B. The detour LSP can take one or more hops before merging back on the protected LSP.
C. The merge point of the protected LSP must be the next-next-hop node
D. The ingress router will set the local protection desired flag in the session attribute object of the path
message to inform all routers along the protected LSP path to establish detour LSPs.
E. The label recording desired flag must be set in the session attribute object in order for the PLR to know
what label to swap when using the detour LSP.
Answer: C,E

Alcatel-Lucent   4A0-103   4A0-103   4A0-103認定試験   4A0-103

NO.18 Click on the exhibit button below.
Consider the following:
-Routers R1 and R4 are in Area 1.
-Routers R4 and R5 in Area 0.
-Routers R5 and R3 are in Area 2.
To support LDP-over-RSVP tunnels between routers R1 and R3 over path R1-R4-R5-R3, with which
routers will router R5 require targeted sessions? (Choose two)
A. Router R1
B. Router R4
C. Router R2
D. Router R3
Answer: B,D

Alcatel-Lucent認定証   4A0-103   4A0-103   4A0-103   4A0-103

NO.19 Which of the following statements best describe MPLS fast reroute characteristics? (Choose two)
A. Fast reroute requires you to manually define detour paths.
B. Fast reroute provides path protection close to the failure point
C. Fast reroute performs automatic path calculation and signaling.
D. Fast reroute protects both primary and secondary paths.
Answer: B,C

Alcatel-Lucent練習問題   4A0-103   4A0-103   4A0-103問題集

NO.20 Click on the exhibit button below.
Assuming that LSP R1-R2-R3 requests the default fast reroute configuration, which router becomes a
DMP for the detour tunnels?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Answer: E

Alcatel-Lucent認証試験   4A0-103   4A0-103認定証   4A0-103

人間はそれぞれ夢を持っています。適当な方法を採用する限り、夢を現実にすることができます。IT-Passports.comのAlcatel-Lucentの4A0-103試験トレーニング資料を利用したら、Alcatel-Lucentの4A0-103認定試験に合格することができるようになります。どうしてですかと質問したら、IT-Passports.comのAlcatel-Lucentの4A0-103試験トレーニング資料はIT認証に対する最高のトレーニング資料ですから。その資料は最完全かつ最新で、合格率が非常に高いということで人々に知られています。それを持っていたら、あなたは時間とエネルギーを節約することができます。IT-Passports.comを利用したら、あなたは楽に試験に受かることができます。

自信満々とAlcatel-Lucent 4A0-106認定試験を受験しよう

我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。IT-Passports.com Alcatel-Lucentの4A0-106試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。インターネットで時勢に遅れない4A0-106勉強資料を提供するというサイトがあるかもしれませんが、IT-Passports.comはあなたに高品質かつ最新のAlcatel-Lucentの4A0-106トレーニング資料を提供するユニークなサイトです。IT-Passports.comの勉強資料とAlcatel-Lucentの4A0-106に関する指導を従えば、初めてAlcatel-Lucentの4A0-106認定試験を受けるあなたでも一回で試験に合格することができます。

あなたのキャリアでいま挑戦に直面していますか。自分のスキルを向上させ、よりよく他の人に自分の能力を証明したいですか。昇進する機会を得たいですか。そうすると、はやく4A0-106認定試験を申し込んで認証資格を取りましょう。Alcatel-Lucentの認定試験はIT領域における非常に大切な試験です。Alcatel-Lucentの4A0-106認証資格を取得すると、あなたは大きなヘルプを得ることができます。では、どのようにはやく試験に合格するかを知りたいですか。IT-Passports.comの4A0-106参考資料はあなたの目標を達成するのに役立ちます。

試験番号：4A0-106問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Virtual Private Routed Networks」
問題と解答：全61問

