显示标签为“JN0-532”的博文。显示所有博文
显示标签为“JN0-532”的博文。显示所有博文

2014年3月29日星期六

IT-Passports.comはJuniper JN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330試験の実践訓練を提供する

IT-Passports.comのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330問題集は素晴らしい参考資料です。この問題集は絶対あなたがずっと探しているものです。これは受験生の皆さんのために特別に作成し出された試験参考書です。この参考書は短い時間で試験に十分に準備させ、そして楽に試験に合格させます。試験のためにあまりの時間と精力を無駄にしたくないなら、IT-Passports.comのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330問題集は間違いなくあなたに最もふさわしい選択です。この資料を使用すると、あなたの学習効率を向上させ、多くの時間を節約することができます。

あなたのキャリアでいま挑戦に直面していますか。自分のスキルを向上させ、よりよく他の人に自分の能力を証明したいですか。昇進する機会を得たいですか。そうすると、はやくJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330認定試験を申し込んで認証資格を取りましょう。Juniperの認定試験はIT領域における非常に大切な試験です。JuniperJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330認証資格を取得すると、あなたは大きなヘルプを得ることができます。では、どのようにはやく試験に合格するかを知りたいですか。IT-Passports.comのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330参考資料はあなたの目標を達成するのに役立ちます。

もちろん、試験に関連する資料を探しているとき、他の様々な資料を見つけることができます。しかし、調査や自分自身の試用の後、IT-Passports.comのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330問題集が試験の準備ツールに最適であることはわかります。IT-Passports.comの資料は試験に準備する時間が十分ではない受験生のために特別に開発されるものです。それはあなたを試験に準備するときにより多くの時間を節約させます。しかも、IT-Passports.comのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330問題集はあなたが一回で試験に合格することを保証します。また、問題集は随時更新されていますから、試験の内容やシラバスが変更されたら、IT-Passports.comは最新ニュースを与えることができます。

試験番号:JN0-331問題集
試験科目:Juniper 「SEC,Specialist(JNCIS-SEC)」
問題と解答:全131問

試験番号:JN0-522問題集
試験科目:Juniper 「FXV,Associate (JNCIA-FWV)」
問題と解答:全160問

試験番号:JN0-532問題集
試験科目:Juniper 「FWV,Specialist (JNCIS -FWV)」
問題と解答:全146問

試験番号:JN0-560問題集
試験科目:Juniper 「Certified Internet Associate.....」
問題と解答:全120問

試験番号:JN0-570問題集
試験科目:Juniper 「JN0-570 JNCIS-SSL EXAM」
問題と解答:全150問

試験番号:JN0-330問題集
試験科目:Juniper 「JN0-330-Enhanced Services, Specialist(JNCIS-ES)」
問題と解答:全150問

いつもあなたに最高のJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330認定試験に関連する試験参考書を与えられるために、IT-Passports.comは常に問題集の質を改善し、ずっと最新の試験のシラバスに応じて問題集を更新しています。現在の市場では、IT-Passports.comはあなたの最もよい選択です。長い間にわたって、IT-Passports.comは多くの受験生に認可されました。私を信じていないなら、周りの人々に聞いてみてもいいです。IT-Passports.comの試験問題集を利用したことがある人がきっといますから。IT-Passports.comは最優秀な試験JN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330参考書を提供してあなたを試験に合格させることを保証します。

JuniperのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330認定試験に受かるためにがんばって勉強していれば、IT-Passports.comはあなたにヘルプを与えます。IT-Passports.com が提供したJuniperのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330問題集は実践の検査に合格したもので、最も良い品質であなたがJuniperのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330認定試験に合格することを保証します。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-330.html

NO.1 You want to create a policy allowing traffic from any host in the Trust zone to hostb.example.com
(172.19.1.1) in the
Untrust zone. How do you do create this policy?
A. Specify the IP address (172.19.1.1/32) as the destination address in the policy.
B. Specify the DNS entry (hostb.example.com.) as the destination address in the policy.
C. Create an address book entry in the Trust zone for the 172.19.1.1/32 prefix and reference this entry in
the policy.
D. Create an address book entry in the Untrust zone for the 172.19.1.1/32 prefix and reference this entry
in the policy.
Answer: D

Juniper認定試験   JN0-330   JN0-330

NO.2 Click the Exhibit button.
In the exhibit, what is the purpose of this OSPF configuration?
A. The router sends the file debugOSPF (containing hellos sent and LSA updates) to the syslog server.
B. The router traces both OSPF hellos sent and LSA updates, and stores the results in the debugOSPF
file.
C. The router traces both OSPF hellos sent and LSA updates, and sends the results to the syslog process
with the debugOSPF facility.
D. The router traces all OSPF operations, stores the results in the debugOSPF file, and marks both hellos
sent and LSAupdates in the file with a special flag.
Answer: B

Juniper   JN0-330   JN0-330

NO.3 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. network address translation
Answer: B

Juniper練習問題   JN0-330   JN0-330問題集   JN0-330認定試験   JN0-330練習問題   JN0-330認定資格

NO.4 Click the Exhibit button.
Based on the exhibit, client PC 192.168.10.10 cannot ping 1.1.1.2.
Which is a potential cause for this problem?
A. The untrust zone does not have a management policy configured.
B. The trust zone does not have ping enabled as host-inbound-traffic service.
C. The security policy from the trust zone to the untrust zone does not permit ping.
D. No security policy exists for the ICMP reply packet from the untrust zone to the trust zone.
Answer: C

Juniper練習問題   JN0-330認証試験   JN0-330   JN0-330

NO.5 Which two statements regarding asymmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: BC

Juniper   JN0-330認定資格   JN0-330

NO.6 You are not able to telnet to the interface IP of your JUNOS software with enhanced services device
from a PC on the same subnet. What is causing the problem?
A. Telnet is not being permitted by self policy.
B. Telnet is not being permitted by security policy.
C. Telnet is not allowed because it is not considered secure.
D. Telnet is not enabled as a host-inbound service on the zone.
Answer: D

Juniper認定試験   JN0-330認定証   JN0-330   JN0-330   JN0-330

NO.7 Click the Exhibit button.
host_a is in subnet_a and host_b is in subnet_b.
Given the configuration shown in the exhibit, which statement is true about traffic from host_a to host_b?
A. DNS traffic is denied.
B. Telnet traffic is denied.
C. SMTP traffic is denied.
D. Ping traffic is permitted.
Answer: B

Juniper参考書   JN0-330   JN0-330認定試験

NO.8 Click the Exhibit button.
Based on the configuration shown in the exhibit, what will happen to the traffic matching the security
policy?
A. The traffic is permitted through the myTunnel IPSec tunnel only on Tuesdays.
B. The traffic is permitted through the myTunnel IPSec tunnel daily, with the exception of Mondays.
C. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
7:00 am and 6:00 pm, and Thursdays between 7:00 am and 6:00 pm.
D. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
6:01 pm and 6:59 am, and Thursdays between 6:01 pm and 6:59 am.
Answer: C

