IT-Passports.comのAdobeの9A0-057試験トレーニング資料が受験生の皆様の評判を取ったのはもう最近のことではないです。これはIT-Passports.comのAdobeの9A0-057試験トレーニング資料は確かに信頼できて、受験生の皆様が首尾よく試験に合格することに助けを差し上げられることが証明されました。 IT-Passports.comのAdobeの9A0-057試験トレーニング資料がベストセラーになって、他のサイトをずっと先んじて皆様の認可を取りましたから、好評は言うまでもないです。 Adobeの9A0-057認定試験を受けたら、速くIT-Passports.comというサイトをクリックしてください。あなたがずっとほしいものを手に入れることができますから。最もプロな人々が注目しているIT専門家になりたかったら、後悔しないように速くショッピングカートを入れましょう。
IT-Passports.comが提供したAdobeの9A0-057トレーニング資料はシミュレーションの度合いがとても高いでから、実際の試験で資料での同じ問題に会うことができます。これは当社のITエリートの団体はすごい能力を持っていることが説明されました。現在、野心家としてのIT職員がたくさんいて、自分の構成ファイルは市場の需要と互換性があることを確保するために、人気があるIT認証試験を通じて自分の夢を実現します。そのようなものとして、Adobeの9A0-057試験はとても人気がある認定試験です。IT-Passports.comが提供したAdobeの9A0-057トレーニング資料を手にすると、夢への扉はあなたのために開きます。
学歴は実力と等しくなく、能力とも等しくないです。本当の能力は実践で鍛えたもので、学歴と直接な関係がないです。「私はだめです。」と思わないでください。Adobeの9A0-057試験に申し込んだあなたは自分が合格できないなんてを心配だったら、IT-Passports.comのAdobeの9A0-057試験トレーニング資料を利用してください。学歴がどんなに高くて、能力がどんなに低くても、首尾よく試験に合格することができます。
IT-Passports.comのAdobeの9A0-057トレーニング資料を利用したら、初めて試験を受けるあなたでも一回で試験に合格できることを保証します。IT-Passports.comのAdobeの9A0-057トレーニング資料を利用しても合格しないのなら、我々は全額で返金することができます。あなたに他の同じ値段の製品を無料に送って差し上げます。
IT-Passports.comは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。
多くのIT業界の友達によるとAdobe認証試験を準備することが多くの時間とエネルギーをかからなければなりません。もし訓練班とオンライン研修などのルートを通じないと試験に合格するのが比較的に難しい、一回に合格率非常に低いです。IT-Passports.comはもっとも頼られるトレーニングツールで、Adobeの9A0-057認定試験の実践テストソフトウェアを提供したり、Adobeの9A0-057認定試験の練習問題と解答もあって、最高で最新なAdobeの9A0-057認定試験問題集も一年間に更新いたします。
IT-Passports.comのIT業界専門家チームは彼らの経験と知識を利用して絶えないな試験対策材料の品質を高めて、受験者の需要を満たして、受験者のはじめてAdobe 9A0-057試験を順調に合格するを保証します。あなた達はIT-Passports.comの商品を購入してもっともはやく正確に試験に関する情報を手に入れます。IT-Passports.comの商品は試験問題を広くカーバして、認証試験の受験生が便利を提供し、しかも正確率100%です。そして、試験を安心に参加してください。
試験番号：9A0-057問題集
試験科目：Adobe 「Adobe Illustrator CS3 ACE Exam」
問題と解答：全130問
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/9A0-057.html
NO.1 You want to create an object by using a tool that allows you to connect lines and curves. The lines
must be smooth and the anchor points must be placed at all positions where a line or a curve changes
direction. Which tool should you use?
A. Pencil
B. Brush
C. Pen
D. Line
Answer: C
Adobe 9A0-057認定試験 9A0-057参考書 9A0-057認定証
NO.2 You have an Illustrator document that has decorative ornament characters. You want to view all other
ornaments that are available in the fonts that are used in the document. Which panel should you use?
A. Character
B. Control
C. Glyphs
D. Character Styles
Answer: C
Adobe 9A0-057認証試験 9A0-057過去問
NO.3 You want to change an object's fill from solid to a gradient. You create the gradient and fill another
object in your document. What should you do to apply the gradient fill to the object?
A. Select the object and use the Eyedropper tool to select the gradient fill.
B. Select the object and use the Paint Brush tool to apply the gradient fill.
C. Select the object and use the Gradient tool to apply the gradient fill.
D. Select the gradient pattern in the Swatches panel.
Answer: A
Adobe 9A0-057練習問題 9A0-057認証試験 9A0-057認定資格 9A0-057 9A0-057練習問題
NO.4 You open a legacy document, loading the same font that was used during the document creation.