4A0-106認定試験の資格を取得するのは容易ではないことは、すべてのIT職員がよくわかっています。しかし、4A0-106認定試験を受けて資格を得ることは自分の技能を高めてよりよく自分の価値を証明する良い方法ですから、選択しなければならならないです。ところで、受験生の皆さんを簡単にIT認定試験に合格させられる方法がないですか。もちろんありますよ。IT-Passports.comの問題集を利用することは正にその最良の方法です。IT-Passports.comはあなたが必要とするすべての4A0-106参考資料を持っていますから、きっとあなたのニーズを満たすことができます。IT-Passports.comのウェブサイトに行ってもっとたくさんの情報をブラウズして、あなたがほしい試験4A0-106参考書を見つけてください。

IT-Passports.comは専門的な、受験生の皆さんを対象とした最も先進的なAlcatel-Lucentの4A0-106試験の認証資料を提供しているサイトです。IT-Passports.comを利用したら、Alcatel-Lucentの4A0-106試験に合格するのを心配することはないです。

今競争の激しいIT業界で地位を固めたいですが、Alcatel-Lucent 4A0-106認証試験に合格しなければなりません。IT業界ではさらに強くなるために強い専門知識が必要です。Alcatel-Lucent 4A0-106認証試験に合格することが簡単ではなくて、Alcatel-Lucent 4A0-106証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。

いま4A0-106認定試験の過去問問題集や参考書を必要とするでしょう。仕事に忙しいですから、試験の準備をする時間が足りないでしょう。ですから、効率が良い試験4A0-106参考書が必要です。もちろん、よりよく試験の準備をするように、自分に相応しいツールを選択するのは一番大事なことです。これは試験に合格できるかどうかに関連する大切な問題です。ですから、IT-Passports.comの4A0-106問題集を選択してください。

偉大な事業を実現するために信心を持つ必要があります。あなたは自分の知識レベルを疑っていて試験の準備をする前に詰め込み勉強しているときに、自分がどうやって試験に受かることを確保するかを考えましたか。心配しないでください。IT-Passports.comはあなたがAlcatel-Lucentの4A0-106認定試験に合格する確保です。IT-Passports.com のトレーニング試験は問題と解答に含まれています。しかも１００パーセントの合格率を保証できます。IT-Passports.comのAlcatel-Lucentの4A0-106試験トレーニング資料を手に入れたら、あなたは自分の第一歩を進めることができます。試験に合格してから、あなたのキャリアは美しい時期を迎えるようになります。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-106.html

NO.1 Complete the following statement. In a VPRN, the label signaled by RSVP-TE is used to
____________________.
A. Identify the egress PE in the MPLS domain
B. Signal the egress VPRN ID
C. Identify the ingress PE in the MPLS domain
D. transport route updates between PEs
Answer: A

Alcatel-Lucent練習問題   4A0-106認証試験   4A0-106認定証   4A0-106認証試験

NO.2 Complete the following statement. In a VPRN, the label signaled by RSVP-TE is used to
____________________.
A. Identify the egress PE in the MPLS domain
B. Signal the egress VPRN ID
C. Identify the ingress PE in the MPLS domain
D. transport route updates between PEs
Answer: A

Alcatel-Lucent   4A0-106問題集   4A0-106   4A0-106練習問題

NO.3 In a traditional layer 3 VPN which of the following will be an issue when there is overlapping address
space between two customers? Choose the best answer.
A. There will be increased memory usage on the PE
B. There will be increased CPU utilization on the PE
C. The CE will reject the overlapping prefix
D. The PE will not recognize the prefixes as being different
E. There is no issue with overlapping address space in a traditional Layer 3 VPN
Answer: D

Alcatel-Lucent練習問題   4A0-106認証試験   4A0-106認証試験   4A0-106過去問   4A0-106   4A0-106認定試験

NO.4 What are the two primary problems the service provider must consider when providing traditional
Layer 3 VPN services using only a single common routing table in the provider core? (Choose two)
A. Memory exhaustion in the provider core
B. Route leaking between the customer networks
C. CPU utilization for route processing
D. Unwanted packet forwarding between customer networks
Answer: BD