Juniper認定試験   JN0-330認定試験   JN0-330   JN0-330認定試験

NO.9 Using a policy with the policy-rematch flag enabled, what happens to the existing and new sessions
when you change the policy action from permit to deny?
A. The new sessions matching the policy are denied. The existing sessions are dropped.
B. The new sessions matching the policy are denied. The existing sessions, not being allowed to carry
any traffic, simply timeout.
C. The new sessions matching the policy might be allowed through if they match another policy. The
existing sessions are dropped.
D. The new sessions matching the policy are denied. The existing sessions continue until they are
completed or their timeout is reached.
Answer:A

Juniper   JN0-330認定証   JN0-330   JN0-330   JN0-330

NO.10 Which statement is true about interface-based static NAT?
A. It also supports PAT.
B. It requires you to configure address entries in the junos-nat zone.
C. It requires you to configure address entries in the junos-global zone.
D. The IP addresses being translated must be in the same subnet as the incoming interface.
Answer: D

Juniper認証試験   JN0-330認定試験   JN0-330認証試験   JN0-330   JN0-330認定資格

NO.11 Which parameters must you select when configuring operating system probes SCREEN options?
A. syn-fin, syn-flood, and tcp-no-frag
B. syn-fin, port-scan, and tcp-no-flag
C. syn-fin, fin-no-ack, and tcp-no-frag
D. syn-fin, syn-ack-ack-proxy, and tcp-no-frag
Answer: C

Juniper   JN0-330認定試験   JN0-330   JN0-330練習問題   JN0-330

NO.12 Which two are components of the enhanced services software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC

Juniper   JN0-330   JN0-330参考書   JN0-330認定試験

NO.13 In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device?
A. This interface is a system-created interface.
B. This interface belongs to NODE0 of the cluster.
C. This interface belongs to NODE1 of the cluster.
D. This interface will not exist because J6350 routers have only six slots.
Answer: C

Juniper   JN0-330   JN0-330認証試験   JN0-330   JN0-330

NO.14 A route-based VPN is required for which scenario?
A. when the remote VPN peer is behind a NAT device
B. when multiple networks need to be reached across the tunnel
C. when the remote VPN peer is a dialup or remote access client
D. when a dynamic routing protocol such as OSPF is required across the VPN
Answer: D

Juniper   JN0-330   JN0-330   JN0-330

NO.15 Click the Exhibit button.
In the exhibit, which statement is correct?
A. Three physical interfaces are redundant.
B. You must define an additional Redundancy Group.
C. node 0 will immediately become primary in the cluster.
D. You must issue an operational command and reboot the system for the above configuration to take
effect.
Answer: D

Juniper練習問題   JN0-330   JN0-330   JN0-330   JN0-330

NO.16 Which command allows you to view the router's current priority for VRRP group 100 on interface
ge-0/0/1.0?
A. show vrrp
B. show vrrp group 100
C. show interfaces ge-0/0/1.0 vrrp group 100
D. show interfaces vrrp ge-0/0/1.0 group 100
Answer:A

Juniper認証試験   JN0-330   JN0-330   JN0-330参考書

NO.17 Which three security concerns can be addressed by a tunnel mode IPSec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer:ACE

Juniper   JN0-330   JN0-330   JN0-330練習問題   JN0-330

NO.18 You must configure a SCREEN option that would protect your router from a session table flood.
Which configuration meets this requirement?
A. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
icmp {
ip-sweep threshold 5000;
flood threshold 2000;
}
B. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
tcp {
syn-flood {
attack-threshold 2000;
destination-threshold 2000;
}
C. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
udp {
flood threshold 5000;
}
D. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
limit-session {
source-ip-based 1200;
destination-ip-based 1200;
}
Answer: D

Juniper   JN0-330認定資格   JN0-330   JN0-330   JN0-330

NO.19 Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and
network mask
of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This
host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to
make the HTTP service on the host reachable from the Internet.
On which IP address and TCP port can Internet hosts reach the HTTP service?
A. IP address 10.10.10.1 and TCP port 8080
B. IP address 71.33.252.17 and TCP port 80
C. IP address 71.33.251.19 and TCP port 80
D. IP address 71.33.252.19 and TCP port 8080
Answer: D

Juniper認定試験   JN0-330認定試験   JN0-330

NO.20 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections. How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D

Juniper   JN0-330   JN0-330問題集   JN0-330   JN0-330

NO.21 Click the Exhibit button.
Which type of source NAT is configured in the exhibit?
A. static source pool
B. interface source pool
C. source pool with PAT
D. souce pool without PAT
Answer:A

Juniper認定試験   JN0-330参考書   JN0-330認定証   JN0-330   JN0-330練習問題

NO.22 Which two are components of the JUNOS software's routing policy? (Choose two.)
A. route-map
B. prefix-list
C. distribute-list
D. policy-statement
Answer: BD

Juniper認定証   JN0-330問題集   JN0-330

NO.23 Click the Exhibit button.
In the exhibit, what is the priority for Router B in VRRP group 100?
A. 1
B. 100
C. 110
D. 255
Answer: B

Juniper過去問   JN0-330   JN0-330問題集

NO.24 Which three parameters are configured in the IKE policy? (Choose three.)
A. mode
B. preshared key
C. external interface
D. security proposals
E. dead peer detection settings
Answer: ABD

Juniper問題集   JN0-330練習問題   JN0-330

NO.25 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the router itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

Juniper過去問   JN0-330過去問   JN0-330過去問

NO.26 Which two are characteristics of link-state routing protocols? (Choose two.)
A. Routers choose a best path for a destination based on the SPF algorithm.
B. All routers in a given area or level build a consistent database describing the network's topology.
C. Routers choose the best path for a destination based on the interface on which they received the link
stateadvertisement with the lowest cost.
D. All routers in a given area or level forward link state advertisements between interfaces in the same
area or level,
adding their metric to the link state advertisement's cost information when they forward it.
Answer:AB

Juniper   JN0-330   JN0-330

NO.27 In JUNOS software with enhanced services, which three packet elements are inspected to determine
if a session
already exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer:ACE

Juniper認証試験   JN0-330認証試験   JN0-330過去問   JN0-330認定資格

NO.28 On which three traffic types does firewall pass-through authentication work? (Choose three.)
A. ping
B. FTP
C. Telnet
D. HTTP
E. HTTPS
Answer: BCD

Juniper   JN0-330認証試験   JN0-330   JN0-330問題集   JN0-330練習問題

NO.29 You want to enable SSH and Telnet access to the router's CLI. Under which configuration hierarchy
would you enable these protocols?
A. [edit system cli]
B. [edit security cli]
C. [edit system services]
D. [edit security services]
Answer: C

Juniper   JN0-330   JN0-330過去問

2014年3月26日星期三

Juniper JN0-522 JN0-532 JN0-560認定試験に適した最新問題集が登場

どのようにすればもっと楽にJuniperのJN0-522 JN0-532 JN0-560認定試験に合格することができるかについて考えたことがありますか。試験に合格する秘密を見つけましたか。それを行う方法がわからない場合、私は教えてあげましょう。実際には、認定試験に合格できる方法が多くあります。試験に関連する知識を一生懸命習得することがただ一つの方法です。今はそのようにしていますか。しかし、これが一番時間を無駄にして、望ましい効果を得られない方法です。それに、毎日仕事で忙しいあなたは、恐らく試験に準備する充分な時間がないでしょう。では、IT-Passports.comのJN0-522 JN0-532 JN0-560問題集を試しましょう。この試験参考書はきっとあなたに思えぬ良い結果を与えられます。

