显示标签为“JN0-560”的博文。显示所有博文
显示标签为“JN0-560”的博文。显示所有博文

2014年3月29日星期六

IT-Passports.comはJuniper JN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330試験の実践訓練を提供する

IT-Passports.comのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330問題集は素晴らしい参考資料です。この問題集は絶対あなたがずっと探しているものです。これは受験生の皆さんのために特別に作成し出された試験参考書です。この参考書は短い時間で試験に十分に準備させ、そして楽に試験に合格させます。試験のためにあまりの時間と精力を無駄にしたくないなら、IT-Passports.comのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330問題集は間違いなくあなたに最もふさわしい選択です。この資料を使用すると、あなたの学習効率を向上させ、多くの時間を節約することができます。

あなたのキャリアでいま挑戦に直面していますか。自分のスキルを向上させ、よりよく他の人に自分の能力を証明したいですか。昇進する機会を得たいですか。そうすると、はやくJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330認定試験を申し込んで認証資格を取りましょう。Juniperの認定試験はIT領域における非常に大切な試験です。JuniperJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330認証資格を取得すると、あなたは大きなヘルプを得ることができます。では、どのようにはやく試験に合格するかを知りたいですか。IT-Passports.comのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330参考資料はあなたの目標を達成するのに役立ちます。

もちろん、試験に関連する資料を探しているとき、他の様々な資料を見つけることができます。しかし、調査や自分自身の試用の後、IT-Passports.comのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330問題集が試験の準備ツールに最適であることはわかります。IT-Passports.comの資料は試験に準備する時間が十分ではない受験生のために特別に開発されるものです。それはあなたを試験に準備するときにより多くの時間を節約させます。しかも、IT-Passports.comのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330問題集はあなたが一回で試験に合格することを保証します。また、問題集は随時更新されていますから、試験の内容やシラバスが変更されたら、IT-Passports.comは最新ニュースを与えることができます。

試験番号:JN0-331問題集
試験科目:Juniper 「SEC,Specialist(JNCIS-SEC)」
問題と解答:全131問

試験番号:JN0-522問題集
試験科目:Juniper 「FXV,Associate (JNCIA-FWV)」
問題と解答:全160問

試験番号:JN0-532問題集
試験科目:Juniper 「FWV,Specialist (JNCIS -FWV)」
問題と解答:全146問

試験番号:JN0-560問題集
試験科目:Juniper 「Certified Internet Associate.....」
問題と解答:全120問

試験番号:JN0-570問題集
試験科目:Juniper 「JN0-570 JNCIS-SSL EXAM」
問題と解答:全150問

試験番号:JN0-330問題集
試験科目:Juniper 「JN0-330-Enhanced Services, Specialist(JNCIS-ES)」
問題と解答:全150問

いつもあなたに最高のJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330認定試験に関連する試験参考書を与えられるために、IT-Passports.comは常に問題集の質を改善し、ずっと最新の試験のシラバスに応じて問題集を更新しています。現在の市場では、IT-Passports.comはあなたの最もよい選択です。長い間にわたって、IT-Passports.comは多くの受験生に認可されました。私を信じていないなら、周りの人々に聞いてみてもいいです。IT-Passports.comの試験問題集を利用したことがある人がきっといますから。IT-Passports.comは最優秀な試験JN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330参考書を提供してあなたを試験に合格させることを保証します。

JuniperのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330認定試験に受かるためにがんばって勉強していれば、IT-Passports.comはあなたにヘルプを与えます。IT-Passports.com が提供したJuniperのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330問題集は実践の検査に合格したもので、最も良い品質であなたがJuniperのJN0-331 JN0-522 JN0-532 JN0-560 JN0-570 JN0-330認定試験に合格することを保証します。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-330.html

NO.1 You want to create a policy allowing traffic from any host in the Trust zone to hostb.example.com
(172.19.1.1) in the
Untrust zone. How do you do create this policy?
A. Specify the IP address (172.19.1.1/32) as the destination address in the policy.
B. Specify the DNS entry (hostb.example.com.) as the destination address in the policy.
C. Create an address book entry in the Trust zone for the 172.19.1.1/32 prefix and reference this entry in
the policy.
D. Create an address book entry in the Untrust zone for the 172.19.1.1/32 prefix and reference this entry
in the policy.
Answer: D