Alcatel-Lucent練習問題   4A0-106   4A0-106

NO.5 When a Service Provider offers VPRN services to its customers, which of the following functions are
expected to be the responsibility of the Service Provider? (Choose three)
A. Distributing the customer generated labels between sites
B. Distributing the customer routing information between sitesDistributing the customer? routing
information between sites
C. Forwarding the customer originated data packets to the appropriate destination
D. Forwarding the provider originated data packets to the appropriate customer site
E. Providing secure layer 3 routing exchange between sites
Answer: BCE

Alcatel-Lucent   4A0-106   4A0-106

NO.6 Choose the answer that best completes the following sentence. The CE device is typically configured
with ___________________________.
A. A single routing protocol for exchanging routes with both the internal customer routers and with the PE
B. MP-BGP to exchange routes with the PE.
C. MPLS and a routing protocol for the exchange of labels and routes with the PE
D. MPLS for exchanging labels with other CE devices
E. A routing protocol for exchanging routes with the internal customer routers and a routing protocol for
exchanging routes with the PE
Answer: E

Alcatel-Lucent認証試験   4A0-106   4A0-106参考書   4A0-106   4A0-106認証試験

NO.7 In a VPRN the PE device is configured to run which of the following protocols? (Choose three.)
A. MP-BGP for exchanging customer routes with other PEs
B. A routing protocol for exchanging customer routes with the CE
C. MPLS for exchanging labels with other provider core devices
D. MPLS for exchanging labels with the CE devices
E. Targeted LDP for exchanging VPRN labels with other PE devices
F. A label signaling protocol for defining transport tunnels between PE and CE devices
Answer: ABC

Alcatel-Lucent過去問   4A0-106   4A0-106認証試験   4A0-106   4A0-106

NO.8 Which of the following statements are true regarding P devices in an MPLS VPRN? (Choose two.)
A. Participate in service provider core routing
B. P devices are not required to be MPLS enabled. MPLS is only required on the PE devices
C. Run a common routing protocol with the CE router
D. Must support MP-BGP
E. Do not have any connections to the CE
F. Must be aware of the VPRNs
Answer: AE

Alcatel-Lucent過去問   4A0-106過去問   4A0-106   4A0-106   4A0-106

NO.9 Which of the following terms also correctly describes a Layer 3 VPN? (Choose three)
A. VPRN
B. BGP/MPLS VPN
C. VLL
D. VPLS
E. IP-VPN
F. ePipe
Answer: ABE

Alcatel-Lucent   4A0-106問題集   4A0-106認定試験   4A0-106   4A0-106   4A0-106認定資格

NO.10 What are the main functions of a Layer 3 VPN? (Choose three).
A. Distributing customer routing information between sites
B. Forwarding customer data packets
C. Providing an integrated billing solution
D. Maintaining separation between distinct customer networks
E. Allowing the implementation of Layer 3 devices in the provider core
Answer: ABD

Alcatel-Lucent   4A0-106   4A0-106   4A0-106   4A0-106認定資格

あなたはIT職員ですか。今年で一番人気があるIT認証試験に申し込みましたか。もし「はい」と答えてくれたら、あなたはラッキですよ。IT-Passports.comのAlcatel-Lucentの4A0-106トレーニング資料はあなたが１００パーセント試験に合格することを保証しますから。これは絶対に真実なことです。IT業種でより高いレベルに行きたいのなら、IT-Passports.comを選ぶのは間違いなく選択です。当社のトレーニング資料はあなたが全てのIT認証試験に合格することを助けます。しかも値段が手頃です。信じないことはしないでください。IT-Passports.comを利用したら分かります。