IT-Passports.comのJuniperのJN0-522 JN0-532 JN0-560試験トレーニング資料はIT認証試験を受ける人々の必需品です。このトレーニング資料を持っていたら、試験のために充分の準備をすることができます。そうしたら、試験に受かる信心も持つようになります。IT-Passports.comのJuniperのJN0-522 JN0-532 JN0-560試験トレーニング資料は特別に受験生を対象として研究されたものです。インターネットでこんな高品質の資料を提供するサイトはIT-Passports.comしかないです。

JuniperのJN0-522 JN0-532 JN0-560認定試験を受験したいですか。試験がたいへん難しいですから悩んでいるのですか。試験を申し込みたいですが、合格できないことが心配します。いまこのような気持ちを持っていますか。大丈夫ですよ。安心にJN0-522 JN0-532 JN0-560試験を申し込みましょう。IT-Passports.comの試験参考書を使用する限り、どんなに難しい試験でも問題にならないです。試験に合格する自信を全然持っていなくても、IT-Passports.comのJN0-522 JN0-532 JN0-560問題集はあなたが一度簡単に成功することを保証できます。不思議と思っていますか。では、IT-Passports.comのウェブサイトへ来てもっと多くの情報をブラウズすることもできます。それに、JN0-522 JN0-532 JN0-560問題集の一部を試用することもできます。そうすると、この参考書が確かにあなたが楽に試験に合格する保障ということをきっと知るようになります。

試験番号:JN0-522問題集
試験科目:Juniper 「FXV,Associate (JNCIA-FWV)」
問題と解答:全160問

試験番号:JN0-532問題集
試験科目:Juniper 「FWV,Specialist (JNCIS -FWV)」
問題と解答:全146問

試験番号:JN0-560問題集
試験科目:Juniper 「Certified Internet Associate.....」
問題と解答:全120問

まだJuniperのJN0-522 JN0-532 JN0-560認定試験を悩んでいますかこの情報の時代の中で専門なトレーニングを選択するのと思っていますか?良いターゲットのトレーニングを利用すれば有効で君のIT方面の大量の知識を補充 できます。JuniperのJN0-522 JN0-532 JN0-560認定試験によい準備ができて、試験に穏やかな心情をもって扱うことができます。IT-Passports.comの専門家が研究された問題集を利用してください。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/jn0-522.html

NO.1 Which command can you use to view the log of IKE negotiations and results?
A.get event type 536
B.get ike cookie
C.get sa active
D.debug ike basic
Answer:A

Juniper認定資格   JN0-522認定証   JN0-522   JN0-522   JN0-522   JN0-522

NO.2 You enter the following command: set int e0/8 mip 1.1.8.32 host 10.1.10.32 netmask 255.255.255.255
How many MIP address translations have you just configured?
A.1
B.8
C.128
D.256
Answer:A

Juniper認定証   JN0-522   JN0-522認証試験

NO.3 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer:A

Juniper   JN0-522認定証   JN0-522練習問題   JN0-522   JN0-522認定試験

NO.4 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer:A B

Juniper認定試験   JN0-522   JN0-522認定証   JN0-522練習問題

NO.5 Click the Exhibit button. In the exhibit, which routing command would allow host A to communicate with
host C? (Note: Assume a route from the SSG 20 to host A's subnet already exists.)
A.set route 0.0.0.0/0 int e0/3 gateway 177.11.56.254
B.set route 1.1.70.0 interface e0/3 gateway 177.11.56.254
C.configure route 1.1.70.0/24 gateway 177.11.56.254 int e0/3
D.set route 1.1.70.0/24 interface e0/3 gateway 177.11.56.254
Answer:D

Juniper   JN0-522過去問   JN0-522認定証   JN0-522認定証

NO.6 Which ScreenOS CLI command is required to enable a policy during specified times, days, or dates?
A.set time
B.set clock
C.set calendar
D.set scheduler
Answer:D

Juniper   JN0-522問題集   JN0-522   JN0-522

NO.7 Click the Exhibit button. Traffic from the Internet to the partner servers must use a VIP. In the exhibit,
what is true about the configuration of this feature?
A.You cannot use a VIP in this environment.
B.The VIP can be configured on the e0/4 interface.
C.The VIP can be configured in the Corporate or Internet zone using a different subnet than the physical
interface.
D.The VIP will work only if the destination ports in the incoming packet headers are mapped to the same
ports in the Corporate zone.
Answer:A

Juniper認定試験   JN0-522認定証   JN0-522   JN0-522認定試験

NO.8 Which ScreenOS CLI command would be useful for troubleshooting a policy deny?
A.get flow debug
B.debug flow basic
C.exec flow analysis
D.debug session basic
Answer:B

Juniper   JN0-522   JN0-522   JN0-522認定試験

NO.9 What needs to be configured in Phase 2 of a route-based VPN, that does not need to be configured in a
policy-based VPN?
A.proxy-id
B.tunnel-binding
C.transport mode
D.custom proposals
Answer:B

Juniper   JN0-522   JN0-522参考書   JN0-522問題集

NO.10 Click the Exhibit button. In the exhibit, if host A initiates a Web browsing session with host D, and the
E0/1 interface of the SSG 20 is in NAT mode, what will be the source address of the packet arriving at
host D?
A.10.1.1.1
B.10.1.10.5
C.143.45.56.1
D.143.45.56.254
Answer:C

Juniper問題集   JN0-522認定資格   JN0-522問題集   JN0-522

NO.11 Which ScreenOS CLI command would be used to view traffic logs?
A.get traffic
B.get log policy
C.get policy log
D.get log traffic
Answer:D

Juniper練習問題   JN0-522練習問題   JN0-522認定試験   JN0-522

NO.12 Click the Exhibit button. In the exhibit, what is the correct command to configure a default route on the
SSG 20?
A.set route 0.0.0.0/0 vrouter untrust
B.set route 0.0.0.0/0 interface e0/4 gateway 143.45.56.254
C.set route 0.0.0.0/0 interface e0/4 next-hop 143.45.56.254
D.set route 0.0.0.0/0 interface 143.45.56.1 gate 143.45.56.254
Answer:B

Juniper   JN0-522   JN0-522   JN0-522   JN0-522   JN0-522認証試験

NO.13 Click the Exhibit button. In the exhibit, what is the correct address book entry for host C?
A.set address C 1.1.70.250/32
B.set address Partner C 1.1.70.250
C.set address Partner 1.1.70.250/32
D.set address Partner C 1.1.70.250/32
Answer:D

Juniper   JN0-522   JN0-522練習問題   JN0-522   JN0-522認証試験

NO.14 You want to minimize the number of IP addresses, subnets, and policies in use. How should you
configure your tunnel interface?
A.Configure the tunnel interface with an IP address with a 32 bit subnet mask.
B.Configure the tunnel interface with an IP address with a 30 bit subnet mask.
C.Configure the tunnel interface as unnumbered and place the interface in the same zone as the
designated interface.
D.Configure the tunnel interface as unnumbered, but place the tunnel interface in a different zone than the
designated interface.
Answer:C