Juniper認定試験   JN0-330   JN0-330

NO.2 Click the Exhibit button.
In the exhibit, what is the purpose of this OSPF configuration?
A. The router sends the file debugOSPF (containing hellos sent and LSA updates) to the syslog server.
B. The router traces both OSPF hellos sent and LSA updates, and stores the results in the debugOSPF
file.
C. The router traces both OSPF hellos sent and LSA updates, and sends the results to the syslog process
with the debugOSPF facility.
D. The router traces all OSPF operations, stores the results in the debugOSPF file, and marks both hellos
sent and LSAupdates in the file with a special flag.
Answer: B

Juniper   JN0-330   JN0-330

NO.3 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. network address translation
Answer: B

Juniper練習問題   JN0-330   JN0-330問題集   JN0-330認定試験   JN0-330練習問題   JN0-330認定資格

NO.4 Click the Exhibit button.
Based on the exhibit, client PC 192.168.10.10 cannot ping 1.1.1.2.
Which is a potential cause for this problem?
A. The untrust zone does not have a management policy configured.
B. The trust zone does not have ping enabled as host-inbound-traffic service.
C. The security policy from the trust zone to the untrust zone does not permit ping.
D. No security policy exists for the ICMP reply packet from the untrust zone to the trust zone.
Answer: C

Juniper練習問題   JN0-330認証試験   JN0-330   JN0-330

NO.5 Which two statements regarding asymmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: BC

Juniper   JN0-330認定資格   JN0-330

NO.6 You are not able to telnet to the interface IP of your JUNOS software with enhanced services device
from a PC on the same subnet. What is causing the problem?
A. Telnet is not being permitted by self policy.
B. Telnet is not being permitted by security policy.
C. Telnet is not allowed because it is not considered secure.
D. Telnet is not enabled as a host-inbound service on the zone.
Answer: D

Juniper認定試験   JN0-330認定証   JN0-330   JN0-330   JN0-330

NO.7 Click the Exhibit button.
host_a is in subnet_a and host_b is in subnet_b.
Given the configuration shown in the exhibit, which statement is true about traffic from host_a to host_b?
A. DNS traffic is denied.
B. Telnet traffic is denied.
C. SMTP traffic is denied.
D. Ping traffic is permitted.
Answer: B

Juniper参考書   JN0-330   JN0-330認定試験

NO.8 Click the Exhibit button.
Based on the configuration shown in the exhibit, what will happen to the traffic matching the security
policy?
A. The traffic is permitted through the myTunnel IPSec tunnel only on Tuesdays.
B. The traffic is permitted through the myTunnel IPSec tunnel daily, with the exception of Mondays.
C. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
7:00 am and 6:00 pm, and Thursdays between 7:00 am and 6:00 pm.
D. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
6:01 pm and 6:59 am, and Thursdays between 6:01 pm and 6:59 am.
Answer: C

Juniper認定試験   JN0-330認定試験   JN0-330   JN0-330認定試験

NO.9 Using a policy with the policy-rematch flag enabled, what happens to the existing and new sessions
when you change the policy action from permit to deny?
A. The new sessions matching the policy are denied. The existing sessions are dropped.
B. The new sessions matching the policy are denied. The existing sessions, not being allowed to carry
any traffic, simply timeout.
C. The new sessions matching the policy might be allowed through if they match another policy. The
existing sessions are dropped.
D. The new sessions matching the policy are denied. The existing sessions continue until they are
completed or their timeout is reached.
Answer:A

Juniper   JN0-330認定証   JN0-330   JN0-330   JN0-330

NO.10 Which statement is true about interface-based static NAT?
A. It also supports PAT.
B. It requires you to configure address entries in the junos-nat zone.
C. It requires you to configure address entries in the junos-global zone.
D. The IP addresses being translated must be in the same subnet as the incoming interface.
Answer: D

Juniper認証試験   JN0-330認定試験   JN0-330認証試験   JN0-330   JN0-330認定資格

NO.11 Which parameters must you select when configuring operating system probes SCREEN options?
A. syn-fin, syn-flood, and tcp-no-frag
B. syn-fin, port-scan, and tcp-no-flag
C. syn-fin, fin-no-ack, and tcp-no-frag
D. syn-fin, syn-ack-ack-proxy, and tcp-no-frag
Answer: C