Alcatel-Lucent 4A0-107試験の認証資格は一層重要になった

IT-Passports.comは客様の要求を満たせていい評判をうけいたします。たくさんのひとは弊社の商品を使って、試験に順調に合格しました。

あなたの予算が限られている場合に完全な問題集を必要としたら、IT-Passports.comのAlcatel-Lucentの4A0-107試験トレーニング資料を試してみてください。IT-Passports.comはあなたのIT認証試験の護衛になれて、現在インターネットで一番人気があるトレーニング資料が提供されたサイトです。Alcatel-Lucentの4A0-107試験はあなたのキャリアのマイルストーンで、競争が激しいこの時代で、これまで以上に重要になりました。あなたは一回で気楽に試験に合格することを保証します。将来で新しいチャンスを作って、仕事が楽しげにやらせます。IT-Passports.comの値段よりそれが創造する価値ははるかに大きいです。

我々はAlcatel-Lucentの4A0-107試験問題と解答また試験シミュレータを最初に提供し始めたとき、私達が評判を取ることを夢にも思わなかった。我々が今行っている保証は私たちが信じられないほどのフォームです。Alcatel-Lucentの4A0-107試験はIT-Passports.comの保証を検証することができ、１００パーセントの合格率に達することができます。

現在の仕事に満足していますか。自分がやっていることに満足していますか。自分のレベルを高めたいですか。では、仕事に役に立つスキルをもっと身に付けましょう。もちろん、IT業界で働いているあなたはIT認定試験を受けて資格を取得することは一番良い選択です。それはより良く自分自身を向上させることができますから。もっと大切なのは、あなたもより多くの仕事のスキルをマスターしたことを証明することができます。では、はやくAlcatel-Lucentの4A0-107認定試験を受験しましょう。この試験はあなたが自分の念願を達成するのを助けることができます。試験に合格する自信を持たなくても大丈夫です。IT-Passports.comへ来てあなたがほしいヘルパーと試験の準備ツールを見つけることができますから。IT-Passports.comの資料はきっとあなたが4A0-107試験の認証資格を取ることを助けられます。

試験番号：4A0-107問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Quality of Service」
問題と解答：全100問

IT-Passports.comは Alcatel-Lucentの4A0-107認定試験の認証に対して特別な教育ツールで、あなたに多くの時間とお金が使わないようにIT技術にも身につけさせるサイトでございます。IT-Passports.comは専門家チームが自分の知識と経験をを利用してAlcatel-Lucentの4A0-107認証試験の問題集を研究したものでございます。

IT-Passports.comの4A0-107問題集には、PDF版およびソフトウェア版のバージョンがあります。それはあなたに最大の利便性を与えることができます。いつでもどこでも問題を学ぶことができるために、あなたはPDF版の問題集をダウンロードしてプリントアウトすることができます。そして、ソフトウェア版の4A0-107問題集は実際試験の雰囲気を感じさせることができます。そうすると、受験するとき、あなたは試験を容易に対処することができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-107.html

NO.1 Which of the following can be used as classifiers of customer traffic? (Choose three)
A. DSCP value
B. 802.1p value
C. IP DF bit
D. TCP/UDP port numbers
E. HTML version number
Answer: A,B,D

Alcatel-Lucent認定資格   4A0-107   4A0-107過去問

NO.2 Which of the following are possible criteria for classifying packets at the network port ingress on the
Alcatel-Lucent 7750 SR? (Choose three)
A. The EXP bits in the MPLS header.
B. The packet's source and destination IP addresses.
C. The packet's DSCP bits.
D. The dot1p bits in the frame header.
E. The ID of an SDP that is transporting the packet.
Answer: A,C,D

Alcatel-Lucent認定証   4A0-107   4A0-107参考書   4A0-107   4A0-107   4A0-107

NO.3 What is the maximum number of SAP-ingress policies that can be applied on a SAP?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 8
Answer: A