Juniper   JN0-522   JN0-522過去問   JN0-522

NO.15 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer:D

Juniper問題集   JN0-522   JN0-522認証試験   JN0-522認定資格

NO.16 Your VPN tunnel does not pass traffic. You run the get ike cookie command and discover that there is no
cookie. Which two should be verified? (Choose two.)
A.routes
B.Phase 1 configuration options
C.Phase 2 configuration options
D.selected quick mode encryption algorithms
Answer:A B

Juniper練習問題   JN0-522   JN0-522問題集   JN0-522参考書   JN0-522参考書

NO.17 Which statement is correct about tunnel interfaces?
A.They can have overlapping IP addresses.
B.They need to be configured in the zone where the protected resources reside.
C.They can be unnumbered and used in policy-based translations if the interface is in route mode.
D.They can be unnumbered from any interface residing on the same virtual router as the protected
resources.
Answer:D

Juniper   JN0-522問題集   JN0-522   JN0-522   JN0-522

NO.18 Assuming factory default settings, which statement describes the minimum requirements for WebUI
management access to the SSG 5?
A.Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access
192.168.1.1.
B.Terminate the bootup sequence from the console device, open a browser on the console device and
access 192.168.1.1.
C.Connect a PC addressed on the 192.168.1.0 subnet, to the highest numbered interface and open a
browser and access 192.168.1.1.
D.Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a
browser to the interface address.
Answer:C

Juniper認証試験   JN0-522問題集   JN0-522   JN0-522   JN0-522認定証   JN0-522認定資格

NO.19 Which ScreenOS CLI policy statement keyword would enable a policy only during specified times, days,
and/or dates?
A.at
B.calendar
C.schedule
D.scheduler
Answer:C

Juniper   JN0-522   JN0-522過去問   JN0-522認定資格

NO.20 Click the Exhibit button. In the exhibit, which two forms of address translation would have generated
the output shown? (Choose two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer:B C

Juniper参考書   JN0-522認定試験   JN0-522

2014年2月17日星期一

JuniperのJN0-532認証試験の最新の訓練の手引き

IT-Passports.comは実環境であなたの本当のJuniper JN0-532試験に準備するプロセスを見つけられます。もしあなたが初心者だったら、または自分の知識や専門的なスキルを高めたいのなら、IT-Passports.comのJuniperのJN0-532問題集があなたを助けることができ、一歩一歩でその念願を実現することにヘルプを差し上げます。IT-Passports.comのJuniperのJN0-532は試験に関する全ての質問が解決して差し上げられます。それに一年間の無料更新サービスを提供しますから、IT-Passports.comのウェブサイトをご覧ください。

IT-Passports.comのJuniperのJN0-532試験問題集を購入したら、あなたは人生の最も重要な試験準備のことを実現できます。あなたは最高のトレーニング資料を手に入れました。IT-Passports.comの製品を買ったら、あなた自身のために成功への扉を開きました。あなたは最も小さな努力で最大の成功を取ることができます。

Juniperの認定試験は最近ますます人気があるようになっています。IT認定試験は様々あります。どの試験を受験したことがありますか。たとえばJN0-532認定試験などです。これらは全部大切な試験です。どちらを受験したいですか。ここで言いたいのはJN0-532試験です。この試験を受けたいなら、IT-Passports.comのJN0-532問題集はあなたが楽に試験に合格するのを助けられます。

JN0-532認定試験の準備をするために一生懸命勉強して疲れを感じるときには、他の人が何をしているかを知っていますか。あなたと同じIT認定試験を受験する周りの人を見てください。あなたが試験のために不安と感じているとき、どうして他の人が自信満々で、のんびり見ているのでしょうか。あなたの能力は彼らうより弱いですか。もちろんそんなことはないです。では、なぜ他の人が簡単にJN0-532試験に合格することができるかを知りたいですか。それは彼らがIT-Passports.com のJN0-532問題集を利用したからです。この問題集を勉強することだけで楽に試験に合格することができます。信じないのですか。不思議を思っていますか。では、急いで試してください。まず問題集のdemoを体験することができます。そうすれば、この問題集の品質を確認することができます。はやくIT-Passports.comのサイトをクリックしてください。

IT-Passports.comはJuniperのJN0-532認定試験にたいして短期で有効なウェブサイトでJN0-532認定試験に合格するのを保証したり、Juniper認証試験に合格しなければ全額で返金いたします。あなたはIT-Passports.comが提供したJN0-532の認証試験の問題集を購入するの前にインターネットで無料な試用版をダウンロードしてください。

試験番号:JN0-532問題集
試験科目:Juniper 「FWV,Specialist (JNCIS -FWV)」
問題と解答:全146問

JuniperのJN0-532認定試験に受かるのはあなたの技能を検証することだけでなく、あなたの専門知識を証明できて、上司は無駄にあなたを雇うことはしないことの証明書です。当面、IT業界でJuniperのJN0-532認定試験の信頼できるソースが必要です。IT-Passports.comはとても良い選択で、JN0-532の試験を最も短い時間に縮められますから、あなたの費用とエネルギーを節約することができます。それに、あなたに美しい未来を作ることに助けを差し上げられます。

あなたはIT職員ですか。今年で一番人気があるIT認証試験に申し込みましたか。もし「はい」と答えてくれたら、あなたはラッキですよ。IT-Passports.comのJuniperのJN0-532トレーニング資料はあなたが100パーセント試験に合格することを保証しますから。これは絶対に真実なことです。IT業種でより高いレベルに行きたいのなら、IT-Passports.comを選ぶのは間違いなく選択です。当社のトレーニング資料はあなたが全てのIT認証試験に合格することを助けます。しかも値段が手頃です。信じないことはしないでください。IT-Passports.comを利用したら分かります。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-532.html

NO.1 Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A.NAT-traversal is enabled.
B.The rekey interval is 8 hours.
C.This device initiated the Phase 1 negotiations.
D.The certificate used in this exchange is set to never expire.
Answer: BC

Juniper   JN0-532参考書   JN0-532過去問

NO.2 You have configured the following on your device.
set address trust MyPC 10.1.1.5/32
set address untrust CorpNet 10.10.0.0/16
set policy from trust to untrust MyPC CorpNet any permit
set int tunnel.1 zone untrust
set int tunnel.1 ip unnumbered int bgroup1
set ike gateway GW address 1.1.1.1 outgoing-interface e0/1 preshare Secret sec-level standard
set vpn VPN gateway GW sec-level standard
The tunnel interface is down, so the VPN cannot function properly. What is the problem?
A.The policy needs to have the action tunnel.
B.The VPN needs to be bound to the tunnel interface.
C.The tunnel interface needs to be placed in the trust zone.
D.The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper問題集   JN0-532   JN0-532   JN0-532認証試験   JN0-532認証試験

NO.3 You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS
using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A.The router will be the default router but will no longer be shared.
B.The router will be the default router and will still have a shareable status.
C.The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual
router must be private.
D.The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router.
The shared Virtual router will not be the default router.
Answer: B

Juniper練習問題   JN0-532   JN0-532   JN0-532   JN0-532

NO.4 Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in
the cluster:
Why has failover not occurred?
A.The physical interfaces have not failed.
B.The track-ip interval is not sufficient to cause failover.
C.The track-ip address weight is not sufficient to cause failover.
D.The track-ip address threshold is not sufficient to cause failover.
Answer: C