Juniper   JN0-330認定試験   JN0-330   JN0-330練習問題   JN0-330

NO.12 Which two are components of the enhanced services software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC

Juniper   JN0-330   JN0-330参考書   JN0-330認定試験

NO.13 In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device?
A. This interface is a system-created interface.
B. This interface belongs to NODE0 of the cluster.
C. This interface belongs to NODE1 of the cluster.
D. This interface will not exist because J6350 routers have only six slots.
Answer: C

Juniper   JN0-330   JN0-330認証試験   JN0-330   JN0-330

NO.14 A route-based VPN is required for which scenario?
A. when the remote VPN peer is behind a NAT device
B. when multiple networks need to be reached across the tunnel
C. when the remote VPN peer is a dialup or remote access client
D. when a dynamic routing protocol such as OSPF is required across the VPN
Answer: D

Juniper   JN0-330   JN0-330   JN0-330

NO.15 Click the Exhibit button.
In the exhibit, which statement is correct?
A. Three physical interfaces are redundant.
B. You must define an additional Redundancy Group.
C. node 0 will immediately become primary in the cluster.
D. You must issue an operational command and reboot the system for the above configuration to take
effect.
Answer: D

Juniper練習問題   JN0-330   JN0-330   JN0-330   JN0-330

NO.16 Which command allows you to view the router's current priority for VRRP group 100 on interface
ge-0/0/1.0?
A. show vrrp
B. show vrrp group 100
C. show interfaces ge-0/0/1.0 vrrp group 100
D. show interfaces vrrp ge-0/0/1.0 group 100
Answer:A

Juniper認証試験   JN0-330   JN0-330   JN0-330参考書

NO.17 Which three security concerns can be addressed by a tunnel mode IPSec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer:ACE

Juniper   JN0-330   JN0-330   JN0-330練習問題   JN0-330

NO.18 You must configure a SCREEN option that would protect your router from a session table flood.
Which configuration meets this requirement?
A. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
icmp {
ip-sweep threshold 5000;
flood threshold 2000;
}
B. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
tcp {
syn-flood {
attack-threshold 2000;
destination-threshold 2000;
}
C. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
udp {
flood threshold 5000;
}
D. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
limit-session {
source-ip-based 1200;
destination-ip-based 1200;
}
Answer: D

Juniper   JN0-330認定資格   JN0-330   JN0-330   JN0-330

NO.19 Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and
network mask
of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This
host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to
make the HTTP service on the host reachable from the Internet.
On which IP address and TCP port can Internet hosts reach the HTTP service?
A. IP address 10.10.10.1 and TCP port 8080
B. IP address 71.33.252.17 and TCP port 80
C. IP address 71.33.251.19 and TCP port 80
D. IP address 71.33.252.19 and TCP port 8080
Answer: D

Juniper認定試験   JN0-330認定試験   JN0-330

NO.20 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections. How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D

Juniper   JN0-330   JN0-330問題集   JN0-330   JN0-330

NO.21 Click the Exhibit button.
Which type of source NAT is configured in the exhibit?
A. static source pool
B. interface source pool
C. source pool with PAT
D. souce pool without PAT
Answer:A

Juniper認定試験   JN0-330参考書   JN0-330認定証   JN0-330   JN0-330練習問題

NO.22 Which two are components of the JUNOS software's routing policy? (Choose two.)
A. route-map
B. prefix-list
C. distribute-list
D. policy-statement
Answer: BD

Juniper認定証   JN0-330問題集   JN0-330

NO.23 Click the Exhibit button.
In the exhibit, what is the priority for Router B in VRRP group 100?
A. 1
B. 100
C. 110
D. 255
Answer: B

Juniper過去問   JN0-330   JN0-330問題集

NO.24 Which three parameters are configured in the IKE policy? (Choose three.)
A. mode
B. preshared key
C. external interface
D. security proposals
E. dead peer detection settings
Answer: ABD

Juniper問題集   JN0-330練習問題   JN0-330

NO.25 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the router itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

Juniper過去問   JN0-330過去問   JN0-330過去問

NO.26 Which two are characteristics of link-state routing protocols? (Choose two.)
A. Routers choose a best path for a destination based on the SPF algorithm.
B. All routers in a given area or level build a consistent database describing the network's topology.
C. Routers choose the best path for a destination based on the interface on which they received the link
stateadvertisement with the lowest cost.
D. All routers in a given area or level forward link state advertisements between interfaces in the same
area or level,
adding their metric to the link state advertisement's cost information when they forward it.
Answer:AB