Alcatel-Lucent   4A0-107認定試験   4A0-107認定証   4A0-107   4A0-107   4A0-107認定証

NO.4 Which of the following BEST describes a SAP when regarding QoS?
A. A point in the network where EXP bits can be mapped to one of eight predefined FCs, each one with its
own queue.
B. A logical point in a service tunnel where all of customer traffic is aggregated.
C. A point at which the initial classification of customer traffic occurs.
D. A point in the network where QoS parameters are discarded in favor of lower-level hardware queuing
functions, such as LLI (Link Layer Interleave).
E. A point in the network where traffic flows from multiple different services are queued together, based on
forwarding class.
Answer: C

Alcatel-Lucent   4A0-107   4A0-107問題集

NO.5 Individual application streams are considered microflows, whereas __________ are considered
macroflows.
A. SAPs
B. SDPs
C. Services
D. Queues
E. Schedulers
F. Forwarding classes
Answer: F

Alcatel-Lucent認定試験   4A0-107   4A0-107   4A0-107認定資格

NO.6 Which of the following are characteristics of 802.1p? (Choose two)
A. 802.1p adds 16 bits to the Layer 2 header,
B. 802.1p adds 16 bits to the Layer 3 header.
C. 802.1p specifies 64 different priority levels.
D. 802.1p uses a field in the 802.1Q header.
E. 802.1p uses a field in the Layer 3 IP header
F. 802.1p defines a 3-bit Class of Service field.
Answer: D,F

Alcatel-Lucent過去問   4A0-107問題集   4A0-107認定試験   4A0-107   4A0-107認定試験   4A0-107認証試験

NO.7 Which of the following statements regarding DSCP bits are TRUE? (Choose three)
A. The three most significant (first) bits define 8 forwarding classes.
B. The three least significant (last) bits of the DSCP specify the drop probability.
C. The full 8 bits of the TOS field are used for DSCP.
D. To convert DSCP to IP precedence, the three most significant (first) bits are matched.
E. DSCP provides for eight drop probabilities.
Answer: A,B,D

Alcatel-Lucent過去問   4A0-107   4A0-107

NO.8 What is an SLA? (Choose two)
A. An SLA is used to provide automated, real-time testing and alarming for throughput, latency, and jitter
across a provider's network.
B. An SLA is an agreement between a customer and a provider that dictates the treatment of customer
traffic across the provider's network.
C. An SLA allows customers to control all traffic within the service provider's network by prioritizing their
traffic over others as desired.
D. An SLA allows a customer to pre-mark traffic and ensure that traffic is treated as per the agreement
within the provider's network.
E. An SLA is a standard set of network QoS policies that a provider shares to all its customers, allowing
them to better understand the treatment of traffic within the provider's network.
Answer: B,D

Alcatel-Lucent   4A0-107過去問   4A0-107認定試験   4A0-107   4A0-107   4A0-107過去問

NO.9 What is the 6-bit binary representation of DSCP value AF21?
A. 010011
B. 100010
C. 010001
D. 001100
E. 010010
Answer: E

Alcatel-Lucent   4A0-107   4A0-107認定資格   4A0-107参考書   4A0-107認証試験

NO.10 Click the exhibit button below.
Based on the configuration shown below, name the forwarding class to be associated with a TCP packet
encapsulated inside an Ethernet frame that arrives on SAP 1/1/5 with the following characteristics:
Destination IP address = 120.110.1.1
TCP port number = 23
DSCP value = nc1
Dot1pvalue = 3
A. H2
B. NC
C. L2
D. EF
E. H1
F. BE
Answer: C

Alcatel-Lucent   4A0-107認証試験   4A0-107問題集   4A0-107   4A0-107

NO.11 Which of the following are major components of QoS functionality on the Alcatel-Lucent 7750 SR?
(Choose three)
A. Microflow reservations using RSVP
B. DSCP to EXP translation
C. Traffic classification
D. Automatic profiling and policy configuration
E. Buffer memory management
F. Traffic scheduling
Answer: C,E,F