Juniper認証試験   JN0-532認定試験   JN0-532参考書   JN0-532過去問

NO.5 What must be enabled to protect Phase 2 key exchanges?
A.Phase 1 PFS
B.Phase 2 SHA
C.Phase 2 3-DES
D.Phase 2 DH key exchange tiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: D

Juniper   JN0-532認定証   JN0-532認証試験   JN0-532

NO.6 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A.236.1.1.1
B.10.10.10.1
C.20.20.20.10
D.20.20.20.200
Answer: B

Juniper過去問   JN0-532認定資格   JN0-532   JN0-532

NO.7 Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling
from spoke to spoke. Which two of the following configuration options will meet this requirement?
(Choose two.)
A.Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B.Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C.Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D.Create separate tunnel interfaces at the hub and place them in different zones, then create policies at
the hub.
Answer: BD

Juniper認定試験   JN0-532   JN0-532問題集   JN0-532認定試験

NO.8 Which command is used to verify that IGMP is running correctly?
A.get route igmp
B.get igmp query
C.set igmp query interface e0/1
D.exec igmp interface e0/1 query
Answer: D

Juniper   JN0-532認証試験   JN0-532   JN0-532

NO.9 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A.messages 1 & 2
B.messages 2 & 3
C.messages 3 & 4
D.messages 5 & 6
Answer: D

Juniper   JN0-532過去問   JN0-532   JN0-532

NO.10 Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to
the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched
to DataCenter2.
Which statement explains this behavior?
A.SYN checking is enabled in the tunnel.
B.The weight value for the DataCenter2 is too high.
C.VPN monitor is misconfigured in the DataCenter2.
D.Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

Juniper   JN0-532参考書   JN0-532認定試験

NO.11 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A.set igmp interface ethernet0/1
B.set multicast interface ethernet0/1
C.set interface ethernet0/1 igmp router
D.set igmp interface ethernet0/1 enable
Answer: C

Juniper   JN0-532   JN0-532認定試験   JN0-532認証試験

NO.12 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A.get route pim
B.get igmp source all
C.exec pim interface all query
D.get vrouter trust-vr protocol pim
Answer: D

Juniper認定試験   JN0-532   JN0-532認定証   JN0-532参考書

NO.13 Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A.234.9.8.42
B.192.168.10.2
C.192.168.20.10
D.192.168.20.200
Answer: D

Juniper   JN0-532   JN0-532   JN0-532問題集

NO.14 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: AD

Juniper過去問   JN0-532認定資格   JN0-532   JN0-532

NO.15 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A.zone
B.policy
C.interface
D.virtual router
E.virtual system
Answer: ACD

Juniper   JN0-532   JN0-532   JN0-532問題集

NO.16 Which three OSPF parameters are interface parameters? (Choose three.)
A.cost
B.priority
C.neighbor list
D.summarization
E.advertise default route
Answer: ABC

Juniper認証試験   JN0-532問題集   JN0-532

NO.17 You have entered the command set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be
captured
B.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be
captured
C.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will
be captured
D.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will
be captured
Answer: C

Juniper   JN0-532参考書   JN0-532練習問題   JN0-532参考書   JN0-532認証試験

NO.18 Which three statements are true regarding IKE Phase 1? (Choose three.)
A.Placing the SA proposal list in message 1 is an option.
B.The digital certificate is used to decrypt the session key.
C.The DH key exchange is used to validate the session key.
D.The DH key exchange and digital certificates are both optional.
E.The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper問題集   JN0-532認定試験   JN0-532

NO.19 What must be configured differently for a route-based VPN and a policy-based VPN?
A.proxy-id
B.proposals
C.remote gateway type
D.binding the tunnel interface
Answer: D

Juniper問題集   JN0-532問題集   JN0-532   JN0-532   JN0-532認定証

NO.20 Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support
PIM-SM? (Choose two)
A.A multicast control policy
B.A bootstrap router process
C.A unicast routing protocol
D.A static RP
Answer: AC

Juniper   JN0-532   JN0-532   JN0-532問題集

IT-Passports.comは客様の要求を満たせていい評判をうけいたします。たくさんのひとは弊社の商品を使って、試験に順調に合格しました。

2014年2月5日星期三

JuniperのJN0-532認定試験に合格できないなんて心配無用

まだJuniperのJN0-532認定試験を悩んでいますかこの情報の時代の中で専門なトレーニングを選択するのと思っていますか?良いターゲットのトレーニングを利用すれば有効で君のIT方面の大量の知識を補充 できます。JuniperのJN0-532認定試験によい準備ができて、試験に穏やかな心情をもって扱うことができます。IT-Passports.comの専門家が研究された問題集を利用してください。

JN0-532認定試験はIT業界の新たなターニングポイントの一つです。試験に受かったら、あなたはIT業界のエリートになることができます。情報技術の進歩と普及につれて、JuniperのJN0-532問題集と解答を提供するオンライン·リソースが何百現れています。その中で、IT-Passports.comが他のサイトをずっと先んじてとても人気があるのは、IT-Passports.comのJuniperのJN0-532試験トレーニング資料が本当に人々に恩恵をもたらすことができて、速く自分の夢を実現することにヘルプを差し上げられますから。

今の多士済々な社会の中で、IT専門人士はとても人気がありますが、競争も大きいです。だからいろいろな方は試験を借って、自分の社会の地位を固めたいです。JN0-532認定試験はJuniperの中に重要な認証試験の一つですが、IT-Passports.comにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってJuniper JN0-532認証試験に参加する方に対して問題集を研究続けています。

JuniperのJN0-532の認証試験は現在IT業界でもっとも人気があって、その試験に合格すれば君の生活と仕事にいいです。 IT-Passports.comはJuniperのJN0-532の認証試験の合格率を高めるのウエブサイトで、IT-Passports.com中のIT業界の専門家が研究を通じてJuniperのJN0-532の認証試験について問題集を研究し続けています。100%合格率は彼らの研究成果でございます。IT-Passports.comを選られば、成功しましょう。

試験番号:JN0-532問題集
試験科目:Juniper 「FWV,Specialist (JNCIS -FWV)」
問題と解答:全146問

IT-Passports.comのJN0-532問題集を利用してみたらどうですか。この問題集は最近更新されたもので、実際試験で出題される可能性がある問題をすべて含んでいて、あなたが一回で成功することを保証できますから。この問題集は信じられないほどの良い成果を見せます。試験に失敗すればIT-Passports.comは全額返金のことができますから、ご安心に問題集を利用してください。IT-Passports.comのJN0-532試験参考書できっとあなたが望ましい成功を取られます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-532.html

NO.1 Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in
the cluster:
Why has failover not occurred?
A.The physical interfaces have not failed.
B.The track-ip interval is not sufficient to cause failover.
C.The track-ip address weight is not sufficient to cause failover.
D.The track-ip address threshold is not sufficient to cause failover.
Answer: C

Juniper参考書   JN0-532   JN0-532認定資格   JN0-532過去問   JN0-532

NO.2 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A.get route pim
B.get igmp source all
C.exec pim interface all query
D.get vrouter trust-vr protocol pim
Answer: D