Juniper   JN0-330   JN0-330

NO.27 In JUNOS software with enhanced services, which three packet elements are inspected to determine
if a session
already exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer:ACE

Juniper認証試験   JN0-330認証試験   JN0-330過去問   JN0-330認定資格

NO.28 On which three traffic types does firewall pass-through authentication work? (Choose three.)
A. ping
B. FTP
C. Telnet
D. HTTP
E. HTTPS
Answer: BCD

Juniper   JN0-330認証試験   JN0-330   JN0-330問題集   JN0-330練習問題

NO.29 You want to enable SSH and Telnet access to the router's CLI. Under which configuration hierarchy
would you enable these protocols?
A. [edit system cli]
B. [edit security cli]
C. [edit system services]
D. [edit security services]
Answer: C

Juniper   JN0-330   JN0-330過去問

2014年3月26日星期三

Juniper JN0-522 JN0-532 JN0-560認定試験に適した最新問題集が登場

どのようにすればもっと楽にJuniperのJN0-522 JN0-532 JN0-560認定試験に合格することができるかについて考えたことがありますか。試験に合格する秘密を見つけましたか。それを行う方法がわからない場合、私は教えてあげましょう。実際には、認定試験に合格できる方法が多くあります。試験に関連する知識を一生懸命習得することがただ一つの方法です。今はそのようにしていますか。しかし、これが一番時間を無駄にして、望ましい効果を得られない方法です。それに、毎日仕事で忙しいあなたは、恐らく試験に準備する充分な時間がないでしょう。では、IT-Passports.comのJN0-522 JN0-532 JN0-560問題集を試しましょう。この試験参考書はきっとあなたに思えぬ良い結果を与えられます。

IT-Passports.comのJuniperのJN0-522 JN0-532 JN0-560試験トレーニング資料はIT認証試験を受ける人々の必需品です。このトレーニング資料を持っていたら、試験のために充分の準備をすることができます。そうしたら、試験に受かる信心も持つようになります。IT-Passports.comのJuniperのJN0-522 JN0-532 JN0-560試験トレーニング資料は特別に受験生を対象として研究されたものです。インターネットでこんな高品質の資料を提供するサイトはIT-Passports.comしかないです。

JuniperのJN0-522 JN0-532 JN0-560認定試験を受験したいですか。試験がたいへん難しいですから悩んでいるのですか。試験を申し込みたいですが、合格できないことが心配します。いまこのような気持ちを持っていますか。大丈夫ですよ。安心にJN0-522 JN0-532 JN0-560試験を申し込みましょう。IT-Passports.comの試験参考書を使用する限り、どんなに難しい試験でも問題にならないです。試験に合格する自信を全然持っていなくても、IT-Passports.comのJN0-522 JN0-532 JN0-560問題集はあなたが一度簡単に成功することを保証できます。不思議と思っていますか。では、IT-Passports.comのウェブサイトへ来てもっと多くの情報をブラウズすることもできます。それに、JN0-522 JN0-532 JN0-560問題集の一部を試用することもできます。そうすると、この参考書が確かにあなたが楽に試験に合格する保障ということをきっと知るようになります。

試験番号:JN0-522問題集
試験科目:Juniper 「FXV,Associate (JNCIA-FWV)」
問題と解答:全160問

試験番号:JN0-532問題集
試験科目:Juniper 「FWV,Specialist (JNCIS -FWV)」
問題と解答:全146問

試験番号:JN0-560問題集
試験科目:Juniper 「Certified Internet Associate.....」
問題と解答:全120問

まだJuniperのJN0-522 JN0-532 JN0-560認定試験を悩んでいますかこの情報の時代の中で専門なトレーニングを選択するのと思っていますか?良いターゲットのトレーニングを利用すれば有効で君のIT方面の大量の知識を補充 できます。JuniperのJN0-522 JN0-532 JN0-560認定試験によい準備ができて、試験に穏やかな心情をもって扱うことができます。IT-Passports.comの専門家が研究された問題集を利用してください。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/jn0-522.html