Alcatel-Lucent過去問   4A0-107認定証   4A0-107過去問

NO.12 How many bits does DSCP use to provide QoS marking options?
A. 8
B. 16
C. 6
D. 4
E. 3
Answer: C

Alcatel-Lucent   4A0-107   4A0-107   4A0-107   4A0-107

NO.13 Which of the following are characteristics of DSCP? (Choose two)
A. DSCP is part of the Layer 3 header.
B. DSCP is a 6-bit field.
C. DSCP specifies eight different priorities.
D. DSCP specifies four precedence levels.
E. DSCP is part of the Layer 2 header
F. DSCP specifies 128 different per-hop behaviors.
Answer: A,B

Alcatel-Lucent   4A0-107   4A0-107認定資格   4A0-107過去問

NO.14 The IP ToS field consists of ________ bits, of which ________are used. The _________most significant
(first) bits define precedence.
A. 8, 6, 3
B. 8, 8, 6
C. 16, 8, 4
D. 8, 6, 4
E. 24, 16, 8
Answer: A

Alcatel-Lucent   4A0-107   4A0-107認定試験   4A0-107

NO.15 Which of the following are examples of metrics for QoS.?
A. Signal degradation, attenuation, line loss
B. Latency, FIFO, WRED
C. Delay, jitter, packet loss
D. SNR, queue depth, latency
E. Attenuation, dispersion, latency
Answer: C

Alcatel-Lucent   4A0-107   4A0-107   4A0-107認定証   4A0-107

IT認定試験を受ける受験生はほとんど仕事をしている人です。試験に受かるために大量の時間とトレーニング費用を費やした受験生がたくさんいます。ここで我々は良い学習資料のウェブサイトをお勧めします。IT-Passports.comというサイトです。IT-Passports.comの Alcatel-Lucentの4A0-107試験資料を利用したら、時間を節約することができるようになります。我々はあなたに向いて適当の資料を選びます。しかも、サイトでテストデータの一部は無料です。もっと重要のことは、リアルな模擬練習はあなたがAlcatel-Lucentの4A0-107試験に受かることに大きな助けになれます。IT-Passports.com のAlcatel-Lucentの4A0-107試験資料はあなたに時間を節約させることができるだけではなく、あなたに首尾よく試験に合格させることもできますから、IT-Passports.comを選ばない理由はないです。

Alcatel-Lucent 4A0-101認定試験で困っているのか

IT-Passports.comを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。IT-Passports.comはAlcatel-Lucent 4A0-101認証試験を助けって通じての最良の選択で、１００％のAlcatel-Lucent 4A0-101認証試験合格率のはIT-Passports.com最高の保証でございます。君が選んだのはIT-Passports.com、成功を選択したのに等しいです。

IT-Passports.comのIT認証試験問題集は長年のトレーニング経験を持っています。IT-Passports.com Alcatel-Lucentの4A0-101試験トレーニング資料は信頼できる製品です。当社のスタッフ は受験生の皆様が試験で高い点数を取ることを保証できるように、巨大な努力をして皆様に最新版の4A0-101試験トレーニング資料を提供しています。IT-Passports.com Alcatel-Lucentの4A0-101試験材料は最も実用的なIT認定材料を提供することを確認することができます。

IT-Passports.comは頼りが強い上にサービスもよくて、もし試験に失敗したら全額で返金いたしてまた一年の無料なアップデートいたします。

あなたの夢は何ですか。あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっと望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。IT業種で仕事しているあなたは、夢を達成するためにどんな方法を利用するつもりですか。実際には、IT認定試験を受験して認証資格を取るのは一つの良い方法です。最近、Alcatel-Lucentの4A0-101試験は非常に人気のある認定試験です。あなたもこの試験の認定資格を取得したいのですか。さて、はやく試験を申し込みましょう。IT-Passports.comはあなたを助けることができますから、心配する必要がないですよ。

試験番号：4A0-101問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Interior Routing Protocols and High Availability」
問題と解答：全177問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-101.html