Juniper認定資格   JN0-532認定試験   JN0-532認定資格   JN0-532参考書

NO.3 What must be configured differently for a route-based VPN and a policy-based VPN?
A.proxy-id
B.proposals
C.remote gateway type
D.binding the tunnel interface
Answer: D

Juniper練習問題   JN0-532   JN0-532練習問題

NO.4 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: AD

Juniper   JN0-532認証試験   JN0-532過去問

NO.5 Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling
from spoke to spoke. Which two of the following configuration options will meet this requirement?
(Choose two.)
A.Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B.Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C.Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D.Create separate tunnel interfaces at the hub and place them in different zones, then create policies at
the hub.
Answer: BD

Juniper   JN0-532   JN0-532

NO.6 You have configured the following on your device.
set address trust MyPC 10.1.1.5/32
set address untrust CorpNet 10.10.0.0/16
set policy from trust to untrust MyPC CorpNet any permit
set int tunnel.1 zone untrust
set int tunnel.1 ip unnumbered int bgroup1
set ike gateway GW address 1.1.1.1 outgoing-interface e0/1 preshare Secret sec-level standard
set vpn VPN gateway GW sec-level standard
The tunnel interface is down, so the VPN cannot function properly. What is the problem?
A.The policy needs to have the action tunnel.
B.The VPN needs to be bound to the tunnel interface.
C.The tunnel interface needs to be placed in the trust zone.
D.The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper   JN0-532   JN0-532

NO.7 Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A.NAT-traversal is enabled.
B.The rekey interval is 8 hours.
C.This device initiated the Phase 1 negotiations.
D.The certificate used in this exchange is set to never expire.
Answer: BC

Juniper   JN0-532過去問   JN0-532過去問   JN0-532認定試験

NO.8 You have entered the command set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be
captured
B.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be
captured
C.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will
be captured
D.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will
be captured
Answer: C

Juniper   JN0-532認定試験   JN0-532参考書   JN0-532練習問題

NO.9 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A.set igmp interface ethernet0/1
B.set multicast interface ethernet0/1
C.set interface ethernet0/1 igmp router
D.set igmp interface ethernet0/1 enable
Answer: C

Juniper認定資格   JN0-532   JN0-532

NO.10 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A.messages 1 & 2
B.messages 2 & 3
C.messages 3 & 4
D.messages 5 & 6
Answer: D

Juniper参考書   JN0-532   JN0-532   JN0-532過去問   JN0-532

NO.11 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A.236.1.1.1
B.10.10.10.1
C.20.20.20.10
D.20.20.20.200
Answer: B

Juniper参考書   JN0-532認定証   JN0-532練習問題   JN0-532過去問   JN0-532

NO.12 Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support
PIM-SM? (Choose two)
A.A multicast control policy
B.A bootstrap router process
C.A unicast routing protocol
D.A static RP
Answer: AC

Juniper練習問題   JN0-532   JN0-532

NO.13 Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to
the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched
to DataCenter2.
Which statement explains this behavior?
A.SYN checking is enabled in the tunnel.
B.The weight value for the DataCenter2 is too high.
C.VPN monitor is misconfigured in the DataCenter2.
D.Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

Juniper過去問   JN0-532過去問   JN0-532

NO.14 What must be enabled to protect Phase 2 key exchanges?
A.Phase 1 PFS
B.Phase 2 SHA
C.Phase 2 3-DES
D.Phase 2 DH key exchange tiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: D

Juniper認定証   JN0-532認定試験   JN0-532認定試験   JN0-532

NO.15 Which three OSPF parameters are interface parameters? (Choose three.)
A.cost
B.priority
C.neighbor list
D.summarization
E.advertise default route
Answer: ABC

Juniper認定試験   JN0-532練習問題   JN0-532参考書

NO.16 You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS
using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A.The router will be the default router but will no longer be shared.
B.The router will be the default router and will still have a shareable status.
C.The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual
router must be private.
D.The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router.
The shared Virtual router will not be the default router.
Answer: B

Juniper   JN0-532認証試験   JN0-532   JN0-532

NO.17 Which three statements are true regarding IKE Phase 1? (Choose three.)
A.Placing the SA proposal list in message 1 is an option.
B.The digital certificate is used to decrypt the session key.
C.The DH key exchange is used to validate the session key.
D.The DH key exchange and digital certificates are both optional.
E.The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper認定証   JN0-532練習問題   JN0-532認定資格   JN0-532認証試験   JN0-532

NO.18 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A.zone
B.policy
C.interface
D.virtual router
E.virtual system
Answer: ACD

Juniper過去問   JN0-532参考書   JN0-532   JN0-532

NO.19 Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A.234.9.8.42
B.192.168.10.2
C.192.168.20.10
D.192.168.20.200
Answer: D

Juniper認定資格   JN0-532参考書   JN0-532認証試験

NO.20 Which command is used to verify that IGMP is running correctly?
A.get route igmp
B.get igmp query
C.set igmp query interface e0/1
D.exec igmp interface e0/1 query
Answer: D

Juniper問題集   JN0-532   JN0-532認定証   JN0-532認証試験   JN0-532   JN0-532問題集

従来の試験によってIT-Passports.com が今年のJuniperのJN0-532認定試験を予測してもっとも真実に近い問題集を研究し続けます。IT-Passports.comは100%でJuniperのJN0-532認定試験に合格するのを保証いたします。

2014年1月5日星期日

Juniper JN0-532認定資格を取得できる試験参考書

IT-Passports.com のJuniperのJN0-532問題集は最も徹底的で、最も正確で、かつアップ·ツー·デートなものです。当面の市場であなたに初めて困難を乗り越える信心を差し上げられるユニークなソフトです。JuniperのJN0-532認証試験は世界でどの国でも承認されて、すべての国が分け隔てをしないの試験です。IT-Passports.com のJuniperのJN0-532認証証明書はあなたが自分の知識と技能を高めることに助けになれることだけでなく、さまざまな条件であなたのキャリアを助けることもできます。IT-Passports.com のJuniperのJN0-532問題集を利用することをお勧めいたします。

IT-Passports.comは異なるトレーニングツールと資源を提供してあなたのJuniperのJN0-532の認証試験の準備にヘルプを差し上げます。編成チュートリアルは授業コース、実践検定、試験エンジンと一部の無料なPDFダウンロードを含めています。

人々はそれぞれ自分の人生計画があります。違った選択をしたら違った結果を取得しますから、選択は非常に重要なことです。IT-Passports.comのJuniperのJN0-532試験トレーニング資料はIT職員が自分の高い目標を達成することを助けます。この資料は問題と解答に含まれていて、実際の試験問題と殆ど同じで、最高のトレーニング資料とみなすことができます。

「あきらめたら そこで試合終了ですよ」という『スラムダンク』の中の安西監督が言った名言があります。この文は人々に知られています。試合と同じ、試験もそのどおりですよ。試験に準備する時間が十分ではないから、JN0-532認定試験を諦めた人がたくさんいます。しかし、優秀な資料を利用すれば、短時間の準備をしても、高得点で試験に合格することができます。信じないでしょうか。IT-Passports.comの試験問題集はそのような資料ですよ。はやく試してください。