When you compare this document with a hard copy of the original document, you discover that the type in
the new document has reflowed. Why does this happen?
A. The type is converted to outline.
B. The file is saved in the EPS format.
C. The OpenType contextual alternates are enabled.
D. The type engines in Illustrator versions are different.
Answer: D
Adobe 9A0-057認定証 9A0-057 9A0-057
NO.5 You want to apply color to the headline of an advertisement. The gradient fill of the color must
complement the background image that is placed as a link in the document. You create a linear gradient
and apply the gradient to the type, but the type remains black. What should you do?
A. Drag the gradient onto the type with the Gradient tool.
B. Sample the gradient with the Eyedropper tool and apply it to the headline type.
C. Create a character style defining the gradient fill as a Character Color attribute and apply it to the
headline.
D. Use the Create Outlines command to make paths from the headline type and apply the gradient.
Answer: D
Adobe 9A0-057 9A0-057 9A0-057
NO.6 You want to create an object to be used at several locations on a poster. You draw the object in a
document, save the object as a symbol, and apply the symbol multiple times. You want to change the
color of the original object without affecting the existing symbols applied to the poster. What should you
do?
A. Copy and paste the symbol in the document to break the link with the Symbols panel.
B. Select each object in the poster and click the Break Link to Symbol button in the Symbols panel.
C. Select the applied symbols in the poster and choose Expand to break the link.
D. Select the object and choose Redefine Symbol in the Symbols panel menu to break the link.
Answer: B
Adobe問題集 9A0-057 9A0-057 9A0-057
NO.7 You are creating a conference schedule and want to specify a description for different seminars. The
same typographic attributes, including typeface, leading, and alignment, must be applied to each seminar
description. How should you apply these attributes?
A. Set one paragraph with the desired attributes and use the Bridge application to batch process the
attributes.
B. Create a paragraph style and apply it to the entire text.
C. Set one paragraph with the desired attributes, save as an EPS and place in the file.
D. Create a character style with the desired attributes and apply it to the entire text.
Answer: B
Adobe参考書 9A0-057 9A0-057参考書 9A0-057 9A0-057 9A0-057認定資格
NO.8 You are creating a drawing of a series of birds in flight. You draw a bird and you want to duplicate it
and change the angle of its direction. Each bird must rotate at an angle of 15 degrees from the last bird.
What should you do?
A. Select the bird and double-click the Rotate tool. Apply a 15-degree angle and click the Copy button to
copy the original bird.
B. Copy and paste the original bird. Use the Rotate tool to rotate the bird by using your mouse.
C. Use the Shear tool to select the bird. Apply a 15-degree angle and click the Copy button to copy the
original bird.
D. Use the Reflect tool to select the bird. Apply a 15-degree angle and click the Copy button to copy the
original bird.
Answer: A
Adobe参考書 9A0-057 9A0-057認定試験 9A0-057参考書
NO.9 You convert a photograph to a black and white line art image by using the Live Trace command. You
want to add a few colors to the photo. You choose Object > Live Trace > Tracing Options. What should
you do?
A. Change Mode to Color and adjust the Resample resolution.
B. Select Adjusted Image from the Raster drop-down list and select the Output to Swatches check box.
C. Change Mode to Color and increase the value in Max Colors.
D. Specify a value for Minimum Area and select the Output to Swatches check box.
Answer: C
Adobe参考書 9A0-057過去問 9A0-057認定資格 9A0-057認証試験
NO.10 You create a new paragraph style from a selected, formatted paragraph and apply it as you type in
more text. You then decide to decrease the type size of the style by 1 point. The change is reflected in all
styled paragraphs except the original paragraph in which the paragraph style was defined. Why does this
happen?
A. The original formatted paragraph was legacy text.
B. The original text was imported from Microsoft Word. The Word formatting was still retained by the text,
overriding the Illustrator paragraph style.
C. Character styles were created after the paragraph style was applied to the other paragraphs.
D. The paragraph style was not applied to the selected text after creating the paragraph style from the
selected paragraph.
Answer: D
Adobe認定証 9A0-057練習問題 9A0-057 9A0-057
NO.11 You create an object by using the Pen tool and apply a 1 point stroke to the object. You want to
change the stroke to a calligraphic brush stroke without redrawing the object. What should you do?
A. Use the Brush tool to change the stroke to a calligraphic brush stroke.
B. Select the stroke and change it by using the Stroke panel.
C. Select the stroke and update the stroke in the Brushes panel.
D. Open the Brushes panel and click the Options of Selected Object button.
Answer: C
Adobe 9A0-057 9A0-057 9A0-057 9A0-057
NO.12 What is the advantage of using an Envelope Distort warp on type artwork over applying a warp effect?