NO.1 Which command can you use to view the log of IKE negotiations and results?
A.get event type 536
B.get ike cookie
C.get sa active
D.debug ike basic
Answer:A

Juniper認定資格   JN0-522認定証   JN0-522   JN0-522   JN0-522   JN0-522

NO.2 You enter the following command: set int e0/8 mip 1.1.8.32 host 10.1.10.32 netmask 255.255.255.255
How many MIP address translations have you just configured?
A.1
B.8
C.128
D.256
Answer:A

Juniper認定証   JN0-522   JN0-522認証試験

NO.3 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer:A

Juniper   JN0-522認定証   JN0-522練習問題   JN0-522   JN0-522認定試験

NO.4 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer:A B

Juniper認定試験   JN0-522   JN0-522認定証   JN0-522練習問題

NO.5 Click the Exhibit button. In the exhibit, which routing command would allow host A to communicate with
host C? (Note: Assume a route from the SSG 20 to host A's subnet already exists.)
A.set route 0.0.0.0/0 int e0/3 gateway 177.11.56.254
B.set route 1.1.70.0 interface e0/3 gateway 177.11.56.254
C.configure route 1.1.70.0/24 gateway 177.11.56.254 int e0/3
D.set route 1.1.70.0/24 interface e0/3 gateway 177.11.56.254
Answer:D

Juniper   JN0-522過去問   JN0-522認定証   JN0-522認定証

NO.6 Which ScreenOS CLI command is required to enable a policy during specified times, days, or dates?
A.set time
B.set clock
C.set calendar
D.set scheduler
Answer:D

Juniper   JN0-522問題集   JN0-522   JN0-522

NO.7 Click the Exhibit button. Traffic from the Internet to the partner servers must use a VIP. In the exhibit,
what is true about the configuration of this feature?
A.You cannot use a VIP in this environment.
B.The VIP can be configured on the e0/4 interface.
C.The VIP can be configured in the Corporate or Internet zone using a different subnet than the physical
interface.
D.The VIP will work only if the destination ports in the incoming packet headers are mapped to the same
ports in the Corporate zone.
Answer:A

Juniper認定試験   JN0-522認定証   JN0-522   JN0-522認定試験

NO.8 Which ScreenOS CLI command would be useful for troubleshooting a policy deny?
A.get flow debug
B.debug flow basic
C.exec flow analysis
D.debug session basic
Answer:B

Juniper   JN0-522   JN0-522   JN0-522認定試験

NO.9 What needs to be configured in Phase 2 of a route-based VPN, that does not need to be configured in a
policy-based VPN?
A.proxy-id
B.tunnel-binding
C.transport mode
D.custom proposals
Answer:B

Juniper   JN0-522   JN0-522参考書   JN0-522問題集

NO.10 Click the Exhibit button. In the exhibit, if host A initiates a Web browsing session with host D, and the
E0/1 interface of the SSG 20 is in NAT mode, what will be the source address of the packet arriving at
host D?
A.10.1.1.1
B.10.1.10.5
C.143.45.56.1
D.143.45.56.254
Answer:C

Juniper問題集   JN0-522認定資格   JN0-522問題集   JN0-522

NO.11 Which ScreenOS CLI command would be used to view traffic logs?
A.get traffic
B.get log policy
C.get policy log
D.get log traffic
Answer:D

Juniper練習問題   JN0-522練習問題   JN0-522認定試験   JN0-522

NO.12 Click the Exhibit button. In the exhibit, what is the correct command to configure a default route on the
SSG 20?
A.set route 0.0.0.0/0 vrouter untrust
B.set route 0.0.0.0/0 interface e0/4 gateway 143.45.56.254
C.set route 0.0.0.0/0 interface e0/4 next-hop 143.45.56.254
D.set route 0.0.0.0/0 interface 143.45.56.1 gate 143.45.56.254
Answer:B

Juniper   JN0-522   JN0-522   JN0-522   JN0-522   JN0-522認証試験

NO.13 Click the Exhibit button. In the exhibit, what is the correct address book entry for host C?
A.set address C 1.1.70.250/32
B.set address Partner C 1.1.70.250
C.set address Partner 1.1.70.250/32
D.set address Partner C 1.1.70.250/32
Answer:D