試験番号:JN0-532問題集
試験科目:Juniper 「FWV,Specialist (JNCIS -FWV)」
問題と解答:全146問

IT-Passports.comのJN0-532問題集は素晴らしい参考資料です。この問題集は絶対あなたがずっと探しているものです。これは受験生の皆さんのために特別に作成し出された試験参考書です。この参考書は短い時間で試験に十分に準備させ、そして楽に試験に合格させます。試験のためにあまりの時間と精力を無駄にしたくないなら、IT-Passports.comのJN0-532問題集は間違いなくあなたに最もふさわしい選択です。この資料を使用すると、あなたの学習効率を向上させ、多くの時間を節約することができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-532.html

NO.1 Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in
the cluster:
Why has failover not occurred?
A.The physical interfaces have not failed.
B.The track-ip interval is not sufficient to cause failover.
C.The track-ip address weight is not sufficient to cause failover.
D.The track-ip address threshold is not sufficient to cause failover.
Answer: C

Juniper   JN0-532問題集   JN0-532   JN0-532認証試験

NO.2 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A.messages 1 & 2
B.messages 2 & 3
C.messages 3 & 4
D.messages 5 & 6
Answer: D

Juniper過去問   JN0-532   JN0-532   JN0-532   JN0-532

NO.3 What must be configured differently for a route-based VPN and a policy-based VPN?
A.proxy-id
B.proposals
C.remote gateway type
D.binding the tunnel interface
Answer: D

Juniper   JN0-532認証試験   JN0-532   JN0-532

NO.4 Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling
from spoke to spoke. Which two of the following configuration options will meet this requirement?
(Choose two.)
A.Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B.Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C.Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D.Create separate tunnel interfaces at the hub and place them in different zones, then create policies at
the hub.
Answer: BD

Juniper   JN0-532   JN0-532   JN0-532問題集   JN0-532   JN0-532練習問題

NO.5 Which three OSPF parameters are interface parameters? (Choose three.)
A.cost
B.priority
C.neighbor list
D.summarization
E.advertise default route
Answer: ABC

Juniper   JN0-532   JN0-532   JN0-532

NO.6 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A.set igmp interface ethernet0/1
B.set multicast interface ethernet0/1
C.set interface ethernet0/1 igmp router
D.set igmp interface ethernet0/1 enable
Answer: C

Juniper問題集   JN0-532参考書   JN0-532認定試験   JN0-532   JN0-532認定資格

NO.7 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: AD

Juniper練習問題   JN0-532   JN0-532認証試験   JN0-532   JN0-532参考書   JN0-532練習問題

NO.8 You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS
using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A.The router will be the default router but will no longer be shared.
B.The router will be the default router and will still have a shareable status.
C.The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual
router must be private.
D.The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router.
The shared Virtual router will not be the default router.
Answer: B

Juniper   JN0-532過去問   JN0-532   JN0-532

NO.9 Which command is used to verify that IGMP is running correctly?
A.get route igmp
B.get igmp query
C.set igmp query interface e0/1
D.exec igmp interface e0/1 query
Answer: D

Juniper   JN0-532問題集   JN0-532   JN0-532練習問題   JN0-532

NO.10 What must be enabled to protect Phase 2 key exchanges?
A.Phase 1 PFS
B.Phase 2 SHA
C.Phase 2 3-DES
D.Phase 2 DH key exchange tiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: D

Juniper認証試験   JN0-532   JN0-532

NO.11 Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support
PIM-SM? (Choose two)
A.A multicast control policy
B.A bootstrap router process
C.A unicast routing protocol
D.A static RP
Answer: AC

Juniper問題集   JN0-532認定資格   JN0-532練習問題   JN0-532認定試験

NO.12 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A.zone
B.policy
C.interface
D.virtual router
E.virtual system
Answer: ACD

Juniper練習問題   JN0-532認定資格   JN0-532

NO.13 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A.236.1.1.1
B.10.10.10.1
C.20.20.20.10
D.20.20.20.200
Answer: B

Juniper認定証   JN0-532   JN0-532

NO.14 Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to
the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched
to DataCenter2.
Which statement explains this behavior?
A.SYN checking is enabled in the tunnel.
B.The weight value for the DataCenter2 is too high.
C.VPN monitor is misconfigured in the DataCenter2.
D.Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

Juniper認定資格   JN0-532認定資格   JN0-532   JN0-532

NO.15 Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A.234.9.8.42
B.192.168.10.2
C.192.168.20.10
D.192.168.20.200
Answer: D

Juniper   JN0-532認証試験   JN0-532過去問   JN0-532

NO.16 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A.get route pim
B.get igmp source all
C.exec pim interface all query
D.get vrouter trust-vr protocol pim
Answer: D

Juniper認定証   JN0-532   JN0-532認定試験

NO.17 Which three statements are true regarding IKE Phase 1? (Choose three.)
A.Placing the SA proposal list in message 1 is an option.
B.The digital certificate is used to decrypt the session key.
C.The DH key exchange is used to validate the session key.
D.The DH key exchange and digital certificates are both optional.
E.The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper認証試験   JN0-532   JN0-532練習問題   JN0-532過去問   JN0-532   JN0-532認証試験

NO.18 Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A.NAT-traversal is enabled.
B.The rekey interval is 8 hours.
C.This device initiated the Phase 1 negotiations.
D.The certificate used in this exchange is set to never expire.
Answer: BC

Juniper認定資格   JN0-532   JN0-532   JN0-532

NO.19 You have entered the command set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be
captured
B.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be
captured
C.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will
be captured
D.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will
be captured
Answer: C

Juniper   JN0-532   JN0-532   JN0-532

NO.20 You have configured the following on your device.
set address trust MyPC 10.1.1.5/32
set address untrust CorpNet 10.10.0.0/16
set policy from trust to untrust MyPC CorpNet any permit
set int tunnel.1 zone untrust
set int tunnel.1 ip unnumbered int bgroup1
set ike gateway GW address 1.1.1.1 outgoing-interface e0/1 preshare Secret sec-level standard
set vpn VPN gateway GW sec-level standard
The tunnel interface is down, so the VPN cannot function properly. What is the problem?
A.The policy needs to have the action tunnel.
B.The VPN needs to be bound to the tunnel interface.
C.The tunnel interface needs to be placed in the trust zone.
D.The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper   JN0-532練習問題   JN0-532

IT-Passports.comはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がIT-Passports.comの問題集を使うので試験に合格しますた。彼らはIT-Passports.comの問題集が有効なこと確認しました。IT-Passports.comが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。

2013年10月21日星期一

いま安心でJuniper JN0-532認定試験を受験することができる

IT-Passports.comのJuniperのJN0-532試験トレーニング資料は必要とするすべての人に成功をもたらすことができます。JuniperのJN0-532試験は挑戦がある認定試験です。現在、書籍の以外にインターネットは知識の宝庫として見られています。IT-Passports.com で、あなたにあなたの宝庫を見つけられます。IT-Passports.com はJuniperのJN0-532試験に関連する知識が全部含まれていますから、あなたにとって難しい問題を全て解決して差し上げます。

JN0-532試験はJuniperのひとつの認証試験でIT業界でとても歓迎があって、ますます多くの人がJN0-532認証試験に申し込んですがその認証試験が簡単に合格できません。準備することが時間と労力がかかります。でも、IT-Passports.comは君の多くの貴重な時間とエネルギーを節約することを助けることができます。