A. Envelope Distort allows you to encode the artwork by embedding the font in the Illustrator document.
B. Envelope Distort allows you to modify the shape of the envelope with the Direct Selection tool.
C. Envelope Distort allows you to create outlines and therefore, you are able to apply gradients and other
effects to the type.
D. Envelope Distort allows you to edit the effect after it is applied.
Answer: B
Adobe 9A0-057 9A0-057認定試験 9A0-057 9A0-057
NO.13 You create an object and now you want to increase its size proportionately by 10 percent. You select
the object. What should you do?
A. Use the Scale tool while holding the OPTION key on a Mac computer or the ALT key on a
Windows-based computer.
B. Use the Free Transform tool.
C. Choose Show Bounding Box, and pull one corner of the object in the direction you wish to scale.
D. Double-click the Scale tool, and choose the Uniform option.
Answer: D
Adobe 9A0-057 9A0-057 9A0-057
NO.14 You want to edit one line of type that is part of a paragraph in an existing document. Which tool should
you use?
A. Rectangle
B. Eraser
C. Area Type
D. Lasso
Answer: C
Adobe認定証 9A0-057認定証 9A0-057問題集 9A0-057問題集
NO.15 You want to distort a rectangle by using the Envelope Distort option from the Object menu. What
should you do?
A. Choose Make with Mesh and select the rows and columns to distort the rectangle.
B. Choose Make with Warp and select the Style and Bend to distort the rectangle.
C. Choose Envelope Options and select the Distort Appearance check box in the Envelope Options
dialog box.
D. Choose Make with Top Object to distort the rectangle.
Answer: B
Adobe認定証 9A0-057参考書 9A0-057
NO.16 You want to create a paragraph of justified text and hang the punctuation so that the right and left
sides of the paragraph maintain a clean, aligned appearance. What should you do?
A. Select the type object and choose Type > Optical Margin Alignment.
B. Use the Smart Punctuation command and enable Smart Quotes.
C. Enable Discretionary Ligatures in the OpenType panel.
D. Enable Optical Tracking in the Character panel.
Answer: A
Adobe 9A0-057認定試験 9A0-057参考書 9A0-057 9A0-057
NO.17 How does the OpenType font format differ from TrueType and Type 1 fonts?
A. OpenType is a format that can be modified. TrueType and Type 1 fonts CANNOT be modified.
B. OpenType can be used for both desktop printing and Web design. TrueType and Type 1 fonts can only
be used in PostScript printing.
C. OpenType is a cross-platform font format, and TrueType and Type 1 fonts are platform-specific font
formats.
D. OpenType refers to fonts that are outlined. TrueType and Type 1 refer to fonts that are solid.
Answer: C
Adobe 9A0-057過去問 9A0-057過去問 9A0-057認定資格
NO.18 You create a grouped set of objects and apply an opacity setting from 10 percent to 50 percent. You
want the set of objects to blend with the background without having an overlapping effect. What should
you do?
A. Apply Isolate Blending.
B. Apply Knockout Group.
C. Apply the Opacity & Mask Define Knockout shape.
D. Increase the opacity of all objects.
Answer: B
Adobe 9A0-057 9A0-057問題集 9A0-057問題集
NO.19 Click the Exhibit button.
You are creating a sales brochure based on a sample provided by your client. In the sample, the
punctuation appears outside the width of the justified type. What should you do to create the desired
effect without affecting the ability to edit the type?
A. Use the Paragraph panel to apply hanging left and right indents when punctuation appears near the
margins.
B. Set up guides on a grid, setting each line individually and positioning each line to force the punctuation
over the guides.
C. Delete the punctuation that falls near the margins and set the punctuation as separate type elements
outside the margins.
D. Use the Paragraph panel to apply Roman Hanging Punctuation.
Answer: D
Adobe認定資格 9A0-057認定試験 9A0-057 9A0-057 9A0-057
NO.20 You create a logo and add a patterned background to it. In the Appearance panel, you duplicate the fill
and create a gradient fill on the top of the patterned background. However, you are unable see the pattern
fill below the gradient fill. What should you do?
A. Change the stacking order to place the pattern background in front of the gradient.
B. Select the Reduce to Basic Appearance option in the Appearance panel.
C. Select the gradient fill and apply a blend mode.
D. Change the opacity settings of the pattern.
Answer: C
Adobe参考書 9A0-057 9A0-057認定試験 9A0-057認定証 9A0-057参考書
9A0-057試験は簡単ではありません。専門的な知識が必要で、もしあなたはまだこの方面の知識を欠かれば、IT-Passports.comは君に向ける知識を提供いたします。IT-Passports.comの専門家チームは彼らの知識や経験を利用してあなたの知識を広めることを助けています。そしてあなたに9A0-057試験に関するテスト問題と解答が分析して差し上げるうちにあなたのIT専門知識を固めています。
没有评论:
发表评论