Juniper   JN0-522   JN0-522練習問題   JN0-522   JN0-522認証試験

NO.14 You want to minimize the number of IP addresses, subnets, and policies in use. How should you
configure your tunnel interface?
A.Configure the tunnel interface with an IP address with a 32 bit subnet mask.
B.Configure the tunnel interface with an IP address with a 30 bit subnet mask.
C.Configure the tunnel interface as unnumbered and place the interface in the same zone as the
designated interface.
D.Configure the tunnel interface as unnumbered, but place the tunnel interface in a different zone than the
designated interface.
Answer:C

Juniper   JN0-522   JN0-522過去問   JN0-522

NO.15 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer:D

Juniper問題集   JN0-522   JN0-522認証試験   JN0-522認定資格

NO.16 Your VPN tunnel does not pass traffic. You run the get ike cookie command and discover that there is no
cookie. Which two should be verified? (Choose two.)
A.routes
B.Phase 1 configuration options
C.Phase 2 configuration options
D.selected quick mode encryption algorithms
Answer:A B

Juniper練習問題   JN0-522   JN0-522問題集   JN0-522参考書   JN0-522参考書

NO.17 Which statement is correct about tunnel interfaces?
A.They can have overlapping IP addresses.
B.They need to be configured in the zone where the protected resources reside.
C.They can be unnumbered and used in policy-based translations if the interface is in route mode.
D.They can be unnumbered from any interface residing on the same virtual router as the protected
resources.
Answer:D

Juniper   JN0-522問題集   JN0-522   JN0-522   JN0-522

NO.18 Assuming factory default settings, which statement describes the minimum requirements for WebUI
management access to the SSG 5?
A.Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access
192.168.1.1.
B.Terminate the bootup sequence from the console device, open a browser on the console device and
access 192.168.1.1.
C.Connect a PC addressed on the 192.168.1.0 subnet, to the highest numbered interface and open a
browser and access 192.168.1.1.
D.Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a
browser to the interface address.
Answer:C

Juniper認証試験   JN0-522問題集   JN0-522   JN0-522   JN0-522認定証   JN0-522認定資格

NO.19 Which ScreenOS CLI policy statement keyword would enable a policy only during specified times, days,
and/or dates?
A.at
B.calendar
C.schedule
D.scheduler
Answer:C

Juniper   JN0-522   JN0-522過去問   JN0-522認定資格

NO.20 Click the Exhibit button. In the exhibit, which two forms of address translation would have generated
the output shown? (Choose two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer:B C

Juniper参考書   JN0-522認定試験   JN0-522

2014年1月23日星期四

実際試験を模擬するJuniper JN0-560試験問題集のソフト版を紹介

ショートカットを選択し、テクニックを使用するのはより良く成功できるからです。JN0-560認定試験に一発合格できる保障を得たいなら、IT-Passports.com のJN0-560問題集はあなたにとってユニークな、しかも最良の選択です。これは賞賛の声を禁じえない参考書です。この問題集より優秀な試験参考書を見つけることができません。このJN0-560問題集では、あなたが試験の出題範囲をより正確に理解することができ、よりよく試験に関連する知識を習得することができます。そして、もし試験の準備をするが足りないとしたら、JN0-560問題集に出る問題と回答を全部覚えたらいいです。この問題集には実際のJN0-560試験問題のすべてが含まれていますから、それだけでも試験に受かることができます。

「今の生活と仕事は我慢できない。他の仕事をやってみたい。」このような考えがありますか。しかし、どのようにより良い仕事を行うことができますか。ITが好きですか。ITを通して自分の実力を証明したいのですか。IT業界に従事したいなら、IT認定試験を受験して認証資格を取得することは必要になります。あなたが今しなければならないのは、広く認識された価値があるIT認定試験を受けることです。そうすれば、新たなキャリアへの扉を開くことができます。JuniperのJN0-560認定試験というと、きっとわかっているでしょう。この資格を取得したら、新しい仕事を探す時、あなたが大きなヘルプを得ることができます。何ですか。自信を持っていないからJN0-560試験を受けるのは無理ですか。それは問題ではないですよ。あなたはIT-Passports.comのJN0-560問題集を利用することができますから。

JuniperのJN0-560認定試験は競争が激しい今のIT業界中でいよいよ人気があって、受験者が増え一方で難度が低くなくて結局専門知識と情報技術能力の要求が高い試験なので、普通の人がJuniper認証試験に合格するのが必要な時間とエネルギーをかからなければなりません。

あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっとそれを望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。では、IT業種で仕事しているあなたはどうやって自分のレベルを高めるべきですか。実は、JN0-560認定試験を受験して認証資格を取るのは一つの良い方法です。Juniperの認定試験のJN0-560資格は非常に大切なものですから、Juniperの試験を受ける人もますます多くなっています。

IT-Passports.comは多くのIT職員の夢を達成することであるウェブサイトです。IT夢を持っていたら、速くIT-Passports.comに来ましょう。 IT-Passports.comにはすごいトレーニング即ち JuniperのJN0-560試験トレーニング資料があります。これはIT職員の皆が熱望しているものです。あなたが試験に合格することを助けられますから。

試験番号:JN0-560問題集
試験科目:Juniper 「Certified Internet Associate.....」
問題と解答:全120問

IT-Passports.comはJuniperのJN0-560認定試験に便利なサービスを提供するサイトで、従来の試験によってIT-Passports.com が今年のJuniperのJN0-560認定試験を予測してもっとも真実に近い問題集を研究し続けます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-560.html

NO.1 Cache Cleaner is primarily used to:
A. Determine which files should be cached between remote access sessions
B. Remove web content downloaded during the remote access session
C. Remove web content cached by the IVE on behalf of the user
D. Prevent users from signing in from insecure machines
Answer: B

Juniper認定証   JN0-560認定資格   JN0-560

NO.2 What is a shortcoming of Core Access?
A. limited auditing
B. no kiosk access
C. limited resource access
D. requires installation privileges
Answer: C

Juniper参考書   JN0-560問題集   JN0-560認証試験   JN0-560認定試験   JN0-560問題集

NO.3 You need to provide support for at least 100 Web connections but want to plan for
a total of 500 simultaneous as part of the growth plan.
Which is the least expensive model of the Secure Access product that meets this
requirement?
A. RA500
B. SA1000
C. SA3000
D. SA5000
E. SM3000
Answer: C

Juniper   JN0-560問題集   JN0-560

NO.4 What is a drawback of using Application Layer Access?
A. limited auding
B. OS/JVM compatibility issues
C. Only TCP/IP level authorization
D. Limited resource access o enterprise web applications and resource
Answer: B

Juniper   JN0-560認定証   JN0-560認定資格

NO.5 JSAM starts, but the client cannot connect:
Which two questions should you consider when troubleshooting this problem?
(Choose Two)
A. is ActiveX allowed in browser?
B. Is the user logged in under the correct account?
C. Does the user have a personal firewall blocking 127x.x.x?
D. Has the host file been rewritten to redirect the traffic to a loopback address?
Answer: C,D

Juniper認証試験   JN0-560認定資格   JN0-560過去問

NO.6 You install Central Manager and now want to filter your logs to extract
information about system events.
What is the easiest way to create simple log filters?
A. You type the query in by hand in the Edit query field, then select Update.
B. You create the query in the query field using the filer variables Dictionary.
C. In the log display, you click on a field containing the value you want to use as a filter.
D. The Central Manager does not allow for customized logging. You must by a special
license to perform log filtering.
Answer: C

Juniper認定資格   JN0-560問題集   JN0-560

NO.7 On an IVE in the default configuration, which URL is valid for administrator
access?
A. http://192.168.1.1
B. https://192.168.1.1
C. http://192.168.1.1/admin
D. https://192.168.1.1/admin
E. https://192.168.1.1/console
Answer: D

Juniper   JN0-560練習問題   JN0-560   JN0-560認定資格   JN0-560練習問題   JN0-560問題集

NO.8 What are two possible reasons for WSAM not starting on the client? (choose two)
A. Java is disabled in the browser
B. Active x is disabled in the browser
C. A popup blocker is installed on the client machine.
D. There is a possible conflict with other LSP-based applications like IPSec, VPN clients
or Spyware.
Answer: B,D