NO.1 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B

Alcatel-Lucent   4A0-101   4A0-101問題集

NO.2 When a router receives an IP packet, but does not find a match in the routing table for the
destination IP address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B

Alcatel-Lucent   4A0-101   4A0-101

NO.3 Which of the following statements apply to link state protocol behavior? Choose three
answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C,E

Alcatel-Lucent   4A0-101過去問   4A0-101

NO.4 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming
that there are no stub networks, which of the following statements regarding type 4 LSA generation
is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA
that is flooded to area 2.
Answer: D

Alcatel-Lucent参考書   4A0-101   4A0-101認定証   4A0-101参考書   4A0-101認定資格   4A0-101

NO.5 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D

Alcatel-Lucent   4A0-101認定資格   4A0-101   4A0-101   4A0-101   4A0-101練習問題

NO.6 Click the exhibit button.
A static route is created on router R1, using the "static-route 0.0.0.0/ 0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/ 0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C

Alcatel-Lucent   4A0-101認定試験   4A0-101   4A0-101練習問題

NO.7 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2
goes down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of
Hello timeouts. At this point, both routers R1 and R2 re-compute their link state database and send
updates to their adjacent routers. Once the process is complete for all routers, the networks have
converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At
this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information.
At this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link
is down. At this point, both routers R1 and R2 re-compute their link state database and sendupdates
to their adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A

Alcatel-Lucent認定証   4A0-101認定資格   4A0-101参考書   4A0-101参考書

NO.8 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach
the network behind router R2?
A. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2 / 24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/ 24 next-hop 139.120.121.2
Answer: A

Alcatel-Lucent参考書   4A0-101   4A0-101問題集   4A0-101

NO.9 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D

Alcatel-Lucent   4A0-101   4A0-101   4A0-101認定証

NO.10 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B

Alcatel-Lucent   4A0-101認証試験   4A0-101問題集   4A0-101認定試験

NO.11 Which of the following commands can be used to display the number of SPF computations
that have been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A

Alcatel-Lucent   4A0-101   4A0-101練習問題   4A0-101認定証   4A0-101

NO.12 Static routing will be used in a network between a corporate head office, with many
connected networks, and a branch office, with one connection to the head office. Which of the
following best describes the likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more
specific static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office
router will have a default route.
Answer: D

Alcatel-Lucent   4A0-101認定証   4A0-101   4A0-101

NO.13 Click the exhibit button.
Routers R1, R2, and R3 are running a classful routing protocol between them. Assuming that router
R1 advertises all directly connected networks, how will these networks be represented in router
R3's routing table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/ 24 and one entry for 10.1.2.0/ 24.
C. The networks will be represented with one entry of 10.0.0.0/ 8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/ 24 in router R3's route table.
Answer: C

Alcatel-Lucent認定証   4A0-101   4A0-101   4A0-101認定資格

NO.14 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure
router static-route 10.2.3.0/ 24 next-hop 10.1.2.1" command. What is the correct traceroute
command to test this static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A

Alcatel-Lucent認定証   4A0-101認定試験   4A0-101   4A0-101認証試験   4A0-101
15. What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B

Alcatel-Lucent認定証   4A0-101   4A0-101認証試験
16. Which of the following statements regarding distance vectors protocols are true? (Choose
two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted
beyond the immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant
routers and how they interconnect
Answer: A,C

Alcatel-Lucent認証試験   4A0-101   4A0-101   4A0-101認定証   4A0-101

IT-Passports.comの問題集はIT専門家がAlcatel-Lucentの4A0-101認証試験について自分の知識と経験を利用して研究したものでございます。IT-Passports.comの問題集は真実試験の問題にとても似ていて、弊社のチームは自分の商品が自信を持っています。IT-Passports.comが提供した商品をご利用してください。もし失敗したら、全額で返金を保証いたします。