JuniperのJN0-532認定試験は現在で本当に人気がある試験ですね。まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。では、まだ試験に合格するショートカットがわからないあなたは、受験のテクニックを知りたいですか。今教えてあげますよ。IT-Passports.comのJN0-532問題集を利用することです。

試験番号:JN0-532問題集
試験科目:Juniper 「FWV,Specialist (JNCIS -FWV)」
問題と解答:全146問

IT-Passports.comの経験豊富な専門家チームはJuniperのJN0-532認定試験に向かって専門性の問題集を作って、とても受験生に合っています。IT-Passports.comの商品はIT業界中で高品質で低価格で君の試験のために専門に研究したものでございます。

あなたの人生に残念と後悔を残しないように、私たちはできるだけ人生を変えるあらゆるチャンスをつかむ必要があります。あなたはそれをやったことができましたか。IT-Passports.comのJuniperのJN0-532試験トレーニング資料は成功したいIT職員のために作成されたのです。あなたがJuniperのJN0-532認定試験に合格することを助けます。成功と擦れ違うことを避けるように速く行動しましょう。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-532.html

NO.1 Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling
from spoke to spoke. Which two of the following configuration options will meet this requirement?
(Choose two.)
A.Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B.Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C.Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D.Create separate tunnel interfaces at the hub and place them in different zones, then create policies at
the hub.
Answer: BD

Juniper   JN0-532   JN0-532   JN0-532   JN0-532   JN0-532認定証

NO.2 Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to
the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched
to DataCenter2.
Which statement explains this behavior?
A.SYN checking is enabled in the tunnel.
B.The weight value for the DataCenter2 is too high.
C.VPN monitor is misconfigured in the DataCenter2.
D.Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

Juniper   JN0-532過去問   JN0-532   JN0-532   JN0-532

NO.3 Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support
PIM-SM? (Choose two)
A.A multicast control policy
B.A bootstrap router process
C.A unicast routing protocol
D.A static RP
Answer: AC

Juniper過去問   JN0-532練習問題   JN0-532認定試験

NO.4 You have entered the command set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be
captured
B.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be
captured
C.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will
be captured
D.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will
be captured
Answer: C

Juniper問題集   JN0-532過去問   JN0-532   JN0-532   JN0-532

NO.5 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A.messages 1 & 2
B.messages 2 & 3
C.messages 3 & 4
D.messages 5 & 6
Answer: D

Juniper認証試験   JN0-532   JN0-532   JN0-532参考書

NO.6 You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS
using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A.The router will be the default router but will no longer be shared.
B.The router will be the default router and will still have a shareable status.
C.The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual
router must be private.
D.The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router.
The shared Virtual router will not be the default router.
Answer: B

Juniper参考書   JN0-532認証試験   JN0-532   JN0-532認証試験   JN0-532

NO.7 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A.get route pim
B.get igmp source all
C.exec pim interface all query
D.get vrouter trust-vr protocol pim
Answer: D

Juniper   JN0-532   JN0-532過去問   JN0-532

NO.8 What must be enabled to protect Phase 2 key exchanges?
A.Phase 1 PFS
B.Phase 2 SHA
C.Phase 2 3-DES
D.Phase 2 DH key exchange tiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: D

Juniper   JN0-532   JN0-532認定資格   JN0-532練習問題   JN0-532

NO.9 You have configured the following on your device.
set address trust MyPC 10.1.1.5/32
set address untrust CorpNet 10.10.0.0/16
set policy from trust to untrust MyPC CorpNet any permit
set int tunnel.1 zone untrust
set int tunnel.1 ip unnumbered int bgroup1
set ike gateway GW address 1.1.1.1 outgoing-interface e0/1 preshare Secret sec-level standard
set vpn VPN gateway GW sec-level standard
The tunnel interface is down, so the VPN cannot function properly. What is the problem?
A.The policy needs to have the action tunnel.
B.The VPN needs to be bound to the tunnel interface.
C.The tunnel interface needs to be placed in the trust zone.
D.The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper   JN0-532認証試験   JN0-532練習問題   JN0-532参考書

NO.10 Which three OSPF parameters are interface parameters? (Choose three.)
A.cost
B.priority
C.neighbor list
D.summarization
E.advertise default route
Answer: ABC

Juniper問題集   JN0-532過去問   JN0-532   JN0-532   JN0-532認定証

NO.11 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A.zone
B.policy
C.interface
D.virtual router
E.virtual system
Answer: ACD

Juniper認定試験   JN0-532認定資格   JN0-532認証試験   JN0-532練習問題

NO.12 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A.236.1.1.1
B.10.10.10.1
C.20.20.20.10
D.20.20.20.200
Answer: B

Juniper認定資格   JN0-532認定資格   JN0-532問題集   JN0-532   JN0-532

NO.13 Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in
the cluster:
Why has failover not occurred?
A.The physical interfaces have not failed.
B.The track-ip interval is not sufficient to cause failover.
C.The track-ip address weight is not sufficient to cause failover.
D.The track-ip address threshold is not sufficient to cause failover.
Answer: C

Juniper認定資格   JN0-532過去問   JN0-532問題集   JN0-532   JN0-532

NO.14 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: AD

Juniper   JN0-532   JN0-532認証試験   JN0-532   JN0-532

NO.15 Which three statements are true regarding IKE Phase 1? (Choose three.)
A.Placing the SA proposal list in message 1 is an option.
B.The digital certificate is used to decrypt the session key.
C.The DH key exchange is used to validate the session key.
D.The DH key exchange and digital certificates are both optional.
E.The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper認証試験   JN0-532   JN0-532認定試験   JN0-532認定資格

NO.16 Which command is used to verify that IGMP is running correctly?
A.get route igmp
B.get igmp query
C.set igmp query interface e0/1
D.exec igmp interface e0/1 query
Answer: D

Juniper参考書   JN0-532認定試験   JN0-532   JN0-532

NO.17 Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A.NAT-traversal is enabled.
B.The rekey interval is 8 hours.
C.This device initiated the Phase 1 negotiations.
D.The certificate used in this exchange is set to never expire.
Answer: BC

Juniper認定試験   JN0-532   JN0-532問題集   JN0-532

NO.18 Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A.234.9.8.42
B.192.168.10.2
C.192.168.20.10
D.192.168.20.200
Answer: D

Juniper   JN0-532認定試験   JN0-532   JN0-532過去問   JN0-532認定証

NO.19 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A.set igmp interface ethernet0/1
B.set multicast interface ethernet0/1
C.set interface ethernet0/1 igmp router
D.set igmp interface ethernet0/1 enable
Answer: C

Juniper参考書   JN0-532   JN0-532問題集

NO.20 What must be configured differently for a route-based VPN and a policy-based VPN?
A.proxy-id
B.proposals
C.remote gateway type
D.binding the tunnel interface
Answer: D

Juniper   JN0-532   JN0-532   JN0-532認定試験   JN0-532

弊社の商品は試験の範囲を広くカバーすることが他のサイトがなかなか及ばならないです。それほかに品質はもっと高くてJuniperのJN0-532認定試験の受験生が最良の選択であり、成功の最高の保障でございます。