Juniper認定資格   JN0-560   JN0-560   JN0-560

NO.9 What are two functions performed by the inermediation engine?
A. Authorization :This function insures users trying to access the IVE are who they say
they are and then forwards requests o the inside server using those credentials.
B. Authentication: This function insures user trying to access the IVE are who they say
they are and then intermediates requests to the inside server using those credentials.
C. Transformer: This function can modify the "chunked" data stream before it passes he
data to the request handlers. Transformers modify internal URLs, HTML markup and
scripts to refer to "virtual"URLs/markup/scripts sourced from the IVE appliances.
D. Parser: This function processes data streams into chunks that can be manipulated by
the transformers.
Answer: C,D

Juniper   JN0-560認証試験   JN0-560問題集   JN0-560   JN0-560

NO.10 Which three troubleshooting tools are available from the serial console? (Choose
three)
A. ping
B. tcpdump
C. trace route
D. view arp cache
E. add routing table entries
Answer: A,C,D

Juniper認証試験   JN0-560練習問題   JN0-560

NO.11 Which of the following elements can you NO modify on the sign-in page?
A. prompts
B. error messages
C. button text
D. screen size
E. logo
Answer: D

Juniper   JN0-560認証試験   JN0-560認定資格

NO.12 Which three troubleshooting tools are available from the GUI? (Choose three)
A. ping
B. snoop
C. debug
D. tcpdump
E. trace route
Answer: A,D,E

Juniper   JN0-560認定資格   JN0-560過去問   JN0-560   JN0-560練習問題

NO.13 What are two strength of SSL? (Choose two)
A. SSL is familiar o most users.
B. SSL does no need to be installed or configured.
C. SSL outperforms IPSec on every level because it operates at the network layer rather
than the applicationlayer.
D. The SSL client is smaller than most IPSec clients, with half the options to configure
than that of an IPSec clien.
Answer: A,B

Juniper認定試験   JN0-560   JN0-560認証試験

NO.14 What is the purpose of the sing-in policy?
A. The Sign-in Policy controls whether or not a user can sign-in based on role
membership
B. The sign-in policy defines the URLs that users and administrator can use to access the
IVE.
C. The Sign-in Policy controls which options are available on the login screen based on
the users permissions.
D. The Sign-in Policy controls who can actually get to the login page, based on IP
address, certificate information,Host checker and other criteria
Answer: B

Juniper練習問題   JN0-560   JN0-560認定証   JN0-560

NO.15 Which three logs are default log files on the IVE system? (Choose three)
A. Event log
B. Traffic log
C. System log
D. User Access log
E. Admin Access log
Answer: A,D,E

Juniper   JN0-560認証試験   JN0-560   JN0-560過去問   JN0-560

NO.16 Which two can you change via the sign-in page menu option? (Choose two)
A. authorization server
B. authentication realms
C. custom HML file for help
D. text for login screen display
Answer: C,D

Juniper認証試験   JN0-560   JN0-560   JN0-560問題集

NO.17 Which two features are available on an unlicensed IVE? (choose two)
A. SAM
B. File access via a Web interface
C. Ten user access
D. Web access
E. Network Connect
Answer: B,D

Juniper認証試験   JN0-560練習問題   JN0-560認定試験   JN0-560

NO.18 A user is not getting access to needed resources. They are currently unavailable to
work with directly.
What information do you need to use the simulation tool to work on their problem?
(choose three)
A. remain
B. resource
C. username
D. role mapping
E. user password
F. admin override password
Answer: A,B,C

Juniper   JN0-560   JN0-560   JN0-560練習問題

NO.19 A user is not being authenticated properly and has called you for help.
Which two tools help you determine the cause? (Choose two)
A. policy trace
B. policy simulation
C. User Access logs
D. Admin Access logs
Answer: A,C

Juniper練習問題   JN0-560   JN0-560   JN0-560認定資格

NO.20 Host Checker is primarily used to:
A. Remove unwanted files from the remote machine
B. Determine the surety posture of the remote machine
C. Distribute software posture to the remote machine
D. Capture sign in credentials of the remote user
Answer: B

Juniper   JN0-560参考書   JN0-560   JN0-560   JN0-560参考書

IT-Passports.comは実際の環境で本格的なJuniperのJN0-560の試験の準備過程を提供しています。もしあなたは初心者若しくは専門的な技能を高めたかったら、IT-Passports.comのJuniperのJN0-560の試験問題があなたが一歩一歩自分の念願に近くために助けを差し上げます。試験問題と解答に関する質問があるなら、当社は直後に解決方法を差し上げます。しかも、一年間の無料更新サービスを提供します。